Supply of Domestic Appliances

Supply of Domestic Appliances

Provision of Electrical White Goods Domestic Appliances and Accessories.

UK-Liverpool: domestic appliances

2012/S 149-248971

Contract notice

Supplies

Directive 2004/18/EC

Section I: Contracting authority

I.1)Name, addresses and contact point(s)

Liverpool City Council
Finance & Resources (Procurement), 4th floor Venture Place, Sir Thomas Street
Contact point(s): Ms Lyndsay Miles
For the attention of: Ms Lyndsay Miles
L1 6BW Liverpool
UNITED KINGDOM
E-mail: lyndsay.miles@liverpool.gov.uk

I.2)Type of the contracting authority

Regional or local authority
I.3)Main activity

General public services
I.4)Contract award on behalf of other contracting authorities

The contracting authority is purchasing on behalf of other contracting authorities: yes

Section II: Object of the contract

II.1)Description
II.1.1)Title attributed to the contract by the contracting authority:

Provision of Electrical White Goods Domestic Appliances and Accessories.
II.1.2)Type of contract and location of works, place of delivery or of performance

Supplies
Purchase
Main site or location of works, place of delivery or of performance: Merseyside.
NUTS code UKD5

II.1.3)Information about a public contract, a framework agreement or a dynamic purchasing system (DPS)

The notice involves a public contract
II.1.4)Information on framework agreement
II.1.5)Short description of the contract or purchase(s)

Liverpool City Council wishes to arrange a collaborative contract on behalf of: Liverpool City Council, Wirral Borough Council, Sefton Metropolitan Borough Council, Halton Borough Council, Knowsley Metropolitan Borough Council and St Helens Metropolitan Borough Council for the provision electrical white goods domestic appliances and accessories.
II.1.6)Common procurement vocabulary (CPV)

39700000, 39220000, 39721100, 39720000

II.1.7)Information about Government Procurement Agreement (GPA)

The contract is covered by the Government Procurement Agreement (GPA): yes
II.1.8)Lots
II.1.9)Information about variants

Variants will be accepted: no
II.2)Quantity or scope of the contract
II.2.1)Total quantity or scope:

Estimated value excluding VAT: 486 000 GBP
II.2.2)Information about options

Options: no
II.2.3)Information about renewals
II.3)Duration of the contract or time limit for completion

Starting 1.12.2012. Completion 30.11.2015

Section III: Legal, economic, financial and technical information

III.1)Conditions relating to the contract
III.1.1)Deposits and guarantees required:

As per ITT Document.
III.1.2)Main financing conditions and payment arrangements and/or reference to the relevant provisions governing them:

As per ITT Documenet.
III.1.3)Legal form to be taken by the group of economic operators to whom the contract is to be awarded:

Joint and Several Liability.
III.1.4)Other particular conditions
III.2)Conditions for participation
III.2.1)Personal situation of economic operators, including requirements relating to enrolment on professional or trade registers

Information and formalities necessary for evaluating if the requirements are met: Any supplier may be disqualified who:
(a) is bankrupt or is being wound up, where his affairs are being administered by the court, where he has entered into an arrangement with creditors, where he has suspended business activities or is in any analogous situation arising from a similar procedure under national laws and regulations;
(b) is the subject of proceedings for a declaration of bankruptcy, for an order compulsory winding up the administration by the court or of an arrangement with creditors or of any other similar proceedings under national laws and regulations;
(c) has been convicted by a judgment which has the force of res judicata in accordance with the legal provisions of the country of any offence concerning his professional conduct;
(d) has been guilty of grave professional misconduct proven by any means which the contract authorities can demonstrate;
(e) has not fulfilled obligations relating to the payment of social security contributions in accordance with the legal provisions of the country in which he is established or with those of the country of the contracting authority;
(f) has not fulfilled obligations relating to the payment of taxes in accordance with the legal provisions of the country in which he is established or with those of the country of the contracting authority;
(g) is guilty of serious misrepresentation in supplying the information required under this Section or has not supplied such information;
(h) has been the subject of a conviction for participation in a criminal organization, as defined in Article 2(1) of Council Joint Action 98/733/JHA;
(i) has been the subject of a conviction for corruption, as defined in Article 3 of the Council Act of 26.5.1972 and Article 3(1) of Council Joint Action 98/742/JHA3 respectively;
(j) has been the subject of a conviction for fraud within the meaning of Article 1 of the Convention relating to the protection of the financial interests of the European Communities;
(k) has been the subject of a conviction for money laundering, as defined in Article 1 of Council Directive 91/308/EEC of 10.6.1991 on prevention of the use of the financial system for the purpose of money laundering.
Information and formalities necessary for evaluating if requirements are met:
As per ITT Document.
III.2.2)Economic and financial ability

Information and formalities necessary for evaluating if the requirements are met: (a) appropriate statements from banks or, where appropriate, evidence of relevant professional risk indemnity insurance;
(b) the presentation of balance-sheets or extracts from the balance-sheets, where publication of the balance-sheet is required under the law of the country in which the economic operator is established;
(c) a statement of the undertaking’s overall turnover and, where appropriate, of turnover in the area covered by the contract for a maximum of the last three financial years available, depending on the date on which the undertaking was set up or the economic operator started trading, as far as the information of these turnovers is available.
Information and formalities necessary for evaluating if requirements are met:
As per ITT Document.
Minimum level(s) of standards possibly required: As per ITT Document.
III.2.3)Technical capacity

