Glazing Safety Survey Sheffield

Glazing Safety Survey Sheffield

The University of Sheffield is looking to appoint a supplier to undertake a risk assessment of all external and internal glazing to ascertain whether or not there is a risk of injury.


United Kingdom-Sheffield: Risk or hazard assessment other than for construction

2014/S 143-257270

Contract notice

Services

Directive 2004/18/EC

Section I: Contracting authority

I.1)Name, addresses and contact point(s)

University of Sheffield
Floor 5, The Arts Tower, Western Bank
Contact point(s): https://in-tendhost.co.uk/sheffield
For the attention of: Mark Richards
S10 2TN Sheffield
UNITED KINGDOM
Telephone: +44 1142224204
E-mail: m.richards@sheffield.ac.uk

Internet address(es):

General address of the contracting authority: www.sheffield.ac.uk

Address of the buyer profile: https://in-tendhost.co.uk/sheffield

Further information can be obtained from: The above mentioned contact point(s)

Specifications and additional documents (including documents for competitive dialogue and a dynamic purchasing system) can be obtained from: The above mentioned contact point(s)

Tenders or requests to participate must be sent to: The above mentioned contact point(s)

I.2)Type of the contracting authority

Body governed by public law

I.3)Main activity

Education

I.4)Contract award on behalf of other contracting authorities

The contracting authority is purchasing on behalf of other contracting authorities: no

Section II: Object of the contract

II.1)Description

II.1.1)Title attributed to the contract by the contracting authority:

201/MR Glazing Safety Survey.

II.1.2)Type of contract and location of works, place of delivery or of performance

Services
Service category No 12: Architectural services; engineering services and integrated engineering services; urban planning and landscape engineering services; related scientific and technical consulting services; technical testing and analysis services
Main site or location of works, place of delivery or of performance: University off Sheffield Premises.

NUTS code UKE32

II.1.3)Information about a public contract, a framework agreement or a dynamic purchasing system (DPS)

The notice involves a public contract
II.1.4)Information on framework agreement

II.1.5)Short description of the contract or purchase(s)

Tender Opportunity 201/MR – PQQ
The University of Sheffield is looking to appoint a supplier to undertake a risk assessment of all external and internal glazing to ascertain whether or not there is a risk of injury.
All organisations with relevant experience are invited to tender.

This is a restricted EU procurement procedure. The PQQ can be downloaded by registering and expressing your interest on the University”s e-tendering system https://in-tendhost.co.uk/Sheffield.

Completed PQQs must be returned through the same e-tendering system.

If you have any questions or comments in relation to this tendering exercise they must be submitted via the Intend System, this can be accessed at https://in-tendhost.co.uk/Sheffield

The closing date for return of tenders is 12 noon Tuesday 26.8.2014 (UK time)

II.1.6)Common procurement vocabulary (CPV)

907111007100000071250000

II.1.7)Information about Government Procurement Agreement (GPA)

The contract is covered by the Government Procurement Agreement (GPA): yes

II.1.8)Lots

This contract is divided into lots: no

II.1.9)Information about variants

Variants will be accepted: no
II.2)Quantity or scope of the contract
II.2.1)Total quantity or scope:
II.2.2)Information about options
II.2.3)Information about renewals

II.3)Duration of the contract or time limit for completion

Duration in months: 9 (from the award of the contract)

Section III: Legal, economic, financial and technical information

III.1)Conditions relating to the contract

III.1.1)Deposits and guarantees required:

As per tender documentation.

III.1.2)Main financing conditions and payment arrangements and/or reference to the relevant provisions governing them:

As per tender documentation.

III.1.3)Legal form to be taken by the group of economic operators to whom the contract is to be awarded:

Joint and several liability.
III.1.4)Other particular conditions
III.2)Conditions for participation

III.2.1)Personal situation of economic operators, including requirements relating to enrolment on professional or trade registers

Information and formalities necessary for evaluating if the requirements are met: As per tender documentation.

III.2.2)Economic and financial ability

Information and formalities necessary for evaluating if the requirements are met: As per tender documentation.
Minimum level(s) of standards possibly required: As per tender documentation.

III.2.3)Technical capacity

Information and formalities necessary for evaluating if the requirements are met:
As per tender documentation.
Minimum level(s) of standards possibly required:
As per tender documentation.
III.2.4)Information about reserved contracts
III.3)Conditions specific to services contracts

III.3.1)Information about a particular profession

Execution of the service is reserved to a particular profession: no

III.3.2)Staff responsible for the execution of the service

Legal persons should indicate the names and professional qualifications of the staff responsible for the execution of the service: no

Section IV: Procedure

IV.1)Type of procedure

IV.1.1)Type of procedure

Restricted

IV.1.2)Limitations on the number of operators who will be invited to tender or to participate

Envisaged minimum number 3: and maximum number 8
IV.1.3)Reduction of the number of operators during the negotiation or dialogue
IV.2)Award criteria

IV.2.1)Award criteria

The most economically advantageous tender in terms of the criteria stated in the specifications, in the invitation to tender or to negotiate or in the descriptive document

IV.2.2)Information about electronic auction

An electronic auction will be used: no
IV.3)Administrative information

IV.3.1)File reference number attributed by the contracting authority:

201/MR

IV.3.2)Previous publication(s) concerning the same contract

no

IV.3.3)Conditions for obtaining specifications and additional documents or descriptive document

Time limit for receipt of requests for documents or for accessing documents: 25.8.2014
Payable documents: no

IV.3.4)Time limit for receipt of tenders or requests to participate

26.8.2014 – 12:00
IV.3.5)Date of dispatch of invitations to tender or to participate to selected candidates

IV.3.6)Language(s) in which tenders or requests to participate may be drawn up

English.
IV.3.7)Minimum time frame during which the tenderer must maintain the tender

IV.3.8)Conditions for opening of tenders

Date: 26.8.2014 – 12:10

Place:

University of Sheffield premises.

 

Persons authorised to be present at the opening of tenders: yes
Additional information about authorised persons and opening procedure: Procurement team member.

Section VI: Complementary information

VI.1)Information about recurrence

This is a recurrent procurement: no

VI.2)Information about European Union funds

The contract is related to a project and/or programme financed by European Union funds: no
VI.3)Additional information
VI.4)Procedures for appeal
VI.4.1)Body responsible for appeal procedures

VI.4.2)Lodging of appeals

Precise information on deadline(s) for lodging appeals: The contracting authority will incorporate a minimum 10 day standstill period at the point information on the award of contract is communicated to tenders. This period allows unsuccessful tenders seek a further debriefing before the contract is entered into. If an appeal regarding the award of contract cannot be resolved, the Public Contracts regulations 2006 (as amended) provide for aggrieved parties to take action in the High Court (England, Wales and Northern Ireland). Any such action should be brought promptly (generally within 3 months).
VI.4.3)Service from which information about the lodging of appeals may be obtained

VI.5)Date of dispatch of this notice:

24.7.2014

Enjoyed this post? Share it!