Building Construction Work Bath

Building Construction Work Bath

Polden Corner Residence Building – Main Contractor.

United Kingdom-Bath: Building construction work

2016/S 034-054369

Contract notice

Works

Directive 2004/18/EC

Section I: Contracting authority

I.1)Name, addresses and contact point(s)

University of Bath
Procurement, Claverton Down
Contact point(s): See Section VI.3)
For the attention of: Mrs Helen Passmore
BA2 7AY Bath
UNITED KINGDOM
Telephone: +44 1225386939
E-mail: h.passmore@bath.ac.uk
Fax: +44 1225386166

Further information can be obtained from: The above mentioned contact point(s)

Specifications and additional documents (including documents for competitive dialogue and a dynamic purchasing system) can be obtained from: The above mentioned contact point(s)

Tenders or requests to participate must be sent to: The above mentioned contact point(s)

I.2)Type of the contracting authority

Body governed by public law

I.3)Main activity

Education
I.4)Contract award on behalf of other contracting authorities

Section II: Object of the contract

II.1)Description

II.1.1)Title attributed to the contract by the contracting authority:

Polden Corner Residence Building – Main Contractor.

II.1.2)Type of contract and location of works, place of delivery or of performance

Works
Realisation, by whatever means of work, corresponding to the requirements specified by the contracting authorities

NUTS code UKK12

II.1.3)Information about a public contract, a framework agreement or a dynamic purchasing system (DPS)
II.1.4)Information on framework agreement

II.1.5)Short description of the contract or purchase(s)

Building construction work. The University of Bath requires a contractor to undertake the construction of a new Post Graduate Accommodation building adjacent to the Polden Court accommodation on the main campus. The project, which is currently being designed, will incorporate 293 en-suite rooms, car parking, energy centre and a gym. Associated facilitating works, temporary works, external works, drainage and services will also be required. Due to the time constraints the University wishes to progress the works in Lot 1 at the earliest opportunity whilst the remainder of the building is being designed.
Lot 1: Circa 1 000 000 GBP — 1 800 000 GBP Ground works; retaining structures and basement up to transfer slab.
Lot 2: Circa 18 000 000 GBP — 20 000 000 GBP Remainder of the build and associated external works.
This project is subject to planning and available funding.
To view this notice, please click here:

https://www.delta-esourcing.com/delta/viewNotice.html?noticeId=189429418

II.1.6)Common procurement vocabulary (CPV)

45210000

II.1.7)Information about Government Procurement Agreement (GPA)

II.1.8)Lots

This contract is divided into lots: yes
Tenders may be submitted for one or more lots
II.1.9)Information about variants
II.2)Quantity or scope of the contract
II.2.1)Total quantity or scope:
II.2.2)Information about options
II.2.3)Information about renewals
II.3)Duration of the contract or time limit for completion

Information about lots

Lot No: 1 Lot title: Ground works, retaining structures and basement up to transfer slab

1)Short description

Ground works, retaining structures and basement up to transfer slab of the new Polden Corner Residence Building.

2)Common procurement vocabulary (CPV)

45210000

3)Quantity or scope
4)Indication about different date for duration of contract or starting/completion
5)Additional information about lots

Lot No: 2 Lot title: Main construction phase.

1)Short description

Main construction phase of the building not including the Enabling works in Lot 1. To include associated external works.

2)Common procurement vocabulary (CPV)

45210000

3)Quantity or scope
4)Indication about different date for duration of contract or starting/completion
5)Additional information about lots

Section III: Legal, economic, financial and technical information

III.1)Conditions relating to the contract
III.1.1)Deposits and guarantees required:

III.1.2)Main financing conditions and payment arrangements and/or reference to the relevant provisions governing them:

Payment in GB Pounds (Sterling) via BACS.

III.1.3)Legal form to be taken by the group of economic operators to whom the contract is to be awarded:

Joint and several liability.
III.1.4)Other particular conditions
III.2)Conditions for participation

III.2.1)Personal situation of economic operators, including requirements relating to enrolment on professional or trade registers

Information and formalities necessary for evaluating if the requirements are met: The Authority will apply all the offences listed in Article 45(1) of Directive 2004/18/EC of the European Parliament and of the Council (implemented as Regulation 23(1) of the Public Contract Regulations (PCR) 2006 in the UK) and all of the professional misconducts listed at Article 45(2) of Directive 2004/18/EC of the European Parliament and of the Council (see also Regulation 23(2) in the PCR 2006) to the decision of whether a Candidate is eligible to be invited to tender.

A full list of the Regulation 23(1) and 23(2) criteria are at http://www.delta-esourcing.com/delta/project/reasonsForExclusion.html#pcr

Candidates will be required to answer these questions as part of the qualification process. For candidates who are registered overseas, you will need to declare if you have any offences/misconduct under your own countries laws, where these laws are equivalent to the Regulation 23 lists.
Candidates who have been convicted of any of the offences under Article 45(1) are ineligible and will not be selected to bid, unless there are overriding requirements in the general interest for doing so.
Candidates who are guilty of any of the offences, circumstances or misconduct under Article 45(2) may be excluded from being selected to bid at the discretion of the Authority.

