Framework Agreement for Fabricated Steel and Gate Products

Framework Agreement for Fabricated Steel and Gate Products

Durham County Council is seeking to appoint a framework of Suppliers to supply and deliver fabricated steel and gate products to Durham County Council and affiliated bodies.

United Kingdom-Durham: Mining, basic metals and related products

2016/S 127-228467

Contract notice

Supplies

Directive 2004/18/EC

Section I: Contracting authority

I.1)Name, addresses and contact point(s)

Durham County Council
Corporate Procurement, County Hall
For the attention of: Kelly Stewart
DH1 5UL Durham
United Kingdom
E-mail: kstew@durham.gov.uk

Internet address(es):

General address of the contracting authority: http://www.durham.gov.uk

Further information can be obtained from: The above mentioned contact point(s)

Specifications and additional documents (including documents for competitive dialogue and a dynamic purchasing system) can be obtained from:The above mentioned contact point(s)

Tenders or requests to participate must be sent to: The above mentioned contact point(s)

I.2)Type of the contracting authority

Regional or local authority

I.3)Main activity

General public services
Health

I.4)Contract award on behalf of other contracting authorities

The contracting authority is purchasing on behalf of other contracting authorities: no

Section II: Object of the contract

II.1)Description

II.1.1)Title attributed to the contract by the contracting authority:

Framework Agreement for Fabricated Steel and Gate Products.

II.1.2)Type of contract and location of works, place of delivery or of performance

Supplies
Main site or location of works, place of delivery or of performance: County Durham Area.

NUTS code UKC14

II.1.3)Information about a public contract, a framework agreement or a dynamic purchasing system (DPS)

The notice involves the establishment of a framework agreement

II.1.4)Information on framework agreement

Framework agreement with several operators
maximum number of participants to the framework agreement envisaged: 3

II.1.5)Short description of the contract or purchase(s)

Durham County Council is seeking to appoint a framework of Suppliers to supply and deliver fabricated steel and gate products to Durham County Council and affiliated bodies to the current specification requirements for use throughout County Durham.

II.1.6)Common procurement vocabulary (CPV)

14000000, 44000000

II.1.7)Information about Government Procurement Agreement (GPA)

The contract is covered by the Government Procurement Agreement (GPA): no

II.1.8)Lots

This contract is divided into lots: no
II.1.9)Information about variants
II.2)Quantity or scope of the contract

II.2.1)Total quantity or scope:

Tenders will be evaluated on an essential criteria basis with 100 % of the marks awarded attributable to the price.

II.2.2)Information about options

Options: no

II.2.3)Information about renewals

This contract is subject to renewal: yes
Number of possible renewals: 2
In the case of renewable supplies or service contracts, estimated timeframe for subsequent contracts:
in months: 12 (from the award of the contract)
II.3)Duration of the contract or time limit for completion

Section III: Legal, economic, financial and technical information

III.1)Conditions relating to the contract

III.1.1)Deposits and guarantees required:

The Council reserves the right to require deposits, guarantees, bonds or other forms of appropriate security.
Further details will be set out in the tender documents, if relevant.

III.1.2)Main financing conditions and payment arrangements and/or reference to the relevant provisions governing them:

To be set out within the Tender Documents.

III.1.3)Legal form to be taken by the group of economic operators to whom the contract is to be awarded:

The Council reserves the right to require groupings of service providers to take a particular legal form or to require a single provider to take primary liability or to require each party to undertake joint and several liability, if relevant. Further details will be set out in the tender documents.

III.1.4)Other particular conditions

The performance of the contract is subject to particular conditions: no
III.2)Conditions for participation

III.2.1)Personal situation of economic operators, including requirements relating to enrolment on professional or trade registers

Information and formalities necessary for evaluating if the requirements are met: In accordance with Article 57 of Directive 2014/24/EU of the European Parliament and of the Council and Regulations 57 of the Public Contract Regulations 2015 and as set out in the Tender Documents available from the NEPO Portal as detailed in VI.3).

