Automated Building Controls Services Cardiff

Automated Building Controls Services Cardiff

The purpose of this tender exercise is to procure a Building Control Services contract that can be used by all stakeholders in the Council.

United Kingdom-Cardiff: Building installation work

2013/S 245-427077

Contract notice

Services

Directive 2004/18/EC

Section I: Contracting authority

I.1)Name, addresses and contact point(s)

Cardiff Council
County Hall, Atlantic Wharf
Contact point(s): Commissioning and Procurement
For the attention of: Ola Ogunfiditimi
CF10 4UW Cardiff
UNITED KINGDOM
Telephone: +44 2920873746
E-mail: ola.ogunfiditimi@cardiff.gov.uk

Internet address(es):

General address of the contracting authority: http://www.cardiff.gov.uk/content.asp?parent_directory_id=2865

Address of the buyer profile: http://www.sell2wales.gov.uk/search/Search_AuthProfile.aspx?ID=AA0422

Electronic access to information: www.etenderwales.bravosolution.co.uk

Electronic submission of tenders and requests to participate: www.etenderwales.bravosolution.co.uk

Further information can be obtained from: The above mentioned contact point(s)

Specifications and additional documents (including documents for competitive dialogue and a dynamic purchasing system) can be obtained from: Cardiff Council
County Hall, Atlantic Wharf
Contact point(s): Commissioning and Procurement
For the attention of: Ola Ogunfiditimi
CF10 4UW Cardiff
UNITED KINGDOM
Telephone: +44 2920873732
Internet address: http://www.cardiff.gov.uk/content.asp?parent_directory_id=2865

Tenders or requests to participate must be sent to: Cardiff Council
County Hall, Atlantic Wharf
Contact point(s): Comissioning and Procurement
For the attention of: Ola Ogunfiditimi
CF10 4UW Cardiff
UNITED KINGDOM
Telephone: +44 2920873732
Internet address: http://www.cardiff.gov.uk/content.asp?parent_directory_id=2865

I.2)Type of the contracting authority
Regional or local authority
I.3)Main activity
General public services
Environment
Economic and financial affairs
Health
Housing and community amenities
Social protection
I.4)Contract award on behalf of other contracting authorities
The contracting authority is purchasing on behalf of other contracting authorities: no

Section II: Object of the contract

II.1)Description
II.1.1)Title attributed to the contract by the contracting authority:
Automated Building Controls Services.
II.1.2)Type of contract and location of works, place of delivery or of performance
Services
Service category No 1: Maintenance and repair services
Main site or location of works, place of delivery or of performance: Cardiff.
NUTS code UK
II.1.3)Information about a public contract, a framework agreement or a dynamic purchasing system (DPS)
The notice involves a public contract
II.1.4)Information on framework agreement
II.1.5)Short description of the contract or purchase(s)
The purpose of this tender exercise is to procure a Building Control Services contract that can be used by all stakeholders in the Council. The existing contract allows user to maintain and improve controls to heating systems with a graphical interface. This ensures end users (Facilities and Estate Managers), can maximise efficiency of heating systems across the Corporate Estate where installations have been completed. Site currently include core offices and schools.
Note: The authority is using eTenderwales to carry out this procurement process. Please note this is a separate website and if you are not already registered, registration will be required.
To access eTenderwales, express your interest in this notice and access the tender documentation please visit https://etenderwales.bravosolution.co.uk/web/login.shtml and search for PQQ/ITT code Project ID -26832 within the appropriate area.
II.1.6)Common procurement vocabulary (CPV)

45300000

II.1.7)Information about Government Procurement Agreement (GPA)
The contract is covered by the Government Procurement Agreement (GPA): yes
II.1.8)Lots
This contract is divided into lots: no
II.1.9)Information about variants
Variants will be accepted: no
II.2)Quantity or scope of the contract
II.2.1)Total quantity or scope:
Estimated value excluding VAT:
Range: between 375 000 and 400 000 GBP
II.2.2)Information about options
Options: no
II.2.3)Information about renewals
This contract is subject to renewal: no
II.3)Duration of the contract or time limit for completion
Starting 25.2.2014. Completion 30.3.2017

