Electrical Installation Condition Reports for Salford Council

Electrical Installation Condition Reports for Salford Council

For the provision of inspection and testing of fixed wire electrical circuits to its Corporate and Educational buildings.

United Kingdom-Salford: Repair and maintenance services of electrical and mechanical building installations

2015/S 081-143948

Contract notice

Services

Directive 2004/18/EC

Section I: Contracting authority

I.1)Name, addresses and contact point(s)

Salford City Council
Unity House, Chorley Road
For the attention of: Emma Heyes
M27 5AW Salford
UNITED KINGDOM
Telephone: +44 1616866243
E-mail: emma.heyes@salford.gov.uk

Internet address(es):

General address of the contracting authority: www.salford.gov.uk

Electronic access to information: www.the-chest.org.uk

Electronic submission of tenders and requests to participate: www-the-chest.org.uk

Further information can be obtained from: The above mentioned contact point(s)

Specifications and additional documents (including documents for competitive dialogue and a dynamic purchasing system) can be obtained from: The above mentioned contact point(s)

Tenders or requests to participate must be sent to: The above mentioned contact point(s)

I.2)Type of the contracting authority

Regional or local authority

I.3)Main activity

General public services

I.4)Contract award on behalf of other contracting authorities

The contracting authority is purchasing on behalf of other contracting authorities: no

Section II: Object of the contract

II.1)Description

II.1.1)Title attributed to the contract by the contracting authority:

Electrical Installation Condition Reports.

II.1.2)Type of contract and location of works, place of delivery or of performance

Services
Service category No 1: Maintenance and repair services

NUTS code UKD3

II.1.3)Information about a public contract, a framework agreement or a dynamic purchasing system (DPS)

The notice involves a public contract
II.1.4)Information on framework agreement

II.1.5)Short description of the contract or purchase(s)

Repair and maintenance services of electrical and mechanical building installations. Salford City Council is inviting tenders from suitably qualified companies, for the provision of inspection and testing of fixed wire electrical circuits to its Corporate and Educational buildings. Contractors will be expected to attend sites and carry a full 100 % Fixed Wire Inspection and Testing to BS7671 and Guidance Note 3. The initial contract period will be 36 months with an option to extend for a further 12 months, subject to satisfactory performance and budget provision.

II.1.6)Common procurement vocabulary (CPV)

50710000

II.1.7)Information about Government Procurement Agreement (GPA)

The contract is covered by the Government Procurement Agreement (GPA): no

II.1.8)Lots

This contract is divided into lots: no
II.1.9)Information about variants
II.2)Quantity or scope of the contract

II.2.1)Total quantity or scope:

Salford City Council is inviting tenders from suitably qualified companies, for the provision of inspection and testing of fixed wire electrical circuits to its Corporate and Educational buildings. Contractors will be expected to attend sites and carry a full 100 % Fixed Wire Inspection and Testing to BS7671 and Guidance Note 3. The initial contract period will be 36 months with an option to extend for a further 12 months, subject to satisfactory performance and budget provision.
II.2.2)Information about options
II.2.3)Information about renewals

II.3)Duration of the contract or time limit for completion

Duration in months: 48 (from the award of the contract)

Section III: Legal, economic, financial and technical information

III.1)Conditions relating to the contract
III.1.1)Deposits and guarantees required:
III.1.2)Main financing conditions and payment arrangements and/or reference to the relevant provisions governing them:
III.1.3)Legal form to be taken by the group of economic operators to whom the contract is to be awarded:
III.1.4)Other particular conditions
III.2)Conditions for participation
III.2.1)Personal situation of economic operators, including requirements relating to enrolment on professional or trade registers

III.2.2)Economic and financial ability

Information and formalities necessary for evaluating if the requirements are met: (a) appropriate statements from banks or, where appropriate, evidence of relevant professional risk indemnity insurance;
(b) the presentation of balance-sheets or extracts from the balance-sheets, where publication of the balance-sheet is required under the law of the country in which the economic operator is established;
(c) a statement of the undertaking’s overall turnover and, where appropriate, of turnover in the area covered by the contract for a maximum of the last three financial years available, depending on the date on which the undertaking was set up or the economic operator started trading, as far as the information on these turnovers is available.

