Supply Surf Zone Safety Craft to Ministry of Defence

Supply Surf Zone Safety Craft to Ministry of Defence

The Authority has a requirement for a total of 5 Personal Water Craft complete with road trailers and rescue sleds to provide surf zone safety and Search and Rescue capability during training exercises.

United Kingdom-Bristol: Small craft

2015/S 010-012393

Contract notice

Supplies

Directive 2004/18/EC

Section I: Contracting authority

I.1)Name, addresses and contact point(s)

Ministry of Defence, Ships
Commercially Supported Shipping, Neighbourhood 3, Ash 2A #3203, MOD Abbey Wood South
For the attention of: Dr. Jamie Johnson
BS34 8JH Bristol
UNITED KINGDOM
Telephone: +44 3067987134
E-mail: desshipscomrcl-css-3a@mod.uk

Further information can be obtained from: The above mentioned contact point(s)

Specifications and additional documents (including documents for competitive dialogue and a dynamic purchasing system) can be obtained from: The above mentioned contact point(s)

Tenders or requests to participate must be sent to: The above mentioned contact point(s)

I.2)Type of the contracting authority

Ministry or any other national or federal authority, including their regional or local sub-divisions

I.3)Main activity

Defence

I.4)Contract award on behalf of other contracting authorities

The contracting authority is purchasing on behalf of other contracting authorities: no

Section II: Object of the contract

II.1)Description

II.1.1)Title attributed to the contract by the contracting authority:

Surf Zone Safety Craft.

II.1.2)Type of contract and location of works, place of delivery or of performance

Supplies
Purchase

NUTS code UKK1

II.1.3)Information about a public contract, a framework agreement or a dynamic purchasing system (DPS)

The notice involves a public contract
II.1.4)Information on framework agreement

II.1.5)Short description of the contract or purchase(s)

Small craft.

II.1.6)Common procurement vocabulary (CPV)

34522300

II.1.7)Information about Government Procurement Agreement (GPA)

The contract is covered by the Government Procurement Agreement (GPA): yes

II.1.8)Lots

This contract is divided into lots: no

II.1.9)Information about variants

Variants will be accepted: no
II.2)Quantity or scope of the contract

II.2.1)Total quantity or scope:

The Authority has a requirement for a total of 5 Personal Water Craft complete with road trailers and rescue sleds to provide surf zone safety and Search and Rescue capability during training exercises. Each Personal Water Craft must be capable of operating with three people on board and of simultaneously towing a rescue sled with a 150 kg payload. The craft must have sufficient power to accelerate and manoeuvre rapidly in the surf zone whilst maintaining an unladen weight of no more than 450 kg. The Water Craft should be no greater than 3.5 m in length and no greater than 1.8 m wide.
Estimated value excluding VAT: 180 000 GBP

II.2.2)Information about options

Options: no
II.2.3)Information about renewals

II.3)Duration of the contract or time limit for completion

Duration in months: 1 (from the award of the contract)

Section III: Legal, economic, financial and technical information

III.1)Conditions relating to the contract
III.1.1)Deposits and guarantees required:
III.1.2)Main financing conditions and payment arrangements and/or reference to the relevant provisions governing them:

III.1.3)Legal form to be taken by the group of economic operators to whom the contract is to be awarded:

If a group of economic operators submits a bid, the group must nominate a lead organisation to deal with the Authority. The Authority shall require the group to form a legal entity before entering into the contract.

III.1.4)Other particular conditions

The performance of the contract is subject to particular conditions: no
III.2)Conditions for participation

III.2.1)Personal situation of economic operators, including requirements relating to enrolment on professional or trade registers

Information and formalities necessary for evaluating if the requirements are met: The Authority will apply all the offences listed in Article 45(1) of Directive 2004/18/EC (implemented as Regulation 23(1) of the Public Contract Regulations (PCR) 2006 in the UK) and all of the professional misconducts listed at Article 45(2) of Directive 2004/18/EC (see also Regulation 23(2) in the PCR 2006) to the decision of whether a Candidate is eligible to be invited to tender.

