Fleet Vehicles Maintenance Tender

Fleet Vehicles Maintenance Tender

Inspection, Service, Mechanical and Electrical Repair of PSNI Fleet vehicles.

United Kingdom-Belfast: Repair and maintenance services of motor vehicles and associated equipment

2015/S 090-161948

Contract notice

Services

Directive 2004/18/EC

Section I: Contracting authority

I.1)Name, addresses and contact point(s)

Police Service of Northern Ireland (PSNI)
C/O Clare House, 303 Airport Road West
Contact point(s): dojprocure.cpd@dfpni.gov.uk
BT3 9ED Belfast
UNITED KINGDOM
E-mail: dojprocure.cpd@dfpni.gov.uk

Internet address(es):

General address of the contracting authority: www.dfpni.gov.uk/cpd

Address of the buyer profile: http://dfpni.gov.uk/cpd

Electronic access to information: http://e-sourcingni.bravosolutions.co.uk/

I.2)Type of the contracting authority

Body governed by public law

I.3)Main activity

Public order and safety

I.4)Contract award on behalf of other contracting authorities

The contracting authority is purchasing on behalf of other contracting authorities: no

Section II: Object of the contract

II.1)Description

II.1.1)Title attributed to the contract by the contracting authority:

PSNI-Inspection, Service, Mechanical and Electrical repair of PSNI Fleet vehicles.

II.1.2)Type of contract and location of works, place of delivery or of performance

Services
Service category No 1: Maintenance and repair services
Main site or location of works, place of delivery or of performance: Winning Suppliers Own Premises.

NUTS code UKN

II.1.3)Information about a public contract, a framework agreement or a dynamic purchasing system (DPS)

The notice involves a public contract
II.1.4)Information on framework agreement

II.1.5)Short description of the contract or purchase(s)

PSNI-Inspection ,Service, Mechanical and Electrical repair of PSNI Fleet vehicles.

II.1.6)Common procurement vocabulary (CPV)

50110000, 50115000

II.1.7)Information about Government Procurement Agreement (GPA)

The contract is covered by the Government Procurement Agreement (GPA): yes

II.1.8)Lots

This contract is divided into lots: yes
Tenders may be submitted for one or more lots

II.1.9)Information about variants

Variants will be accepted: no
II.2)Quantity or scope of the contract

II.2.1)Total quantity or scope:

Lot 1 Category 1 — Soft skin cars and light commercial vehicles.
Lot 2 Category 2 — Motorcycles and Quads.
Estimated value excluding VAT: 9 000 000 GBP

II.2.2)Information about options

Options: yes
Description of these options: 3 x 12 month extension after award up to a final end date of 17.5.2019.
II.2.3)Information about renewals

II.3)Duration of the contract or time limit for completion

Duration in months: 48 (from the award of the contract)

Information about lots

Lot No: 2Lot title: Category 2 — Motorcycles and Quads

1)Short description

Category 2 — Motorcycles and Quads.

2)Common procurement vocabulary (CPV)

50115000

3)Quantity or scope

Category 2 — Motorcycles and Quads. this is available in 4 geographical areas within northern Ireland as per the Map included within the Tender Documentation.
Estimated value excluding VAT: 1 500 000 GBP

4)Indication about different date for duration of contract or starting/completion

Completion 17.5.2019

5)Additional information about lots

Suppliers Instructions How to Express Interest in this Tender: 1. Register your company on the eSourcing portal (this is only required once): https://e-sourcingni.bravosolution.co.uk and click the link to register — Accept the terms and conditions and click ‘I agree’ — Enter your correct business and user details — Note the username you chose and click ‘Save’ when complete — You will shortly receive an email with your unique password (please keep this secure) 2. Express an Interest in the tender — Login to the portal with the username/password — Click the ‘PQQs / ITTs Open To All Suppliers’ link. (These are Pre-Qualification Questionnaires or Invitations to Tender open to any registered supplier) — Click on the relevant PQQ/ ITT to access the content. — Click the ‘Express Interest’ button at the top of the page. — This will move the PQQ /ITT into your ‘My PQQs/ My ITTs’ page. (This is a secure area reserved for your projects only) — You can now access any attachments by clicking ‘Buyer Attachments’ in the ‘PQQ/ ITT Details’ box 3. Responding to the tender — Click ‘My Response’ under ‘PQQ/ ITT Details’, you can choose to ‘Create Response’ or to ‘Decline to Respond’ (please give a reason if declining) — You can now use the ‘Messages’ function to communicate with the buyer and seek any clarification — Note the deadline for completion, then follow the onscreen instructions to complete the PQQ/ ITT — There may be a mixture of online and offline actions for you to perform (there is detailed online help available) You must then submit your reply using the ‘Submit Response’ button at the top of the page. If you require any further assistance please consult the online help, or contact the eTendering help desk.