III.2.3)Technical capacity

Information and formalities necessary for evaluating if the requirements are met:
(a) a list of the works carried out over the past five years, accompanied by certificates of satisfactory execution for the most important works. These certificates shall indicate the value, date and site of the works and shall specify whether they were carried out according to the rules of the trade and properly completed. Where appropriate, the competent authority shall submit these certificates to the contracting authority direct;
(b) a list of the principal deliveries effected or the main services provided in the past three years, with the sums, dates and recipients, whether public or private, involved. Evidence of delivery and services provided shall be given: – where the recipient was a contracting authority, in the form of certificates issued or countersigned by the competent authority, – where the recipient was a private purchaser, by the purchaser’s certification or, failing this, simply by a declaration by the economic operator;
(c) an indication of the technicians or technical bodies involved, whether or not belonging directly to the economic operator’s undertaking, especially those responsible for quality control and, in the case of public works contracts, those upon whom the contractor can call in order to carry out the work;
(d) a description of the technical facilities and measures used by the supplier or service provider for ensuring quality and the undertaking’s study and research facilities;
(e) where the products or services to be supplied are complex or, exceptionally, are required for a special purpose, a check carried out by the contracting authorities or on their behalf by a competent official body of the country in which the supplier or service provider is established, subject to that body’s agreement, on the production capacities of the supplier or the technical capacity of the service provider and, if necessary, on the means of study and research which are available to it and the quality control measures it will operate;
(f) the educational and professional qualifications of the service provider or contractor and/or those of the undertaking’s managerial staff and, in particular, those of the person or persons responsible for providing the services or managing the work;
(g) for public works contracts and public services contracts, and only in appropriate cases, an indication of the environmental management measures that the economic operator will be able to apply when performing the contract;
(h) a statement of the average annual manpower of the service provider or contractor and the number of managerial staff for the last three years;
(i) a statement of the tools, plant or technical equipment available to the service provider or contractor for carrying out the contract;
(j) an indication of the proportion of the contract which the services provider intends possibly to subcontract;
(k) with regard to the products to be supplied: (i) samples, descriptions and/or photographs, the authenticity of which must be certified if the contracting authority so requests; (ii) certificates drawn up by official quality control institutes or agencies of recognised competence attesting the conformity of products clearly identified by references to specifications or standards.
III.2.4)Information about reserved contracts
III.3)Conditions specific to services contracts
III.3.1)Information about a particular profession
III.3.2)Staff responsible for the execution of the service

Section IV: Procedure

IV.1)Type of procedure

IV.1.1)Type of procedure

Open
IV.1.2)Limitations on the number of operators who will be invited to tender or to participate
IV.1.3)Reduction of the number of operators during the negotiation or dialogue
IV.2)Award criteria

IV.2.1)Award criteria

The most economically advantageous tender in terms of the criteria stated in the specifications, in the invitation to tender or to negotiate or in the descriptive document

IV.2.2)Information about electronic auction

An electronic auction will be used: no
IV.3)Administrative information

IV.3.1)File reference number attributed by the contracting authority:

9TEJ-SPZSJ1

IV.3.2)Previous publication(s) concerning the same contract

no

IV.3.3)Conditions for obtaining specifications and additional documents or descriptive document

Time limit for receipt of requests for documents or for accessing documents: 22.5.2015 – 12:00
Payable documents: no

IV.3.4)Time limit for receipt of tenders or requests to participate

26.5.2015 – 12:00
IV.3.5)Date of dispatch of invitations to tender or to participate to selected candidates

IV.3.6)Language(s) in which tenders or requests to participate may be drawn up

English.
IV.3.7)Minimum time frame during which the tenderer must maintain the tender

IV.3.8)Conditions for opening of tenders

Date: 26.5.2015 – 12:00

Section VI: Complementary information

VI.1)Information about recurrence
VI.2)Information about European Union funds

VI.3)Additional information

The contracting authority considers that this contract may be suitable for economic operators that are small or medium enterprises (SMEs). However, any selection of tenderers will be based solely on the criteria set out for the procurement, and the contract will be awarded on the basis of the most economically advantageous tender. Electronic ordering will be used, electronic invoicing will be accepted and electronic payment will be used.
To view this notice, please click here:

https://www.delta-esourcing.com/delta/viewNotice.html?noticeId=129133855

GO Reference: GO-2015420-PRO-6535298.

VI.4)Procedures for appeal

VI.4.1)Body responsible for appeal procedures

Salford City Council
Unity House, Civic Campus, Chorley Road
M27 6AW Swinton
UNITED KINGDOM
E-mail: procurement@salford.gov.uk
Telephone: +44 1616866243

VI.4.2)Lodging of appeals
VI.4.3)Service from which information about the lodging of appeals may be obtained

VI.5)Date of dispatch of this notice:

20.4.2015

Enjoyed this post? Share it!