III.2.2)Economic and financial ability

Information and formalities necessary for evaluating if the requirements are met: (a) Appropriate statements from banks or, where appropriate, evidence of relevant professional risk indemnity insurance;
(b) The presentation of balance-sheets or extracts from the balance-sheets, where publication of the balance-sheet is required under the law of the country in which the economic operator is established;
(c) A statement of the undertaking’s overall turnover and, where appropriate, of turnover in the area covered by the contract for a maximum of the last 3 financial years available, depending on the date on which the undertaking was set up or the economic operator started trading, as far as the information on these turnovers is available.

III.2.3)Technical capacity

Information and formalities necessary for evaluating if the requirements are met:
(b) A list of the principal deliveries effected or the main services provided in the past 3 years, with the sums, dates and recipients, whether public or private, involved. Evidence of delivery and services provided shall be given: — where the recipient was a contracting authority, in the form of certificates issued or countersigned by the competent authority, — where the recipient was a private purchaser, by the purchaser’s certification or, failing this, simply by a declaration by the economic operator;
(c) An indication of the technicians or technical bodies involved, whether or not belonging directly to the economic operator’s undertaking, especially those responsible for quality control and, in the case of public works contracts, those upon whom the contractor can call in order to carry out the work;
(e) Where the products or services to be supplied are complex or, exceptionally, are required for a special purpose, a check carried out by the contracting authorities or on their behalf by a competent official body of the country in which the supplier or service provider is established, subject to that body’s agreement, on the production capacities of the supplier or the technical capacity of the service provider and, if necessary, on the means of study and research which are available to it and the quality control measures it will operate;
(f) The educational and professional qualifications of the service provider or contractor and/or those of the undertaking’s managerial staff and, in particular, those of the person or persons responsible for providing the services or managing the work;
(g) For public works contracts and public services contracts, and only in appropriate cases, an indication of the environmental management measures that the economic operator will be able to apply when performing the contract;
(h) A statement of the average annual manpower of the service provider or contractor and the number of managerial staff for the last 3 years;
(i) A statement of the tools, plant or technical equipment available to the service provider or contractor for carrying out the contract;
(j) An indication of the proportion of the contract which the services provider intends possibly to subcontract;
(k) With regard to the products to be supplied: (i) samples, descriptions and/or photographs, the authenticity of which must be certified if the contracting authority so requests; (ii) certificates drawn up by official quality control institutes or agencies of recognised competence attesting the conformity of products clearly identified by references to specifications or standards.
III.2.4)Information about reserved contracts
III.3)Conditions specific to services contracts
III.3.1)Information about a particular profession
III.3.2)Staff responsible for the execution of the service

Section IV: Procedure

IV.1)Type of procedure

IV.1.1)Type of procedure

Restricted
IV.1.2)Limitations on the number of operators who will be invited to tender or to participate
IV.1.3)Reduction of the number of operators during the negotiation or dialogue
IV.2)Award criteria

IV.2.1)Award criteria

The most economically advantageous tender in terms of the criteria stated in the specifications, in the invitation to tender or to negotiate or in the descriptive document

IV.2.2)Information about electronic auction

An electronic auction will be used: no
IV.3)Administrative information

IV.3.1)File reference number attributed by the contracting authority:

UoBath/Proc/424

IV.3.2)Previous publication(s) concerning the same contract

no
IV.3.3)Conditions for obtaining specifications and additional documents or descriptive document

IV.3.4)Time limit for receipt of tenders or requests to participate

16.3.2016 – 12:00
IV.3.5)Date of dispatch of invitations to tender or to participate to selected candidates

IV.3.6)Language(s) in which tenders or requests to participate may be drawn up

English.
IV.3.7)Minimum time frame during which the tenderer must maintain the tender
IV.3.8)Conditions for opening of tenders

Section VI: Complementary information

VI.1)Information about recurrence
VI.2)Information about European Union funds

VI.3)Additional information

To view this notice, please click here:

https://www.delta-esourcing.com/delta/viewNotice.html?noticeId=189429418

GO Reference: GO-2016215-PRO-7762791.

VI.4)Procedures for appeal

VI.4.1)Body responsible for appeal procedures

University of Bath
Procurement
BA2 7AY Bath
UNITED KINGDOM
Telephone: +44 1225386939

Body responsible for mediation procedures

University of Bath
Procurement
BA2 7AY Bath
UNITED KINGDOM
Telephone: +44 1225386939

VI.4.2)Lodging of appeals

VI.4.3)Service from which information about the lodging of appeals may be obtained

University of Bath
Procurement
BA2 7AY Bath
UNITED KINGDOM
Telephone: +44 1225386939

VI.5)Date of dispatch of this notice:

15.2.2016

Enjoyed this post? Share it!