3D Printing System Tender

3D Printing System Tender

Multi-Material Polymer Colour 3D Printing System.

United Kingdom-Coventry: Printers and plotters

2016/S 214-390415

Contract notice

Supplies

Directive 2004/18/EC

Section I: Contracting authority

I.1)Name, addresses and contact point(s)

The University of Warwick
University House, The University of Warwick
Contact point(s): Purchasing and Insurance office
For the attention of: Trevor Williams
CV4 8UW Coventry
United Kingdom
Telephone: +44 2476150575
E-mail: t.j.williams@warwick.ac.uk

Internet address(es):

General address of the contracting authority: https://in-tendhost.co.uk/universityofwarwick

Further information can be obtained from: The above mentioned contact point(s)

Specifications and additional documents (including documents for competitive dialogue and a dynamic purchasing system) can be obtained from:The above mentioned contact point(s)

Tenders or requests to participate must be sent to: The above mentioned contact point(s)

I.2)Type of the contracting authority

Other

I.3)Main activity

Education

I.4)Contract award on behalf of other contracting authorities

The contracting authority is purchasing on behalf of other contracting authorities: no

Section II: Object of the contract

II.1)Description

II.1.1)Title attributed to the contract by the contracting authority:

Multi-Material Polymer Colour 3D Printing System.

II.1.2)Type of contract and location of works, place of delivery or of performance

Supplies
Purchase
Main site or location of works, place of delivery or of performance: University of Warwick
Coventry
CV4 7AL.
NUTS code

II.1.3)Information about a public contract, a framework agreement or a dynamic purchasing system (DPS)

The notice involves a public contract
II.1.4)Information on framework agreement

II.1.5)Short description of the contract or purchase(s)

The University of Warwick, Warwick Manufacturing group (WMG) has a requirement for a multi-material polymer colour 3D Printer.

Please refer to http://in-tendhost.co.uk/universityofwarwick for further information. You will be able to download the full tender documents from this site. Any queries in relation to this requirement should be directed to the University of Warwick via the correspondence functionality of the In-tend system. Failure to do so may result in queries being excluded from the procedure.

In order to express interest in this opportunity please go to the University of Warwick In-Tend supplier portal (https://in-tendhost.co.uk/universityofwarwick). All queries must be sent via In-tend Correspondence and not directly to University staff.

Note: The University of Warwick is not a contracting authority for the purposes of the Public Contracts Regulations 2015 (as amended) and its procurement activities are not subject to the Public Contracts Regulations 2015 or the obligations under the European Public Procurement Directives, including the European Remedies Directive. Advertisement of any contract in the Official Journal of the European Union or Contracts Finder is at the sole discretion of the University and is undertaken on a voluntary basis with no implied obligation to comply with the procurement legislation.
All bids must be received by midday 28.11.2016.

II.1.6)Common procurement vocabulary (CPV)

30232100

II.1.7)Information about Government Procurement Agreement (GPA)

The contract is covered by the Government Procurement Agreement (GPA): no

II.1.8)Lots

This contract is divided into lots: no

II.1.9)Information about variants

Variants will be accepted: no
II.2)Quantity or scope of the contract

II.2.1)Total quantity or scope:

Estimated value excluding VAT:
Range: between 190 000 and 220 000 GBP
II.2.2)Information about options
II.2.3)Information about renewals

II.3)Duration of the contract or time limit for completion

Duration in months: 0 (from the award of the contract)

Section III: Legal, economic, financial and technical information

III.1)Conditions relating to the contract

III.1.1)Deposits and guarantees required:

The University’s particular requirements will be set out in the Invitation to Tender documentation and may include, inter alia, performance bond(s) and/or parent company guarantee(s) and/or other forms of security.

III.1.2)Main financing conditions and payment arrangements and/or reference to the relevant provisions governing them:

To be determined. Please refer to tendering documents.

III.1.3)Legal form to be taken by the group of economic operators to whom the contract is to be awarded:

The University’s particular requirements are to be determined but where a consortium or other grouping of suppliers submits a bid, such consortia or grouping must nominate a lead organisation to deal with the Contracting Authority on all matters relating to the Contract. All consortium members or grouping will be required to be jointly and severally liable in respect of the obligations and liabilities relating to the Contract.

