Supply and Installation of Automated Storage System

Supply and Installation of Automated Storage System

The objective is the supply, installation and commissioning of an automated storage system for use within the AMRC Factory 2050 building.

United Kingdom-Sheffield: Carousel storage and retrieval machines

2014/S 162-290209

Contract notice

Supplies

Directive 2004/18/EC

Section I: Contracting authority

I.1)Name, addresses and contact point(s)

University of Sheffield
Floor 5, Arts Tower, Western Bank
Contact point(s): https://www.in-tendhost.co.uk/sheffield
For the attention of: Anna Paxton
S10 2TN Sheffield
UNITED KINGDOM
Telephone: +44 1142229570
E-mail: a.paxton@sheffield.ac.uk

Internet address(es):

General address of the contracting authority: www.sheffield.ac.uk

Address of the buyer profile: https://www.in-tendhost.co.uk/sheffield

Further information can be obtained from: The above mentioned contact point(s)

Specifications and additional documents (including documents for competitive dialogue and a dynamic purchasing system) can be obtained from: The above mentioned contact point(s)

Tenders or requests to participate must be sent to: The above mentioned contact point(s)

I.2)Type of the contracting authority

Body governed by public law

I.3)Main activity

Education

I.4)Contract award on behalf of other contracting authorities

The contracting authority is purchasing on behalf of other contracting authorities: no

Section II: Object of the contract

II.1)Description

II.1.1)Title attributed to the contract by the contracting authority:

218/AP/F/14 Intelligent Storage.

II.1.2)Type of contract and location of works, place of delivery or of performance

Supplies
Purchase
Main site or location of works, place of delivery or of performance: Advanced Manufacturing Research Centre, Catcliffe, Rotherham.

NUTS code UKE32

II.1.3)Information about a public contract, a framework agreement or a dynamic purchasing system (DPS)

The notice involves a public contract
II.1.4)Information on framework agreement

II.1.5)Short description of the contract or purchase(s)

218/AP/F/14 Intelligent Storage
The University of Sheffield wishes to invite tenders on behalf of the Advanced Manufacturing Research Centre”s Factory 2050 initiative at Catcliffe in Rotherham.
Scope of Requirement:
The objective is the supply, installation and commissioning of an automated storage system for use within the AMRC Factory 2050 building.
This machine will predominately be used for the storing of items and equipment on pallets that would otherwise be on show and visible as a result of the building being constructed of glass.
Tender Process and Documentation:

This is an open e.u. exercise. The ITT can be downloaded by registering and expressing your interest on the University’s e-tendering systemhttps://www.in-tendhost.co.uk/Sheffield.

If you have any questions or comments in relation to this tender they must be submitted via the In-tend System, this can be accessed athttps://www.in-tendhost.co.uk/Sheffield

Completed tenders must be returned through the same e-tendering system.
Closing date for receipt of tenders: 6.10.2014 at 12:00 (UK time).

II.1.6)Common procurement vocabulary (CPV)

42418400

II.1.7)Information about Government Procurement Agreement (GPA)

The contract is covered by the Government Procurement Agreement (GPA): yes

II.1.8)Lots

This contract is divided into lots: no

II.1.9)Information about variants

Variants will be accepted: no
II.2)Quantity or scope of the contract

II.2.1)Total quantity or scope:

Supply, installation and commissioning as per specification.
II.2.2)Information about options
II.2.3)Information about renewals
II.3)Duration of the contract or time limit for completion

Section III: Legal, economic, financial and technical information

III.1)Conditions relating to the contract

III.1.1)Deposits and guarantees required:

As per tender document.

III.1.2)Main financing conditions and payment arrangements and/or reference to the relevant provisions governing them:

As per tender document.

III.1.3)Legal form to be taken by the group of economic operators to whom the contract is to be awarded:

Joint and several liability.
III.1.4)Other particular conditions
III.2)Conditions for participation

III.2.1)Personal situation of economic operators, including requirements relating to enrolment on professional or trade registers

Information and formalities necessary for evaluating if the requirements are met: As per tender document.

III.2.2)Economic and financial ability

Information and formalities necessary for evaluating if the requirements are met: As per tender document.
Minimum level(s) of standards possibly required: As per tender document.

III.2.3)Technical capacity

Information and formalities necessary for evaluating if the requirements are met:
As per tender document.
Minimum level(s) of standards possibly required:
As per tender document.
III.2.4)Information about reserved contracts
III.3)Conditions specific to services contracts
III.3.1)Information about a particular profession
III.3.2)Staff responsible for the execution of the service

Section IV: Procedure

IV.1)Type of procedure

IV.1.1)Type of procedure

Open
IV.1.2)Limitations on the number of operators who will be invited to tender or to participate
IV.1.3)Reduction of the number of operators during the negotiation or dialogue
IV.2)Award criteria

IV.2.1)Award criteria

The most economically advantageous tender in terms of the criteria stated in the specifications, in the invitation to tender or to negotiate or in the descriptive document

IV.2.2)Information about electronic auction

An electronic auction will be used: no
IV.3)Administrative information

IV.3.1)File reference number attributed by the contracting authority:

218/AP/F14

IV.3.2)Previous publication(s) concerning the same contract

no

IV.3.3)Conditions for obtaining specifications and additional documents or descriptive document

Time limit for receipt of requests for documents or for accessing documents: 3.10.2014 – 12:00
Payable documents: no

IV.3.4)Time limit for receipt of tenders or requests to participate

6.10.2014 – 12:00
IV.3.5)Date of dispatch of invitations to tender or to participate to selected candidates

IV.3.6)Language(s) in which tenders or requests to participate may be drawn up

English.

IV.3.7)Minimum time frame during which the tenderer must maintain the tender

Duration in months: 3 (from the date stated for receipt of tender)

IV.3.8)Conditions for opening of tenders

Date: 6.10.2014 – 13:00
Persons authorised to be present at the opening of tenders: yes
Additional information about authorised persons and opening procedure: Authorised officers of the University.

Section VI: Complementary information

VI.1)Information about recurrence

This is a recurrent procurement: no

VI.2)Information about European Union funds

The contract is related to a project and/or programme financed by European Union funds: yes
Reference to project(s) and/or programme(s): ERDF Project.
VI.3)Additional information
VI.4)Procedures for appeal
VI.4.1)Body responsible for appeal procedures

VI.4.2)Lodging of appeals

Precise information on deadline(s) for lodging appeals: The contracting authority will incorporate a minimum ten-day standstill period at the point information on the award of Contract is communicated to tenderers. This period allows unsuccessful tenderers to seek a further debriefing before the Contract is entered into. If an appeal regarding the award of Contract cannot be resolved, the Public Contract Regulations 2006 (as amended) provides for aggrieved parties to take action in the High Court (England, Wales and Northern Ireland). Any such action should be brought promptly (generally within 30 days).
VI.4.3)Service from which information about the lodging of appeals may be obtained

VI.5)Date of dispatch of this notice:

23.8.2014

Enjoyed this post? Share it!