Section III: Legal, economic, financial and technical information

III.1)Conditions relating to the contract
III.1.1)Deposits and guarantees required:
III.1.2)Main financing conditions and payment arrangements and/or reference to the relevant provisions governing them:
III.1.3)Legal form to be taken by the group of economic operators to whom the contract is to be awarded:
III.1.4)Other particular conditions
The performance of the contract is subject to particular conditions: no
III.2)Conditions for participation
III.2.1)Personal situation of economic operators, including requirements relating to enrolment on professional or trade registers
Information and formalities necessary for evaluating if the requirements are met: (1) All candidates will be required to produce a certificate or declaration demonstrating that they are not bankrupt or the subject of an administration order, are not being wound-up, have not granted a trust deed, are not the subject of a petition presented for sequestration of their estate, have not had a receiver, manager or administrator appointed and are not otherwise apparently insolvent.
(2) All candidates will be required to produce a certificate or declaration demonstrating that the candidate, their directors, or any other person who has powers of representation, decision or control of the candidate has not been convicted of conspiracy, corruption, bribery, or money laundering. Failure to provide such a declaration will result in the candidate being declared ineligible and they will not be selected to participate in this procurement process.
(3) All candidates will be required to produce a certificate or declaration demonstrating that they have not been convicted of a criminal offence relating to the conduct of their business or profession.
(4) All candidates will be required to produce a certificate or declaration demonstrating that they have not committed an act of grave misconduct in the course of their business or profession.
(5) All candidates must comply with the requirements of the State in which they are established, regarding registration on the professional or trade register.
(6) Any candidate found to be guilty of serious misrepresentation in providing any information required, may be declared ineligible and not selected to continue with this procurement process.
(7) All candidates will have to demonstrate that they are licensed, or a member of the relevant organisation, in the State where they are established, when the law of that State prohibits the provision of the services, described in this notice, by a person who is not so licensed or who is not a member of the relevant organisation.
(8) All candidates will be required to produce a certificate or declaration demonstrating that they have fulfilled obligations relating to the payment of social security contributions under the law of any part of the United Kingdom or of the relevant State in which the candidate is established
(9) All candidates will be required to produce a certificate or declaration demonstrating that they have fulfilled obligations relating to the payment of taxes under the law of any part of the United Kingdom or of the relevant State in which the economic operator is established.
III.2.2)Economic and financial ability
Information and formalities necessary for evaluating if the requirements are met: (1) All candidates will be required to provide evidence of relevant professional risk indemnity insurance.
(2) All candidates will be required to provide a statement, covering the 3 previous financial years including the overall turnover of the candidate and the turnover in respect of the activities which are of a similar type to the subject matter of this notice.
(3) All candidates will be required to provide statements of accounts or extracts from those accounts relating to their business.
Fruther information is available in PART A section of the Invitation to Tender (ITT).
III.2.3)Technical capacity
Information and formalities necessary for evaluating if the requirements are met:
(1) A statement of the candidate’s average annual number of staff and managerial staff over the previous 3 years;
(2) Details of the educational and professional qualifications of their managerial staff; and those of the person(s) who would be responsible for providing the services or carrying out the work or works under the contract;
(3) All candidates will be required to provide certification from an independent body attesting conformity to environmental management standards in accordance with the Community Eco-Management and Audit Scheme (EMAS); or the European standard BS EN ISO 14001.
(4) Certificates drawn up by official quality control institutes or agencies of recognised competence attesting the conformity of products clearly identified by references to specifications or standards.
(5) Samples, descriptions and/or photographs, the authenticity of which must be certified if the contracting authority so requests.
(6) A statement of the principal goods sold or services provided by the supplier or the services provider in the past 3 years, detailing the dates on which the goods were sold or the services provided; the consideration received; the identity of the person to whom the goods were sold or the services were provided
(7) A statement of the candidate’s technical facilities; measures for ensuring quality; and their study and research facilities;
(8) An indication of the proportion of the contract which the services provider intends possibly to subcontract.
(9) A statement of the technicians or technical services available to the candidate to carry out the work under the contract; or be involved in the production of goods or the provision of services under the contract; particularly those responsible for quality control, whether or not they are independent of the candidate.
(10) A statement of the tools, plant or technical equipment available to the service provider or contractor for carrying out the contract.
(11) A list of works carried out over the past 5 years, detailing the value of the consideration received; when and where the work or works were carried out; and whether they were carried out according to the rules of the trade or profession and properly completed.
Further information is available in the PART B section of the ITT.
III.2.4)Information about reserved contracts
III.3)Conditions specific to services contracts
III.3.1)Information about a particular profession
III.3.2)Staff responsible for the execution of the service

Section IV: Procedure

IV.1)Type of procedure
IV.1.1)Type of procedure
Open
IV.1.2)Limitations on the number of operators who will be invited to tender or to participate
IV.1.3)Reduction of the number of operators during the negotiation or dialogue
IV.2)Award criteria
IV.2.1)Award criteria
The most economically advantageous tender in terms of the criteria stated in the specifications, in the invitation to tender or to negotiate or in the descriptive document
IV.2.2)Information about electronic auction
An electronic auction will be used: no
IV.3)Administrative information
IV.3.1)File reference number attributed by the contracting authority:
364233-2013
IV.3.2)Previous publication(s) concerning the same contract

Prior information notice

Notice number in the OJEU: 2013/S 210-364233 of 29.10.2013

IV.3.3)Conditions for obtaining specifications and additional documents or descriptive document
Time limit for receipt of requests for documents or for accessing documents: 24.1.2014
IV.3.4)Time limit for receipt of tenders or requests to participate
30.1.2014 – 12:00
IV.3.5)Date of dispatch of invitations to tender or to participate to selected candidates
IV.3.6)Language(s) in which tenders or requests to participate may be drawn up
English.
IV.3.7)Minimum time frame during which the tenderer must maintain the tender
Duration in months: 6 (from the date stated for receipt of tender)
IV.3.8)Conditions for opening of tenders

Section VI: Complementary information

VI.1)Information about recurrence
VI.2)Information about European Union funds
VI.3)Additional information
(WA Ref:4783)
VI.4)Procedures for appeal
VI.4.1)Body responsible for appeal procedures
VI.4.2)Lodging of appeals
VI.4.3)Service from which information about the lodging of appeals may be obtained
VI.5)Date of dispatch of this notice:
17.12.2013

Enjoyed this post? Share it!