A full list of the Regulation 23(1) and 23(2) criteria are at http://www.contracts.mod.uk/delta/project/reasonsForExclusion.html#dspr

Candidates will be required to sign a declaration confirming whether they do or do not have any of the listed criteria as part of the pre-qualification process. For candidates who are registered overseas, you will need to declare if you have any offences/misconduct under your own countries laws, where these laws are equivalent to the Regulation 23 lists.
Candidates who have been convicted of any of the offences under Article 45(1) are ineligible and will not be selected to bid, unless there are overriding requirements in the general interest for doing so.
Candidates who are guilty of any of the offences, circumstances or misconduct under Article 45(2) may be excluded from being selected to bid at the discretion of the Authority.
Contractors will be required to submit a Statement of Good standing in relation to this requirement.

III.2.2)Economic and financial ability

Information and formalities necessary for evaluating if the requirements are met: (b) The presentation of balance-sheets or extracts from the balance-sheets, where publication of the balance-sheet is required under the law of the country in which the economic operator is established.
(c) A statement of the undertaking’s overall turnover and, where appropriate, of turnover in the area covered by the contract for a maximum of the last 3 financial years available, depending on the date on which the undertaking was set up or the economic operator started trading, as far as the information on these turnovers is available.
Minimum level(s) of standards possibly required: The estimated contract value is 180 000 GBP. If the estimated contract value is greater than 40 % of the supplier’s turnover, the Authority reserves the right to exclude the supplier from being selected to tender except where the supplier provides, to the satisfaction of the Authority, evidence showing it has sufficient economic and financial capability, e.g. such evidence may include:
(1) Any additional information proving it has sufficient economic and financial resources to deliver the requirement; and
(2) State whether the supplier is willing to provide the Authority with an indemnity, guarantee or bank bond.
A financial assessment will be undertaken on the supplier’s financial status. An overall pass/fail judgement will be made after considering areas such as turnover, profit, net assets, liquidity, gearing and capacity. This assessment will include the Parent company where applicable. An independent financial assessment obtained from a reputable credit rating organisation may be utilised as part of this process.

III.2.3)Technical capacity

Information and formalities necessary for evaluating if the requirements are met:
(j) An indication of the proportion of the contract which the services provider intends possibly to subcontract.
(k) With regard to the products to be supplied:
(i) samples, descriptions and/or photographs, the authenticity of which must be certified if the contracting authority so requests;
(ii) certificates drawn up by official quality control institutes or agencies of recognised competence attesting the conformity of products clearly identified by references to specifications or standards.
The evidence required to assess and evaluate technical capability will be sought through a formal pre-qualification questionnaire, which should be completed in accordance with the guidance in section IV.1.2).
III.2.4)Information about reserved contracts
III.3)Conditions specific to services contracts
III.3.1)Information about a particular profession
III.3.2)Staff responsible for the execution of the service

Section IV: Procedure

IV.1)Type of procedure

IV.1.1)Type of procedure

Restricted

IV.1.2)Limitations on the number of operators who will be invited to tender or to participate

Envisaged minimum number 5: and maximum number 6
Objective criteria for choosing the limited number of candidates: Suppliers must read through this set of instructions and follow the process to respond to this opportunity.

The information and/or documents for this opportunity are available on http://www.contracts.mod.uk/delta You must register on this site to respond, if you are already registered you will not need to register again, simply use your existing username and password. Please note there is a password reminder link on the homepage.

Suppliers must log in, go to your Response Manager and add the following Access Code: Y4PFHM269G. Please ensure you follow any instruction provided to you here.
The deadline for submitting your response(s) is 13.2.2015 15:00. Please ensure that you allow yourself plenty of time when responding to this invite prior to the closing date and time, especially if you have been asked to upload documents.

If you experience any difficulties please refer to the online Frequently Asked Questions (FAQ’s) or the User Guides or contact the MOD DCO Help desk by e-mailing — support@contracts.mod.uk or call +44 800282324.

Full details of the method for choosing the tenderers will be set out in the Help Text Box for the Dynamic PQQ.

