Measured Term Contract for Metalwork and Small Engineering

Measured Term Contract for Metalwork and Small Engineering

The proposed start date is as soon as possible, 1 year contract with a 2 years extension dependant on performance.

United Kingdom-Belfast: Metalworking

2016/S 127-228751

Contract notice


Directive 2004/18/EC

Section I: Contracting authority

I.1)Name, addresses and contact point(s)

Belfast City Council
Adelaide Exchange, 24-26 Adelaide Street
For the attention of: Kelly Darren
BT2 8GD Belfast
United Kingdom
Telephone: +44 2890320202

Further information can be obtained from: The above mentioned contact point(s)

Specifications and additional documents (including documents for competitive dialogue and a dynamic purchasing system) can be obtained from:The above mentioned contact point(s)

Tenders or requests to participate must be sent to: The above mentioned contact point(s)

I.2)Type of the contracting authority

Regional or local authority

I.3)Main activity

General public services

I.4)Contract award on behalf of other contracting authorities

The contracting authority is purchasing on behalf of other contracting authorities: no

Section II: Object of the contract


II.1.1)Title attributed to the contract by the contracting authority:

Tender for MTC for Metalwork and Small Engineering.

II.1.2)Type of contract and location of works, place of delivery or of performance

Service category No 12: Architectural services; engineering services and integrated engineering services; urban planning and landscape engineering services; related scientific and technical consulting services; technical testing and analysis services
Main site or location of works, place of delivery or of performance: Belfast.

NUTS code UKN01

II.1.3)Information about a public contract, a framework agreement or a dynamic purchasing system (DPS)

The notice involves a public contract
II.1.4)Information on framework agreement

II.1.5)Short description of the contract or purchase(s)

Tender for MTC for metalwork and small engineering.
The proposed start date is as soon as possible, 1 year contract with a 2 years extension dependant on performance.
The minimum value of any order is 25 GBP and the maximum value is 10 000 GBP.

II.1.6)Common procurement vocabulary (CPV)

45262670, 71300000

II.1.7)Information about Government Procurement Agreement (GPA)

The contract is covered by the Government Procurement Agreement (GPA): yes


This contract is divided into lots: no

II.1.9)Information about variants

Variants will be accepted: no
II.2)Quantity or scope of the contract

II.2.1)Total quantity or scope:

Estimated value excluding VAT: 375 000 GBP

II.2.2)Information about options

Options: no

II.2.3)Information about renewals

This contract is subject to renewal: yes
In the case of renewable supplies or service contracts, estimated timeframe for subsequent contracts:
in months: 36 (from the award of the contract)
II.3)Duration of the contract or time limit for completion

Section III: Legal, economic, financial and technical information

III.1)Conditions relating to the contract

III.1.1)Deposits and guarantees required:

See tender documentation.

III.1.2)Main financing conditions and payment arrangements and/or reference to the relevant provisions governing them:

See tender documentation.

III.1.3)Legal form to be taken by the group of economic operators to whom the contract is to be awarded:

See tender documentation.
III.1.4)Other particular conditions
III.2)Conditions for participation

III.2.1)Personal situation of economic operators, including requirements relating to enrolment on professional or trade registers

Information and formalities necessary for evaluating if the requirements are met: See tender documentation.

III.2.2)Economic and financial ability

Information and formalities necessary for evaluating if the requirements are met: See tender documentation.
Minimum level(s) of standards possibly required: See tender documentation.

III.2.3)Technical capacity

Information and formalities necessary for evaluating if the requirements are met:
See tender documentation.
Minimum level(s) of standards possibly required:
See tender documentation.
III.2.4)Information about reserved contracts
III.3)Conditions specific to services contracts
III.3.1)Information about a particular profession
III.3.2)Staff responsible for the execution of the service

Section IV: Procedure

IV.1)Type of procedure

IV.1.1)Type of procedure

IV.1.2)Limitations on the number of operators who will be invited to tender or to participate
IV.1.3)Reduction of the number of operators during the negotiation or dialogue
IV.2)Award criteria

IV.2.1)Award criteria

Lowest price

IV.2.2)Information about electronic auction

An electronic auction will be used: no
IV.3)Administrative information

IV.3.1)File reference number attributed by the contracting authority:


IV.3.2)Previous publication(s) concerning the same contract


IV.3.3)Conditions for obtaining specifications and additional documents or descriptive document

Time limit for receipt of requests for documents or for accessing documents: 12.8.2016 – 12:00
Payable documents: no

IV.3.4)Time limit for receipt of tenders or requests to participate

12.8.2016 – 12:00
IV.3.5)Date of dispatch of invitations to tender or to participate to selected candidates

IV.3.6)Language(s) in which tenders or requests to participate may be drawn up

IV.3.7)Minimum time frame during which the tenderer must maintain the tender

IV.3.8)Conditions for opening of tenders

Persons authorised to be present at the opening of tenders: no

Section VI: Complementary information

VI.1)Information about recurrence

This is a recurrent procurement: no

VI.2)Information about European Union funds

The contract is related to a project and/or programme financed by European Union funds: no

VI.3)Additional information

Suppliers Instructions How to Express Interest in this Tender: 1. Register your company on the eSourcing portal (this is only required once): and click the link to register — Accept the terms and conditions and click ‘I agree’ — Enter your correct business and user details — Note the username you chose and click ‘Save’ when complete — You will shortly receive an email with your unique password (please keep this secure) 2. Express an Interest in the tender — Login to the portal with the username/password — Click the ‘PQQs / ITTs Open To All Suppliers’ link. (These are Pre-Qualification Questionnaires or Invitations to Tender open to any registered supplier) — Click on the relevant PQQ/ ITT to access the content. — Click the ‘Express Interest’ button at the top of the page. — This will move the PQQ /ITT into your ‘My PQQs/ My ITTs’ page. (This is a secure area reserved for your projects only) — You can now access any attachments by clicking ‘Buyer Attachments’ in the ‘PQQ/ ITT Details’ box. 3. Responding to the tender — Click ‘My Response’ under ‘PQQ/ ITT Details’, you can choose to ‘Create Response’ or to ‘Decline to Respond’ (please give a reason if declining) — You can now use the ‘Messages’ function to communicate with the buyer and seek any clarification — Note the deadline for completion, then follow the onscreen instructions to complete the PQQ/ ITT — There may be a mixture of online and offline actions for you to perform (there is detailed online help available). You must then submit your reply using the ‘Submit Response’ button at the top of the page. If you require any further assistance please consult the online help, or contact the eTendering help desk.

VI.4)Procedures for appeal
VI.4.1)Body responsible for appeal procedures

VI.4.2)Lodging of appeals

Precise information on deadline(s) for lodging appeals: This authority will incorporate a standstill period at the point information on the award of the contract is communicated to tenderers. That notification will provide full information on the award decision. The standstill period, which will be for a minimum of 10 calendar days, provides time for unsuccessful tenderers to challenge the award decision before the contract is entered into The Public Contracts Regulations 2015 (SI 2015 No 102) provide for aggrieved parties who have been harmed or are at risk of harm by a breach of the rules to take action in the High Court (England, Wales and Northern Ireland).
VI.4.3)Service from which information about the lodging of appeals may be obtained

VI.5)Date of dispatch of this notice:



Related Posts

Purchase of Hand Tools and Small Electrical Equipment Framework

Supply of Small Plant and Spares

Telehandler Request for Quote

Tender for Automation of Grab Cranes

Enjoyed this post? Share it!