Requirement for Mount Making Contractors

Requirement for Mount Making Contractors

NAM is therefore inviting tenders from Mount Making Contractors to carry out the design, creation and installation of the mounts required as part of the redevelopment.

United Kingdom-London: Exhibition equipment

2015/S 251-460087

Contract notice

Supplies

Directive 2004/18/EC

Section I: Contracting authority

I.1)Name, addresses and contact point(s)

National Army Museum
Royal Hospital Road, Chelsea
For the attention of: Genevieve Adkins
SW3 4HT London
UNITED KINGDOM
Telephone: +44 2078812491
E-mail: gadkins@nam.ac.uk

Internet address(es):

General address of the contracting authority: http://www.nam.ac.uk

Address of the buyer profile: http://www.mytenders.org/search/Search_AuthProfile.aspx?ID=AA30248

Electronic access to information: https://www.dropbox.com/sh/gy63jo49rdmpogi/AACQgK7xrOiN8WJue-4nqZSVa?dl=0

Electronic submission of tenders and requests to participate: www.focus-consultants.com

Further information can be obtained from: Focus Consultants
88 Kingsway
For the attention of: Joanna Watson
WC2B 6AA London
UNITED KINGDOM
Telephone: +44 2076816114
E-mail: joanna.watson@focus-consultants.com
Internet address: http://www.focus-consultants.com

Specifications and additional documents (including documents for competitive dialogue and a dynamic purchasing system) can be obtained from: Focus Consultants
UNITED KINGDOM
Internet address: https://www.dropbox.com/sh/gy63jo49rdmpogi/AACQgK7xrOiN8WJue-4nqZSVa?dl=0

Tenders or requests to participate must be sent to: Focus Consultants 2010 LLP
88 Kingsway
For the attention of: Joanna Watson
WC2B 6AA London
UNITED KINGDOM
Telephone: +44 2076816114
E-mail: joanna.watson@focus-consultants.com
Internet address: http://www.focus-consultants.com

I.2)Type of the contracting authority

Other: National Museum

I.3)Main activity

Recreation, culture and religion
Education

I.4)Contract award on behalf of other contracting authorities

The contracting authority is purchasing on behalf of other contracting authorities: no

Section II: Object of the contract

II.1)Description

II.1.1)Title attributed to the contract by the contracting authority:

National Army Museum — Building for the Future — Mount Making.

II.1.2)Type of contract and location of works, place of delivery or of performance

Supplies
Purchase
Main site or location of works, place of delivery or of performance: National Army Museum, Royal Hospital Road, Chelsea, London, SW3 4HT, United Kingdom.

NUTS code UKI11

II.1.3)Information about a public contract, a framework agreement or a dynamic purchasing system (DPS)

The notice involves a public contract
II.1.4)Information on framework agreement

II.1.5)Short description of the contract or purchase(s)

The National Army Museum (NAM) is undergoing a substantial redevelopment through the Building for the Future project. As part of this, five new galleries will be created plus an introductory area and various display opportunities throughout the building.
NAM is therefore inviting tenders from Mount Making Contractors to carry out the design, creation and installation of the mounts required as part of the redevelopment. We note that the mannequins and ‘big and heavy’ object mounts are being procured separately.
Please see the Tender Documents for more information.
The Mount Making Contractor must be able to demonstrate recent experience in design, production and installation of Mounts in Museum or similar environments. The Mount Making Contractor will need to be able to share the NAM and the Design Team’s vision which will transform the spaces into ideal locations to display a diverse range of NAM’s collections combining sensitivity to the building and the collections with an imaginative, sustainable, collaborative and transformative approach.
The Exhibition Designer for the project is Event Communications and the Project Manager and Quantity Surveyor is Focus Consultants.
The new National Army Museum is due to open towards the end of 2016 and therefore all Mounts must be completed and installed by Autumn 2016. There will need to be careful coordination with the exhibition fit out contractor, the Hub.

Note: To register your interest in this notice and obtain any additional information please visit the myTenders Web Site athttp://www.myTenders.org/Search/Search_Switch.aspx?ID=168152

II.1.6)Common procurement vocabulary (CPV)

39154000, 92521100, 92521000, 92500000, 79930000

II.1.7)Information about Government Procurement Agreement (GPA)

The contract is covered by the Government Procurement Agreement (GPA): yes

II.1.8)Lots

This contract is divided into lots: no

II.1.9)Information about variants

Variants will be accepted: yes
II.2)Quantity or scope of the contract

II.2.1)Total quantity or scope:

As detailed in the Invitation to Tender.

II.2.2)Information about options

Options: no

II.2.3)Information about renewals

This contract is subject to renewal: no

II.3)Duration of the contract or time limit for completion

Starting 22.2.2016. Completion 18.11.2016

Section III: Legal, economic, financial and technical information

III.1)Conditions relating to the contract

III.1.1)Deposits and guarantees required:

As detailed in the Invitation to Tender Documentation.

III.1.2)Main financing conditions and payment arrangements and/or reference to the relevant provisions governing them:

As detailed in the tender documents.

III.1.3)Legal form to be taken by the group of economic operators to whom the contract is to be awarded:

As detailed in the tender documents.

