Home Office Passport Design and Production Contract

Home Office Passport Design and Production Contract

Contract for the design, production and personalisation of the UK Passport and its Variants and other secure documents.

United Kingdom-London: Passports

2017/S 058-107947

Contract notice

Services

Directive 2014/24/EU

Section I: Contracting authority

I.1)Name and addresses

Secretary of State for the Home Department for and on behalf of the Crown
2 Marsham Street
London
SW1P 4DF
United Kingdom
Contact person: Passport Procurement Team
E-mail: PassportProcurement@hmpo.gsi.gov.uk
NUTS code: UK
I.2)Joint procurement

I.3)Communication

The procurement documents are available for unrestricted and full direct access, free of charge, at: https://gpsesourcing.cabinetoffice.gov.uk/emptoris/sso_login.jsp#/login/loginPage
Additional information can be obtained from the abovementioned address
Tenders or requests to participate must be submitted electronically via: https://gpsesourcing.cabinetoffice.gov.uk/emptoris/sso_login.jsp#/login/loginPage
Tenders or requests to participate must be submitted to the abovementioned address
Electronic communication requires the use of tools and devices that are not generally available. Unrestricted and full direct access to these tools and devices is possible, free of charge, at: https://gpsesourcing.cabinetoffice.gov.uk/emptoris/sso_login.jsp#/login/loginPage

I.4)Type of the contracting authority

Ministry or any other national or federal authority, including their regional or local subdivisions

I.5)Main activity

Public order and safety

Section II: Object

II.1)Scope of the procurement

II.1.1)Title:

Passport Production and Associated Services.

II.1.2)Main CPV code

22451000

II.1.3)Type of contract

Services

II.1.4)Short description:

Contract for the design, production and personalisation of the UK Passport and its Variants and other secure documents.

II.1.5)Estimated total value

Value excluding VAT: 490 000 000.00 GBP

II.1.6)Information about lots

This contract is divided into lots: no
II.2)Description
II.2.1)Title:

II.2.2)Additional CPV code(s)

22456000
22458000
22450000
64121100
48000000

II.2.3)Place of performance

NUTS code: UK

II.2.4)Description of the procurement:

Due to the upcoming expiry of its current passport design, print, assembly and personalisation contract, the Contracting Authority is commencing a procurement in respect of a new contract for passport production and associated services, to include but not be limited to;

— Design, print, assembly and personalisation of the UK Passport and its Variants;

— Design, print, assembly and/or personalisation of other secure travel documents, including Emergency Travel Documents on behalf of the Foreign and Commonwealth Office.

The Contracting Authority issues over 6 000 000 passports annually (with passport Variants accounting for circa 1.2 % of volumes) and is the only provider of passports to British citizens living anywhere globally. The UK passport is a secure travel document which contains many world leading security features; the integrity of which allows British Citizens to travel without a visa to a large number of countries.

Please note, the estimated total value is based on the current unit prices and forecast volumes for this contract. The estimated total contract value is in the region of 490 000 GBP (at 2017 prices and excluding VAT).

II.2.5)Award criteria

Price is not the only award criterion and all criteria are stated only in the procurement documents

II.2.6)Estimated value

Value excluding VAT: 490 000 000.00 GBP

II.2.7)Duration of the contract, framework agreement or dynamic purchasing system

Duration in months: 138
This contract is subject to renewal: yes
Description of renewals:

This contract can be extended for up to 18 months.

II.2.9)Information about the limits on the number of candidates to be invited

Envisaged number of candidates: 6
Objective criteria for choosing the limited number of candidates:

All Bidders who successfully Pass all Selection Questionnaire questions will be invited to the Invitation to Tender (ITT) Stage (the number will not be limited to 6).

The evaluation process will be detailed within the procurement documentation.

II.2.10)Information about variants

Variants will be accepted: no

II.2.11)Information about options

Options: no
II.2.12)Information about electronic catalogues

II.2.13)Information about European Union funds

The procurement is related to a project and/or programme financed by European Union funds: no

II.2.14)Additional information

The Authority is not responsible for any bidding costs incurred by potential suppliers in respect of this procurement. The Authority reserves the right to abandon the competitive process and not award any contract; make any changes it sees as reasonable to the competition; remove and/or amend element(s) from the scope of the requirements; and accept or reject any tender.

