Civil Engineering Supplies

Civil Engineering Supplies

The supply of civil engineering products including plastic drainage pipe, concrete chamber rings and cover slabs, metal covers and gratings, and general build materials.

UK-Bodmin: Construction materials and associated items

2013/S 005-005570

Contract notice

Supplies

Directive 2004/18/EC

Section I: Contracting authority

I.1)Name, addresses and contact point(s)

Cormac Solutions Limited
Head Office, Castle Canyke Road
For the attention of: Supply Chain and Support Services Manager
PL31 1DZ Bodmin
UNITED KINGDOM
Telephone: +44 1872323313
E-mail: tenders@cormacltd.co.uk
Fax: +44 1872324554

Internet address(es):

General address of the contracting authority: www.cornwall.gov.uk/cormac

Further information can be obtained from: The above mentioned contact point(s)

Specifications and additional documents (including documents for competitive dialogue and a dynamic purchasing system) can be obtained from: The above mentioned contact point(s)

Tenders or requests to participate must be sent to: The above mentioned contact point(s)

I.2)Type of the contracting authority
Body governed by public law
I.3)Main activity
General public services
I.4)Contract award on behalf of other contracting authorities

The contracting authority is purchasing on behalf of other contracting authorities: yes

Cornwall Council
County Hall, Treyew Road
TR1 3AY Truro
UNITED KINGDOM

South West Improvement & Efficiency Partnership
Dennett House, 11 Middle Street
Taunton
UNITED KINGDOM

Section II: Object of the contract

II.1)Description
II.1.1)Title attributed to the contract by the contracting authority:
Civil Engineering Supplies.
II.1.2)Type of contract and location of works, place of delivery or of performance
Supplies
Main site or location of works, place of delivery or of performance: CORMAC Solutions Ltd and Cornwall Council buildings, depots and work sites.
NUTS code UKK3
II.1.3)Information about a public contract, a framework agreement or a dynamic purchasing system (DPS)
The notice involves the establishment of a framework agreement
II.1.4)Information on framework agreement
Framework agreement with a single operator
Duration of the framework agreement

Duration in years: 2
Estimated total value of purchases for the entire duration of the framework agreement

Estimated value excluding VAT: 1 500 000 GBP

II.1.5)Short description of the contract or purchase(s)
The supply of civil engineering products including plastic drainage pipe, concrete chamber rings and cover slabs, metal covers and gratings, and general build materials.
II.1.6)Common procurement vocabulary (CPV)

44100000, 44111100, 44111200, 44111600, 44111800, 44163000, 44113900

II.1.7)Information about Government Procurement Agreement (GPA)
The contract is covered by the Government Procurement Agreement (GPA): no
II.1.8)Lots
This contract is divided into lots: no
II.1.9)Information about variants
Variants will be accepted: no
II.2)Quantity or scope of the contract
II.2.1)Total quantity or scope:
The supply of civil engineering products including (but not limited to) plastic drainage pipe, concrete chamber rings and cover slabs, metal covers and gratings, and general build materials.
Mini competitions may take place for situations where it is economically advantageous. This will include specific schemes for contracts work.
The successful supplier will be expected to achieve on-going savings, improve performance in the provision of materials and to work with CORMAC Solutions to identify areas for continuous improvement and efficiency savings. An annual contract extension may be offered subject to satisfactory performance and price review.
Estimated value excluding VAT: 1 500 000 GBP
II.2.2)Information about options
Options: yes
Description of these options: Option of extending the contract by a further 12 month renewal to a maximum of 2 years.
II.2.3)Information about renewals
This contract is subject to renewal: yes
Number of possible renewals: 1
II.3)Duration of the contract or time limit for completion
Duration in months: 24 (from the award of the contract)