IV.1.3)Reduction of the number of operators during the negotiation or dialogue
IV.2)Award criteria

IV.2.1)Award criteria

The most economically advantageous tender in terms of the criteria stated in the specifications, in the invitation to tender or to negotiate or in the descriptive document

IV.2.2)Information about electronic auction

An electronic auction will be used: no
IV.3)Administrative information

IV.3.1)File reference number attributed by the contracting authority:

CSS/0081

IV.3.2)Previous publication(s) concerning the same contract

no

IV.3.3)Conditions for obtaining specifications and additional documents or descriptive document

Payable documents: no

IV.3.4)Time limit for receipt of tenders or requests to participate

13.2.2015
IV.3.5)Date of dispatch of invitations to tender or to participate to selected candidates

IV.3.6)Language(s) in which tenders or requests to participate may be drawn up

English.
IV.3.7)Minimum time frame during which the tenderer must maintain the tender
IV.3.8)Conditions for opening of tenders

Section VI: Complementary information

VI.1)Information about recurrence

This is a recurrent procurement: no

VI.2)Information about European Union funds

The contract is related to a project and/or programme financed by European Union funds: no

VI.3)Additional information

The contracting authority considers that this contract may be suitable for economic operators that are small or medium enterprises (SMEs). However, any selection of tenderers will be based solely on the criteria set out for the procurement, and the contract will be awarded on the basis of the most economically advantageous tender. Suppliers interested in working with the Ministry of Defence should register on the MOD Supplier Information Database (SID) Register, available at www.contracts.mod.uk The MOD SID is a database of active and potential suppliers available to all MOD and UK Defence procurement personnel, and is the main supplier database of MOD Procurement organisations. Please note: the registration and publication of a company profile on the MOD SID does not mean or imply that the supplier has in any way been vetted or approved by the MOD. Suppliers wishing to compete for advertised MOD contracts must respond to any specific call for competition by submitting a separate expression of interest in accordance with the instructions of the purchasing organisation.

From 2.4.2014 the Government is introducing its new Government Security Classifications Policy (GSC) to replace the current Government Protective Marking Scheme. A key aspect of this is the reduction in the number of security classifications used. All suppliers to the Department are encouraged to make themselves aware of the changes as it may impact on this Requirement. The link below to the www.Gov.uk website provides information on the new GSC.

https://www.gov.uk/government/publications/government-security-classifications

The Authority reserves the right to amend any condition related to security of information to reflect any changes in national law or government policy. If any contract documents are accompanied by instructions on safeguarding classified information (e.g. a Security Aspects Letter), the Authority reserves the right to amend the terms of these instructions to reflect any changes in national law or government policy, whether in respect of the applicable protective marking scheme, specific protective markings given, the aspects to which any protective marking applies, or otherwise.

Advertising Regime OJEU: This contract opportunity is published in the Official Journal of the European Union (OJEU), the MoD Defence Contracts Bulletin and www.contracts.mod.uk

Suppliers must read through this set of instructions and follow the process to respond to this opportunity.

The information and/or documents for this opportunity are available on http://www.contracts.mod.uk

You must register on this site to respond, if you are already registered you will not need to register again, simply use your existing username and password. Please note there is a password reminder link on the homepage.
Suppliers must log in, go to your Response Manager and add the following Access Code: Y4PFHM269G.
Please ensure you follow any instruction provided to you here.
The deadline for submitting your response(s) is detailed within this contract notice, you will also have visibility of the deadline date, once you have added the Access code via DCO as the opening and closing date is visible within the opportunity.
Please ensure that you allow yourself plenty of time when responding to this opportunity prior to the closing date and time, especially if you have been asked to upload documents.

If you experience any difficulties please refer to the online Frequently Asked Questions (FAQ’s) or the User Guides or contact the MOD DCO Help desk by e-mailing support@contracts.mod.uk or Telephone +44 800282324.

GO Reference: GO-2015112-DCB-6282918.

VI.4)Procedures for appeal
VI.4.1)Body responsible for appeal procedures
VI.4.2)Lodging of appeals
VI.4.3)Service from which information about the lodging of appeals may be obtained

VI.5)Date of dispatch of this notice:

12.1.2015

Enjoyed this post? Share it!