Section III: Legal, economic, financial and technical information

III.1)Conditions for participation
III.1.1)Suitability to pursue the professional activity, including requirements relating to enrolment on professional or trade registers

III.1.2)Economic and financial standing

Selection criteria as stated in the procurement documents

III.1.3)Technical and professional ability

Selection criteria as stated in the procurement documents
III.1.5)Information about reserved contracts
III.2)Conditions related to the contract
III.2.1)Information about a particular profession
III.2.2)Contract performance conditions:
III.2.3)Information about staff responsible for the performance of the contract

Section IV: Procedure

IV.1)Description

IV.1.1)Type of procedure

Competitive procedure with negotiation
IV.1.3)Information about a framework agreement or a dynamic purchasing system

IV.1.4)Information about reduction of the number of solutions or tenders during negotiation or dialogue

Recourse to staged procedure to gradually reduce the number of solutions to be discussed or tenders to be negotiated

IV.1.5)Information about negotiation

The contracting authority reserves the right to award the contract on the basis of the initial tenders without conducting negotiations
IV.1.6)Information about electronic auction

IV.1.8)Information about the Government Procurement Agreement (GPA)

The procurement is covered by the Government Procurement Agreement: no
IV.2)Administrative information

IV.2.1)Previous publication concerning this procedure

Notice number in the OJ S: 2016/S 198-357485

IV.2.2)Time limit for receipt of tenders or requests to participate

Date: 24/04/2017
Local time: 14:00

IV.2.3)Estimated date of dispatch of invitations to tender or to participate to selected candidates

Date: 05/06/2017

IV.2.4)Languages in which tenders or requests to participate may be submitted:

English
IV.2.6)Minimum time frame during which the tenderer must maintain the tender
IV.2.7)Conditions for opening of tenders

Section VI: Complementary information

VI.1)Information about recurrence

This is a recurrent procurement: no
VI.2)Information about electronic workflows

VI.3)Additional information:

Bidders are requested to express interest by 14.4.2017, 08:00 UK local time in order to enable the submission of a request to participate by 24.4.2017, 14:00 UK local time.

The process for expression of interest and requesting further information in order to submit a request to participate is set out below.

For the avoidance of doubt, please note that Participants are required to express an interest separately for this competition regardless of their involvement in the previous Market Engagement activities for this project. Any such involvement does not constitute an expression of interest for the competition advertised in this notice.

The Home Office uses an eSourcing toolkit to enable its sourcing activities to be conducted over the internet. In order to express an interest and participate in this procurement, please follow the steps set out below.

The procurement will be managed electronically via the Crown Commercial Service’s e-Sourcing Suite. To participate in this procurement, Bidders must first be registered on the e-Sourcing Suite. If you have not yet registered on the e-Sourcing Suite, this can be done online at https://gpsesourcing.cabinetoffice.gov.uk by following the link ‘Register for CCS e-Sourcing’.

Please note that, to register, you must have a valid DUNS number (as provided by Dun and Bradstreet) for the organisation which you are registering and who will be entering into a contract if invited to do so.

Once registered, organisations expressing an interest in the tender must send an email to: PassportProcurement@hmpo.gsi.gov.uk. The email should be entitled ‘Passport Procurement — Expression of Interest’ and contain the following details: your organisation’s name, your contact name, e-mail address and telephone number.

Any expressions of interest not submitted in the required form (or containing the requested information) may be rejected. Bidders are requested to express interest by 14.4.2017,08:00 UK local time, to allow sufficient time for the administrative process and submission of requests to participate.

The Authority requires Bidders to sign a Non-Disclosure Agreement (NDA) in order to be invited to submit a request to participate. (Please note that this applies even if you have signed a Non-Disclosure Agreement in order to participate in Market Engagement).

On receipt of an email detailed above, the Authority will provide access to the NDA document through the eSourcing portal. The Authority requires Bidders to download and re-attach a signed copy of the NDA to the event. When saving the ‘pdf’ document, please ensure that you include the Bidder organisation’s name in the filename.

Once a correctly signed NDA is received by the Authority, Bidders will be invited to the request to participate event and will be able to access all relevant procurement documentation.

Your request to participate will take the form of a completed Selection Questionnaire. This will be available in the request to participate event.

Clarification requests relating to expressions of interest and/or requests to participate must be submitted no later than 14.4.2017, 08:00 UK local time.

Any requests to participate not submitted in the required format (or containing the requested information) may be rejected.

For technical assistance on use of the e-Sourcing Suite contact; Crown Commercial Service Help-desk: freephone: +44 3450103503 or email: supplier@ccs.gsi.gov.uk.

The Authority reserves the right to award a contract on the basis of initial tenders without negotiation.

The Authority reserves the right to reduce the number of tenders to be negotiated during the negotiation process through the application of the award criteria as detailed within the procurement documentation.

VI.4)Procedures for review

VI.4.1)Review body

N/A
N/A
United Kingdom

VI.4.2)Body responsible for mediation procedures

N/A
N/A
United Kingdom

VI.4.3)Review procedure

Precise information on deadline(s) for review procedures:

N/A

VI.4.4)Service from which information about the review procedure may be obtained

VI.5)Date of dispatch of this notice:

22/03/2017

 

Related Posts

BBC Countryfile Calendar Design and Production Contract

Print Management Services Tender London

Supply of a Managed Print Service

Magazine Design and Print Service

Graphic Design and Print Invitation to Tender

Enjoyed this post? Share it!