Lot No: 1Lot title: Category 1 — Soft skin cars and Light Commercials

1)Short description

Category 1 — Soft skin cars and Light Commercials.

2)Common procurement vocabulary (CPV)

50100000

3)Quantity or scope

There are 4 geographical areas as shown in the map which is in the tender documentation.
Estimated value excluding VAT: 7 500 000 GBP

4)Indication about different date for duration of contract or starting/completion

Completion 17.5.2019

5)Additional information about lots

Suppliers Instructions How to Express Interest in this Tender: 1. Register your company on the eSourcing portal (this is only required once): https://e-sourcingni.bravosolution.co.uk and click the link to register — Accept the terms and conditions and click ‘I agree’ — Enter your correct business and user details — Note the username you chose and click ‘Save’ when complete — You will shortly receive an email with your unique password (please keep this secure) 2. Express an Interest in the tender — Login to the portal with the username/password — Click the ‘PQQs / ITTs Open To All Suppliers’ link. (These are Pre-Qualification Questionnaires or Invitations to Tender open to any registered supplier) — Click on the relevant PQQ/ ITT to access the content. — Click the ‘Express Interest’ button at the top of the page. — This will move the PQQ /ITT into your ‘My PQQs/ My ITTs’ page. (This is a secure area reserved for your projects only) — You can now access any attachments by clicking ‘Buyer Attachments’ in the ‘PQQ/ ITT Details’ box 3. Responding to the tender — Click ‘My Response’ under ‘PQQ/ ITT Details’, you can choose to ‘Create Response’ or to ‘Decline to Respond’ (please give a reason if declining) — You can now use the ‘Messages’ function to communicate with the buyer and seek any clarification — Note the deadline for completion, then follow the onscreen instructions to complete the PQQ/ ITT — There may be a mixture of online and offline actions for you to perform (there is detailed online help available) You must then submit your reply using the ‘Submit Response’ button at the top of the page. If you require any further assistance please consult the online help, or contact the eTendering help desk.

Section III: Legal, economic, financial and technical information

III.1)Conditions relating to the contract

III.1.1)Deposits and guarantees required:

None.

III.1.2)Main financing conditions and payment arrangements and/or reference to the relevant provisions governing them:

Payments will be made with 30 days of receipt of a valid invoice.
III.1.3)Legal form to be taken by the group of economic operators to whom the contract is to be awarded:

III.1.4)Other particular conditions

The performance of the contract is subject to particular conditions: yes
Description of particular conditions: Premises of the winning supplier must pass a security inspection subject to the conditions as described in the specification and security schedule.
III.2)Conditions for participation
III.2.1)Personal situation of economic operators, including requirements relating to enrolment on professional or trade registers
III.2.2)Economic and financial ability
III.2.3)Technical capacity
III.2.4)Information about reserved contracts
III.3)Conditions specific to services contracts
III.3.1)Information about a particular profession
III.3.2)Staff responsible for the execution of the service

Section IV: Procedure

IV.1)Type of procedure

IV.1.1)Type of procedure

Open
IV.1.2)Limitations on the number of operators who will be invited to tender or to participate
IV.1.3)Reduction of the number of operators during the negotiation or dialogue
IV.2)Award criteria

IV.2.1)Award criteria

The most economically advantageous tender in terms of the criteria stated in the specifications, in the invitation to tender or to negotiate or in the descriptive document

IV.2.2)Information about electronic auction

An electronic auction will be used: no
IV.3)Administrative information

IV.3.1)File reference number attributed by the contracting authority:

PR17251

IV.3.2)Previous publication(s) concerning the same contract

no

IV.3.3)Conditions for obtaining specifications and additional documents or descriptive document

Time limit for receipt of requests for documents or for accessing documents: 18.6.2015 – 14:59
Payable documents: no

IV.3.4)Time limit for receipt of tenders or requests to participate

18.6.2015 – 15:00
IV.3.5)Date of dispatch of invitations to tender or to participate to selected candidates

IV.3.6)Language(s) in which tenders or requests to participate may be drawn up

English.