III.1.4)Other particular conditions

The performance of the contract is subject to particular conditions: no
III.2)Conditions for participation

III.2.1)Personal situation of economic operators, including requirements relating to enrolment on professional or trade registers

Information and formalities necessary for evaluating if the requirements are met: Please refer to tender documents.

III.2.2)Economic and financial ability

Information and formalities necessary for evaluating if the requirements are met: Please refer to tender documents.
Minimum level(s) of standards possibly required: Please refer to tender documents.

III.2.3)Technical capacity

Information and formalities necessary for evaluating if the requirements are met:
Please refer to tender documents.
Minimum level(s) of standards possibly required:
Please refer to tender documents.
III.2.4)Information about reserved contracts
III.3)Conditions specific to services contracts
III.3.1)Information about a particular profession
III.3.2)Staff responsible for the execution of the service

Section IV: Procedure

IV.1)Type of procedure

IV.1.1)Type of procedure

Open
IV.1.2)Limitations on the number of operators who will be invited to tender or to participate
IV.1.3)Reduction of the number of operators during the negotiation or dialogue
IV.2)Award criteria

IV.2.1)Award criteria

The most economically advantageous tender in terms of the criteria stated in the specifications, in the invitation to tender or to negotiate or in the descriptive document

IV.2.2)Information about electronic auction

An electronic auction will be used: no
IV.3)Administrative information

IV.3.1)File reference number attributed by the contracting authority:

CJ-11-16-WMG-CAT-£DPRINT-GG

IV.3.2)Previous publication(s) concerning the same contract

no

IV.3.3)Conditions for obtaining specifications and additional documents or descriptive document

Time limit for receipt of requests for documents or for accessing documents: 28.11.2016 – 11:00
Payable documents: no

IV.3.4)Time limit for receipt of tenders or requests to participate

28.11.2016 – 12:00
IV.3.5)Date of dispatch of invitations to tender or to participate to selected candidates

IV.3.6)Language(s) in which tenders or requests to participate may be drawn up

English.

IV.3.7)Minimum time frame during which the tenderer must maintain the tender

Duration in months: 6 (from the date stated for receipt of tender)
IV.3.8)Conditions for opening of tenders

Section VI: Complementary information

VI.1)Information about recurrence

This is a recurrent procurement: no

VI.2)Information about European Union funds

The contract is related to a project and/or programme financed by European Union funds: no

VI.3)Additional information

Please refer to http://in-tendhost.co.uk/universityofwarwick for further information and to express interest. You will be able to download the full tender documents from this site. Any queries in relation to this requirement should be directed to the University of Warwick via the correspondence functionality of the In-tend system. Failure to do so may result in queries being excluded from the procedure.

The University expressly reserves the rights:
i) Not to award any contract as a result of this procurement process commenced by publication of this notice.
ii) To make whatever changes it may see fit to the content and structure of the tendering competition.
iii) To award (a) contract(s) in respect of any part(s) of the [services] covered by this notice; and
iv) To award contract(s) in stages.
Under no circumstances will the University be liable for any costs incurred by candidates.
The University of Warwick is not a contracting authority for the purposes of the Public Contracts Regulations 2015 (as amended) and its procurement activities are not subject to the Public Contracts Regulations 2015 or the obligations under the European Public Procurement Directives, including the European Remedies Directive. Advertisement of any contract in the Official Journal of the European Union or Contracts Finder is at the sole discretion of the University and is undertaken on a voluntary basis with no implied obligation to comply with the procurement legislation.

VI.4)Procedures for appeal
VI.4.1)Body responsible for appeal procedures

VI.4.2)Lodging of appeals

Precise information on deadline(s) for lodging appeals: The authority will incorporate a minimum 10 calendar day standstill period at the point that information on the award of the contract is communicated to tenderers. If an appeal regarding the award of contract has not been successfully resolved please flag this via In-Tends communications tool. Any such action must be brought promptly (generally within 30 days).
VI.4.3)Service from which information about the lodging of appeals may be obtained

VI.5)Date of dispatch of this notice:

3.11.2016

 

Related Posts

Catalogue Print and Delivery Yorkshire

Printing Services Contract East Midlands

Magazine Design and Print

Prospectus Printing Contract Chester

Enjoyed this post? Share it!