III.1.4)Other particular conditions

The performance of the contract is subject to particular conditions: yes
Description of particular conditions: As detailed in the tender documents.
III.2)Conditions for participation

III.2.1)Personal situation of economic operators, including requirements relating to enrolment on professional or trade registers

Information and formalities necessary for evaluating if the requirements are met: (1) All candidates will be required to produce a certificate or declaration demonstrating that they are not bankrupt or the subject of an administration order, are not being wound-up, have not granted a trust deed, are not the subject of a petition presented for sequestration of their estate, have not had a receiver, manager or administrator appointed and are not otherwise apparently insolvent.
(2) All candidates will be required to produce a certificate or declaration demonstrating that the candidate, their directors, or any other person who has powers of representation, decision or control of the candidate has not been convicted of conspiracy, corruption, bribery, or money laundering. Failure to provide such a declaration will result in the candidate being declared ineligible and they will not be selected to participate in this procurement process.
(3) All candidates will be required to produce a certificate or declaration demonstrating that they have not been convicted of a criminal offence relating to the conduct of their business or profession.
(4) All candidates will be required to produce a certificate or declaration demonstrating that they have not committed an act of grave misconduct in the course of their business or profession.
(5) All candidates must comply with the requirements of the State in which they are established, regarding registration on the professional or trade register.
(6) Any candidate found to be guilty of serious misrepresentation in providing any information required, may be declared ineligible and not selected to continue with this procurement process.
(7) All candidates will have to demonstrate that they are licensed, or a member of the relevant organisation, in the State where they are established, when the law of that State prohibits the provision of the services, described in this notice, by a person who is not so licensed or who is not a member of the relevant organisation.
(8) All candidates will be required to produce a certificate or declaration demonstrating that they have fulfilled obligations relating to the payment of social security contributions under the law of any part of the United Kingdom or of the relevant State in which the candidate is established.
(9) All candidates will be required to produce a certificate or declaration demonstrating that they have fulfilled obligations relating to the payment of taxes under the law of any part of the United Kingdom or of the relevant State in which the economic operator is established.
As detailed in the tender documents.

III.2.2)Economic and financial ability

Information and formalities necessary for evaluating if the requirements are met: (1) All candidates will be required to provide a reference from their bank.
(2) All candidates will be required to provide evidence of relevant professional risk indemnity insurance.
(3) All candidates will be required to provide a statement, covering the 3 previous financial years including the overall turnover of the candidate and the turnover in respect of the activities which are of a similar type to the subject matter of this notice.
(4) All candidates will be required to provide statements of accounts or extracts from those accounts relating to their business.
As detailed in the tender documents.
Minimum level(s) of standards possibly required: As detailed in the tender documents.

III.2.3)Technical capacity

Information and formalities necessary for evaluating if the requirements are met:
(1) A statement of the candidate’s average annual number of staff and managerial staff over the previous 3 years.
(2) Details of the educational and professional qualifications of their managerial staff; and those of the person(s) who would be responsible for providing the services or carrying out the work or works under the contract;
(3) Samples, descriptions and/or photographs, the authenticity of which must be certified if the contracting authority so requests.
(4) A check may be carried out by the contracting authority or by a competent official body of the State in which the candidate is established, to verify the technical capacity of the candidate; and if relevant, on the candidates study and research facilities and quality control measures.
(5) A statement of the candidate’s technical facilities; measures for ensuring quality; and their study and research facilities.
(6) An indication of the proportion of the contract which the services provider intends possibly to subcontract.
(7) A statement of the technicians or technical services available to the candidate to carry out the work under the contract; or be involved in the production of goods or the provision of services under the contract; particularly those responsible for quality control, whether or not they are independent of the candidate.
(8) A statement of the tools, plant or technical equipment available to the service provider or contractor for carrying out the contract.
(9) A list of works carried out over the past 5 years, detailing the value of the consideration received; when and where the work or works were carried out; and whether they were carried out according to the rules of the trade or profession and properly completed.
As detailed in the tender documents.
Minimum level(s) of standards possibly required:
As detailed in the tender documents.
III.2.4)Information about reserved contracts
III.3)Conditions specific to services contracts
III.3.1)Information about a particular profession

III.3.2)Staff responsible for the execution of the service

Legal persons should indicate the names and professional qualifications of the staff responsible for the execution of the service: yes

Section IV: Procedure

IV.1)Type of procedure

IV.1.1)Type of procedure

Open
IV.1.2)Limitations on the number of operators who will be invited to tender or to participate
IV.1.3)Reduction of the number of operators during the negotiation or dialogue
IV.2)Award criteria

IV.2.1)Award criteria

The most economically advantageous tender in terms of the criteria stated in the specifications, in the invitation to tender or to negotiate or in the descriptive document

IV.2.2)Information about electronic auction

An electronic auction will be used: no
IV.3)Administrative information
IV.3.1)File reference number attributed by the contracting authority:
IV.3.2)Previous publication(s) concerning the same contract
IV.3.3)Conditions for obtaining specifications and additional documents or descriptive document

IV.3.4)Time limit for receipt of tenders or requests to participate

28.1.2016 – 13:00
IV.3.5)Date of dispatch of invitations to tender or to participate to selected candidates

IV.3.6)Language(s) in which tenders or requests to participate may be drawn up

English.

IV.3.7)Minimum time frame during which the tenderer must maintain the tender

Duration in months: 3 (from the date stated for receipt of tender)

IV.3.8)Conditions for opening of tenders

Date: 28.1.2016 – 14:00

Place:

Focus Consultants, 88 Kingsway, London, WC2B 6AA.

Section VI: Complementary information

VI.1)Information about recurrence
VI.2)Information about European Union funds

VI.3)Additional information

N/a (MT Ref: 168152).
VI.4)Procedures for appeal
VI.4.1)Body responsible for appeal procedures
VI.4.2)Lodging of appeals
VI.4.3)Service from which information about the lodging of appeals may be obtained

VI.5)Date of dispatch of this notice:

24.12.2015

Enjoyed this post? Share it!

 

Leave a comment

Your email address will not be published. Required fields are marked *