Information and formalities necessary for evaluating if the requirements are met:
(a) a list of the works carried out over the past five years, accompanied by certificates of satisfactory execution for the most important works. These certificates shall indicate the value, date and site of the works and shall specify whether they were carried out according to the rules of the trade and properly completed. Where appropriate, the competent authority shall submit these certificates to the contracting authority direct;
(b) a list of the principal deliveries effected or the main services provided in the past three years, with the sums, dates and recipients, whether public or private, involved. Evidence of delivery and services provided shall be given: – where the recipient was a contracting authority, in the form of certificates issues or countersigned by the competent authority, – where the recipient was a private purchaser, by the purchaser’s certification or, failing this, simply by a declaration by the economic operator;
(c) an indication of the technicians or technical bodies involved, whether or not belonging directly to the economic operator’s undertaking, especially those responsible for quality control and, in the case of public works contracts, those upon whom the contractor can call in order to carry out the work;
(d) a description of the technical facilities and measures used by the supplier or service provider for ensuring quality and the undertaking’s study and research facilities;
(e) where the products or services to be supplied are complex or, exceptionally, are required for a special purpose, a check carried out by the contracting authorities or on their behalf by a competent official body of the country in which the supplier or service provider is established, subject to that body’s agreement, on the production capabilities of the supplier or the technical capacity of the service provider and, if necessary, on the means of study and research which are available to it and the quality control measures it will operate;
(f) the educational and professional qualifications of the service provider or contractor and/or those of the undertaking’s managerial staff and, in particular, those of the person or persons responsible for providing the services or managing the work;
(g) for public works contracts and public services contracts, and only in appropriate cases, and indication of the environmental management measures that the economic operator will be able to apply when performing the contract;
(h) a statement of the average annual manpower of the service provider or contractor and the number of managerial staff for the last three years;
(i) a statement of the tools, plant or technical equipment available to the service provider or contractor for carrying out the contracts;
(j) an indication of the proportion of the contract which the services provider intends possibly to subcontract;
(k) with regard to the products to be supplied:
(i) samples, descriptions and/or photographs, the authenticity of which must be certified if the contracting authority so request;
(ii) certificates drawn up by official quality control institutes or agencies of recognized competence attesting the conformity of products clearly identified by references to specifications or standards.
Information and formalities necessary for evaluating if requirements are met:
As per ITT Document.
Minimum level(s) of standards possibly required:
As per ITT Document.
III.2.4)Information about reserved contracts
III.3)Conditions specific to services contracts
III.3.1)Information about a particular profession

Execution of the service is reserved to a particular profession: no
III.3.2)Staff responsible for the execution of the service

Legal persons should indicate the names and professional qualifications of the staff responsible for the execution of the service: no

Section IV: Procedure

IV.1)Type of procedure
IV.1.1)Type of procedure

Open
IV.1.2)Limitations on the number of operators who will be invited to tender or to participate
IV.1.3)Reduction of the number of operators during the negotiation or dialogue
IV.2)Award criteria
IV.2.1)Award criteria

The most economically advantageous tender in terms of the criteria stated in the specifications, in the invitation to tender or to negotiate or in the descriptive document
IV.2.2)Information about electronic auction

An electronic auction will be used: no
IV.3)Administrative information
IV.3.1)File reference number attributed by the contracting authority:

NWCE- 8WRE5P
IV.3.2)Previous publication(s) concerning the same contract

no
IV.3.3)Conditions for obtaining specifications and additional documents or descriptive document

Time limit for receipt of requests for documents or for accessing documents: 12.9.2012 – 16:00
Payable documents: no
IV.3.4)Time limit for receipt of tenders or requests to participate

17.9.2012 – 16:00
IV.3.5)Date of dispatch of invitations to tender or to participate to selected candidates
IV.3.6)Language(s) in which tenders or requests to participate may be drawn up

English.
IV.3.7)Minimum time frame during which the tenderer must maintain the tender

Duration in months: 3 (from the date stated for receipt of tender)
IV.3.8)Conditions for opening tenders

Date: 18.9.2012 – 10:00

Section VI: Complementary information

VI.1)Information about recurrence

This is a recurrent procurement: yes
Estimated timing for further notices to be published: 3 Years
VI.2)Information about European Union funds

The contract is related to a project and/or programme financed by European Union funds: no
VI.3)Additional information

ITT documents can be obtained via the chest website.
Your company will need to register on The Chest (Due North).
The documents will only be available on the Chest. Once you have registeredyou will need to go to the “my opportunities section” on the home page of the CHEST and follow the instructions as a supplier to enable you to return your submission.
To register your organisation on The Chest click on the following link www.thechest.nwce.gov.uk, go to suppliers area and click on “register free”.

VI.4)Procedures for appeal
VI.4.1)Body responsible for appeal procedures
VI.4.2)Lodging of appeals

Precise information on deadline(s) for lodging appeals: The appeals process will follow the EU Remedies Directives.
VI.4.3)Service from which information about the lodging of appeals may be obtained

VI.5)Date of dispatch of this notice:1.8.2012