IV.3.7)Minimum time frame during which the tenderer must maintain the tender

in days: 180 (from the date stated for receipt of tender)

IV.3.8)Conditions for opening of tenders

Date: 18.6.2015 – 15:01
Place: Central Procurement Directorate
Clare House, 303 Airport Road West
BT3 9ED Belfast
UNITED KINGDOMPersons authorised to be present at the opening of tenders: yes
Additional information about authorised persons and opening procedure: Only CPD Procurement Staff with access to the project on eSourcingNI.

Section VI: Complementary information

VI.1)Information about recurrence

This is a recurrent procurement: no

VI.2)Information about European Union funds

The contract is related to a project and/or programme financed by European Union funds: no

VI.3)Additional information

Suppliers Instructions How to Express Interest in this Tender: 1. Register your company on the eSourcing portal (this is only required once): https://e-sourcingni.bravosolution.co.uk and click the link to register — Accept the terms and conditions and click ‘I agree’ — Enter your correct business and user details — Note the username you chose and click ‘Save’ when complete — You will shortly receive an email with your unique password (please keep this secure) 2. Express an Interest in the tender — Login to the portal with the username/password — Click the ‘PQQs / ITTs Open To All Suppliers’ link. (These are Pre-Qualification Questionnaires or Invitations to Tender open to any registered supplier) — Click on the relevant PQQ/ ITT to access the content. — Click the ‘Express Interest’ button at the top of the page. — This will move the PQQ /ITT into your ‘My PQQs/ My ITTs’ page. (This is a secure area reserved for your projects only) — You can now access any attachments by clicking ‘Buyer Attachments’ in the ‘PQQ/ ITT Details’ box 3. Responding to the tender — Click ‘My Response’ under ‘PQQ/ ITT Details’, you can choose to ‘Create Response’ or to ‘Decline to Respond’ (please give a reason if declining) — You can now use the ‘Messages’ function to communicate with the buyer and seek any clarification — Note the deadline for completion, then follow the onscreen instructions to complete the PQQ/ ITT — There may be a mixture of online and offline actions for you to perform (there is detailed online help available) You must then submit your reply using the ‘Submit Response’ button at the top of the page. If you require any further assistance please consult the online help, or contact the eTendering help desk.

VI.4)Procedures for appeal

VI.4.1)Body responsible for appeal procedures

The UK does not currently have any such bodies with responsibility for appeal/mediation procedures

Body responsible for mediation procedures

The UK does not currently have any such bodies with responsibility for appeal/mediation procedures

VI.4.2)Lodging of appeals

Precise information on deadline(s) for lodging appeals: CPD will incorporate a standstill period at the point information on the award of the contract is communicated to tenderers. That notification will provide full information on the award decision. The standstill period, which will be for a minimum of 10 calendar days, provides time for unsuccessful tenderers to challenge the award decision before the contract is entered into
The Public Contracts Regulations 2015 Public Contracts Regulations 2015 (SI 2015 No 102) provide for aggrieved parties who have been harmed or are at risk of harm by a breach of the rules to take action in the High Court (England, Wales and Northern Ireland). Any such action must generally be brought within 3 months. If a declaration of ineffectiveness is sought, any such action must be brought within 30 days where the Authority has communicated the award of the contract and a summary of reasons to tenderers, or otherwise within 6 months of the contract being entered into. Where a contract has not been entered into the court may order the setting aside of the award decision or order the Authority to amend any document and may award damages. If the contract has been entered into the Court may, depending on the circumstances, award damages, make a declaration of ineffectiveness, order the Authority to pay a fine, and/or order that the duration of the contract be shortened. The purpose of the standstill period referred to above is to allow the parties to apply to the Courts to set aside the award decision before the contract is entered into”.
VI.4.3)Service from which information about the lodging of appeals may be obtained

VI.5)Date of dispatch of this notice:

5.5.2015

Enjoyed this post? Share it!