III.2.2)Economic and financial ability

Information and formalities necessary for evaluating if the requirements are met: In accordance with Article 58 of Directive 2014/24/EU of the European Parliament and of the Council and Regulation 58 of the Public Contract Regulations 2015 and as set out in the Tender documents available from the NEPO Portal as detailed in Section VI.3).
Minimum level(s) of standards possibly required: Minimum level(s) of standards possibly required:
1. Public and Product Liability — 5 000 000 GBP.
2. Employers Liability — 10 000 000 GBP.
3. Motor Vehicle — third party cover required as a minimum.

III.2.3)Technical capacity

Information and formalities necessary for evaluating if the requirements are met:
In accordance with Articles 58 of Directive 2014/24/EU of the European Parliament and of the Council and Regulation 58 of the Public Contract Regulations 2015 and as set out in the Tender Documents available from the NEPO portal as detailed in section VI.3).
Minimum level(s) of standards possibly required:
As set out within the business questionnaire including: grounds for exclusion; insurance; health and safety, equality and diversity and essential criteria which will be scored on a pass fail basis.
III.2.4)Information about reserved contracts
III.3)Conditions specific to services contracts
III.3.1)Information about a particular profession
III.3.2)Staff responsible for the execution of the service

Section IV: Procedure

IV.1)Type of procedure

IV.1.1)Type of procedure

Open
IV.1.2)Limitations on the number of operators who will be invited to tender or to participate
IV.1.3)Reduction of the number of operators during the negotiation or dialogue
IV.2)Award criteria

IV.2.1)Award criteria

The most economically advantageous tender in terms of the criteria stated below

1. Price. Weighting 100

IV.2.2)Information about electronic auction

An electronic auction will be used: no
IV.3)Administrative information

IV.3.1)File reference number attributed by the contracting authority:

DN169663

IV.3.2)Previous publication(s) concerning the same contract

no

IV.3.3)Conditions for obtaining specifications and additional documents or descriptive document

Payable documents: no

IV.3.4)Time limit for receipt of tenders or requests to participate

3.8.2016 – 16:00
IV.3.5)Date of dispatch of invitations to tender or to participate to selected candidates

IV.3.6)Language(s) in which tenders or requests to participate may be drawn up

English.

IV.3.7)Minimum time frame during which the tenderer must maintain the tender

in days: 90 (from the date stated for receipt of tender)

IV.3.8)Conditions for opening of tenders

Date: 8.8.2016 – 13:00
Persons authorised to be present at the opening of tenders: yes
Additional information about authorised persons and opening procedure: Professional Officers of the Council.

Section VI: Complementary information

VI.1)Information about recurrence

This is a recurrent procurement: no

VI.2)Information about European Union funds

The contract is related to a project and/or programme financed by European Union funds: no

VI.3)Additional information

Organisations can register electronically for the documents via www.nepoportal.org https://procontract.duenorth. com/ProjectManagement/ProjectDashboard?projectId=027e0c18-8138-e611-8114-000c29c9ba21

The reference number is DN169663 for the Tender for Framework Agreement for Fabricated Steel and Gate Products.

VI.4)Procedures for appeal
VI.4.1)Body responsible for appeal procedures

VI.4.2)Lodging of appeals

Precise information on deadline(s) for lodging appeals: The contracting Authority will incorporate a standstill period at the point information of the award of the Contract is communicated to bidders. That notification will provide full information on the award decision. The standstill period which will be for a minimum of 10 calendar days, provides time for the unsuccessful bidders to challenge the award decision before the contract is entered into. The Public Regulations 2006 (SI 2006 No 5) (as EN Standard form 02 — Contract notice 12/16 amended) provide the aggrieved parties who have been harmed or at EN Standard form 02 — Contract notice 12 / 21 risk of harm by a breach of the rules to take action in the High EN Standard form 02 — Contract notice 12 / 19 Court (England, Wales and Northern Ireland).
VI.4.3)Service from which information about the lodging of appeals may be obtained

VI.5)Date of dispatch of this notice:

1.7.2016

 

Related Posts

Measured Term Contract for Metalwork and Small Engineering

Purchase of Hand Tools and Small Electrical Equipment Framework

Supply of Small Plant and Spares

Telehandler Request for Quote

Enjoyed this post? Share it!