Section III: Legal, economic, financial and technical information

III.1)Conditions relating to the contract
III.1.1)Deposits and guarantees required:
No deposits will be required but where applicable the successful tenderer (or in the case of a consortium bid, each member of the consortium) may be required to provide a parent company guarantee or alternative performance bond.
III.1.2)Main financing conditions and payment arrangements and/or reference to the relevant provisions governing them:
These conditions will be provided in the Invitation to Tender documents.
III.1.3)Legal form to be taken by the group of economic operators to whom the contract is to be awarded:
Joint and several.
III.1.4)Other particular conditions
The performance of the contract is subject to particular conditions: yes
Description of particular conditions: The Framework will be subject to CORMAC Solutions Limited Terms and Conditions of Contract.
III.2)Conditions for participation
III.2.1)Personal situation of economic operators, including requirements relating to enrolment on professional or trade registers
Information and formalities necessary for evaluating if the requirements are met: Parties will be provided with detailed instructions concerning the information they must provide. This will be contained in the Invitation to Tender (ITT) document. Consideration will only be given to those contractors who complete and return the ITT by the required date.
Economic operators subject to any of the following [may/will] not be considered where the said operator
a) is bankrupt or is being wound up, where their affairs are being administered by the court, where they have entered into an arrangement with creditors, where they have suspended business activities or is in any analogous situation arising from a similar procedure under national laws and regulations;
b) is the subject of proceedings for a declaration of bankruptcy, for an order for compulsory winding up or administration by the court or of an arrangement with creditors or of any other similar proceedings under national laws and regulations;
c) has been convicted by a final judgment in accordance with the legal provisions of the country of any offence concerning his professional conduct;
d) has been guilty of grave professional misconduct proven by any means which the contracting authorities can demonstrate;
e) has not fulfilled obligations relating to the payment of social security contributions in accordance with the legal provisions of the country in which they are established or with those of the country of the contracting authority;
f) has not fulfilled obligations relating to the payment of taxes in accordance with the legal provisions of the country in which they are established or with those of the country of the contracting authority;
g) is guilty of serious misrepresentation in supplying the information required under this section or has not supplied such information;
h) has been the subject of a conviction for participation in a criminal organisation, as defined in Article 2(1) of Council Joint Action 98/733/JHA;
i) has been the subject of a conviction for corruption, as defined in Article 3 of the Council Act of 26.6.1972 and Article 3(1) of Council Joint Action 98/742/JHA3 respectively;
j) has been the subject of a conviction for fraud within the meaning of Article 1 of the Convention relating to the protection of the financial interests of the European Communities;
k) has been the subject of a conviction for money laundering, as defined in Article 1 of Council Directive 91/308/EEC of 10.6.1991 on prevention of the use of the financial system for the purpose of money laundering.
III.2.2)Economic and financial ability
Information and formalities necessary for evaluating if the requirements are met: May include, but shall not be limited to
a) a completed Pricing Schedule,
b) a assessment of Company financial standing.
Minimum level(s) of standards possibly required: Please refer to the Invitation to Tender document.
III.2.3)Technical capacity
Information and formalities necessary for evaluating if the requirements are met:
May include, but shall not be limited to
a) the completion and submission of CORMAC Solution’s Health and Safety Questionnaire;
b) an inventory of the delivery resources available to the supplier for carrying out the contract;
c) insurance certificates drawn up by official brokers or agencies.
d) the criteria listed in III.2.1; and
e) any other information or documents referred to in the Invitation to Tender document.
Minimum level(s) of standards possibly required:
Please refer to the Invitation to Tender document.
III.2.4)Information about reserved contracts
III.3)Conditions specific to services contracts
III.3.1)Information about a particular profession
III.3.2)Staff responsible for the execution of the service

Section IV: Procedure

IV.1)Type of procedure
IV.1.1)Type of procedure
Open
IV.1.2)Limitations on the number of operators who will be invited to tender or to participate
IV.1.3)Reduction of the number of operators during the negotiation or dialogue
IV.2)Award criteria
IV.2.1)Award criteria
The most economically advantageous tender in terms of the criteria stated in the specifications, in the invitation to tender or to negotiate or in the descriptive document
IV.2.2)Information about electronic auction
An electronic auction will be used: no
IV.3)Administrative information
IV.3.1)File reference number attributed by the contracting authority:
CSL2012.001F
IV.3.2)Previous publication(s) concerning the same contract
no
IV.3.3)Conditions for obtaining specifications and additional documents or descriptive document
Time limit for receipt of requests for documents or for accessing documents: 24.2.2013 – 15:00
Payable documents: no
IV.3.4)Time limit for receipt of tenders or requests to participate
25.2.2013 – 15:00
IV.3.5)Date of dispatch of invitations to tender or to participate to selected candidates
IV.3.6)Language(s) in which tenders or requests to participate may be drawn up
English.
IV.3.7)Minimum time frame during which the tenderer must maintain the tender
Duration in months: 3 (from the date stated for receipt of tender)
IV.3.8)Conditions for opening of tenders

Section VI: Complementary information

VI.1)Information about recurrence
This is a recurrent procurement: no
VI.2)Information about European Union funds
The contract is related to a project and/or programme financed by European Union funds: no
VI.3)Additional information
VI.4)Procedures for appeal
VI.4.1)Body responsible for appeal procedures
VI.4.2)Lodging of appeals
Precise information on deadline(s) for lodging appeals: At the point at which tenderers and candidates are notified of the contract award decision a minimum 10 calendar day standstill period will apply during which the unsuccessful tenderers and candidates will have the opportunity to appeal against the decision to award before the contract is concluded.
If an appeal regarding the award of the contract has not been successfully resolved, the Public Contracts (Amendment) Regulations 2009 provide for aggrieved parties who have been harmed or believe they are at risk of harm by a breach of the rules to take action in the High Court (England, Wales and Northern Ireland). Any such action must be brought promptly and may take the form of an application for an order to set aside the award decision, suspend the procedure or amend a document, or if the contract has been entered into a claim for a declaration of contract ineffectiveness and/or a claim for damages.
VI.4.3)Service from which information about the lodging of appeals may be obtained

VI.5)Date of dispatch of this notice:4.1.2013

Enjoyed this post? Share it!