Industrial Energy Efficiency Innovation Programme Development and Delivery

Posted on by

Industrial Energy Efficiency Innovation Programme Development and Delivery

The Industrial Energy Efficiency Accelerator programme goal is to increase the range of industrial energy efficient products and processes, and support the wider rollout across industry.

United Kingdom-London: Engineering-related scientific and technical services

2017/S 039-070912

Contract notice

Services

Directive 2014/24/EU

Section I: Contracting authority

I.1)Name and addresses

Department of Energy and Climate Change (DECC)
1 Victoria Street
London
SW1H 0ET
United Kingdom
Contact person: Philip Cohen
Telephone: +44 3000685688
E-mail: industry.innovation@BEIS.gsi.gov.uk
NUTS code: UK
Internet address(es):Main address: www.delta-esourcing.com

Address of the buyer profile: www.delta-esourcing.com

I.2)Joint procurement

I.3)Communication

The procurement documents are available for unrestricted and full direct access, free of charge, at:http://www.delta-esourcing.com/tenders/UK-UK-London:-Engineering-related-scientific-and-technical-services./Q793M8A3FZ
Additional information can be obtained from the abovementioned address
Tenders or requests to participate must be submitted electronically via: www.delta-esourcing.com
Tenders or requests to participate must be submitted to the abovementioned address

I.4)Type of the contracting authority

Body governed by public law

I.5)Main activity

General public services

Section II: Object

II.1)Scope of the procurement

II.1.1)Title:

Support for Development and Delivery of the Industrial Energy Efficiency Innovation Programme (IEEA).

Reference number: 1274/01/2017

II.1.2)Main CPV code

71350000

II.1.3)Type of contract

Services

II.1.4)Short description:

Energy efficiency is widely recognised as a cost-effective route to deliver emission reductions over the short-medium term. It also supports energy security objectives to support the development of technologies, which would enable industry to maintain production levels whilst reducing their energy demand.

The Industrial Decarbonisation and Energy Efficiency Roadmaps to 2050 identified that energy efficiency was a key route to enable industry to start to decarbonise, it also highlighted barriers to further implementation.

The Industrial Energy Efficiency Accelerator (IEEA) programme goal is to increase the range of industrial energy efficient products and processes, and support the wider rollout across industry.

Please see the ITT for more info.

II.1.5)Estimated total value

Value excluding VAT: 1 500 000.00 GBP

II.1.6)Information about lots

This contract is divided into lots: no
II.2)Description
II.2.1)Title:

II.2.2)Additional CPV code(s)

71350000 – DA40
71356300
71600000
71621000

II.2.3)Place of performance

NUTS code: UK
Main site or place of performance:

United Kingdom.

II.2.4)Description of the procurement:

Energy efficiency is widely recognised as a cost-effective route to deliver emission reductions over the short-medium term. It also supports energy security objectives to support the development of technologies, which would enable industry to maintain production levels whilst reducing their energy demand.

The Industrial Decarbonisation and Energy Efficiency Roadmaps to 2050 identified that energy efficiency was a key route to enable industry to start to decarbonise, it also highlighted barriers to further implementation

The Industrial Energy Efficiency Accelerator (IEEA) programme goal is to increase the range of industrial energy efficient products and processes, and support the wider rollout across industry.

Please see the ITT for more information.

II.2.5)Award criteria

Price is not the only award criterion and all criteria are stated only in the procurement documents

II.2.6)Estimated value

Value excluding VAT: 1 500 000.00 GBP

II.2.7)Duration of the contract, framework agreement or dynamic purchasing system

Duration in months: 48
This contract is subject to renewal: no

II.2.10)Information about variants

Variants will be accepted: no

II.2.11)Information about options

Options: no
II.2.12)Information about electronic catalogues

II.2.13)Information about European Union funds

The procurement is related to a project and/or programme financed by European Union funds: no
II.2.14)Additional information

Section III: Legal, economic, financial and technical information

III.1)Conditions for participation
III.1.1)Suitability to pursue the professional activity, including requirements relating to enrolment on professional or trade registers
III.1.2)Economic and financial standing
III.1.3)Technical and professional ability
III.1.5)Information about reserved contracts
III.2)Conditions related to the contract
III.2.1)Information about a particular profession
III.2.2)Contract performance conditions:
III.2.3)Information about staff responsible for the performance of the contract

Section IV: Procedure

IV.1)Description

IV.1.1)Type of procedure

Open procedure
IV.1.3)Information about a framework agreement or a dynamic purchasing system
IV.1.4)Information about reduction of the number of solutions or tenders during negotiation or dialogue
IV.1.6)Information about electronic auction

IV.1.8)Information about the Government Procurement Agreement (GPA)

The procurement is covered by the Government Procurement Agreement: yes
IV.2)Administrative information
IV.2.1)Previous publication concerning this procedure

IV.2.2)Time limit for receipt of tenders or requests to participate

Date: 27/03/2017
Local time: 09:00
IV.2.3)Estimated date of dispatch of invitations to tender or to participate to selected candidates

IV.2.4)Languages in which tenders or requests to participate may be submitted:

English

IV.2.6)Minimum time frame during which the tenderer must maintain the tender

Duration in months: 3 (from the date stated for receipt of tender)

IV.2.7)Conditions for opening of tenders

Date: 27/03/2017
Local time: 11:00

Section VI: Complementary information

VI.1)Information about recurrence

This is a recurrent procurement: no
VI.2)Information about electronic workflows

VI.3)Additional information:

The contracting authority considers that this contract may be suitable for economic operators that are small or medium enterprises (SMEs). However, any selection of tenderers will be based solely on the criteria set out for the procurement.

For more information about this opportunity, please visit the Delta eSourcing portal at:

https://www.delta-esourcing.com/tenders/UK-UK-London:-Engineering-related-scientific-and-technical-services./Q793M8A3FZ

To respond to this opportunity, please click here:

https://www.delta-esourcing.com/respond/Q793M8A3FZ

GO Reference: GO-2017222-PRO-9658689.

VI.4)Procedures for review

VI.4.1)Review body

Department of Energy and Climate Change (DECC)
1 Victoria Street
London
SW1H 0ET
United Kingdom
Telephone: +44 3000685688
VI.4.2)Body responsible for mediation procedures
VI.4.3)Review procedure
VI.4.4)Service from which information about the review procedure may be obtained

VI.5)Date of dispatch of this notice:

22/02/2017

 

Related Posts

Demand Side Response Services for UK Public Sector

Internet of Things Smart Building Framework

Hydrogen Supply Chain Technical Evidence and Modelling Tool

Energy Efficiency Contractors Framework Scotland

Related posts:

  1. Scape Procure National Civil Engineering Framework – Scotland
  2. Welsh Government Energy Service Framework
  3. Utilities Switching Services for UK Public Sector
  4. Midlands Energy Performance Contract

Enjoyed this post? Share it!