Tender for Architect Led Design Team Belfast

Tender for Architect Led Design Team Belfast

Architect Led Design Team services for the construction of social housing units at Bloomfield Road Bangor.

United Kingdom-Belfast: Architectural design services

2016/S 086-152558

Contract notice

Services

Directive 2004/18/EC

Section I: Contracting authority

I.1)Name, addresses and contact point(s)

Clanmil Developments Ltd
3 Waring Street
For the attention of: Logan Kevin
BT1 2DX Belfast
UNITED KINGDOM
Telephone: +49 90876000
E-mail: procurement@clanmil.org.uk

Internet address(es):

General address of the contracting authority: www.clanmil.org

Further information can be obtained from: The above mentioned contact point(s)

Specifications and additional documents (including documents for competitive dialogue and a dynamic purchasing system) can be obtained from: The above mentioned contact point(s)

Tenders or requests to participate must be sent to: The above mentioned contact point(s)

I.2)Type of the contracting authority

Body governed by public law

I.3)Main activity

Housing and community amenities

I.4)Contract award on behalf of other contracting authorities

The contracting authority is purchasing on behalf of other contracting authorities: no

Section II: Object of the contract

II.1)Description

II.1.1)Title attributed to the contract by the contracting authority:

TEN/173A — Architect Led Design Team (ALDT) for Bloomfield Road, Bangor.

II.1.2)Type of contract and location of works, place of delivery or of performance

Services
Service category No 12: Architectural services; engineering services and integrated engineering services; urban planning and landscape engineering services; related scientific and technical consulting services; technical testing and analysis services
Main site or location of works, place of delivery or of performance: The site is located at the junction of Bloomfield Road and Lismore Avenue and extends to approximately 1,07 hectares in size. The land within is previously developed as 7 detached dwellings. All the buildings within the site are demolished and the land is overgrown.
There were a number of entrances serving the former dwellings extending from the junction of Lismore Avenue along Bloomfield Road which are now redundant.
The land within is approximately 3 metres lower than the properties at Lismore Avenue to the west of the site. The land also falls away from the junction with Lismore Avenue and Bloomfield Road by approximately 3 metres towards the northern boundary.
The lands to the west are primarily residential in character with 2 storey semi-detached dwellings and flats. A food store and GP Surgery are located to the east of the site and to the south east is Bloomfield Shopping Centre and Retail Park.
Purchase of this site is envisaged to complete mid-June 2016.
We expect to achieve approximately 52 units on the site, with the exact mix to be confirmed.. The building will be constructed to Lifetime Homes and Secured by Design standards.
The Tender Period is 25 days due to the urgency of this appointment.

NUTS code UKN

II.1.3)Information about a public contract, a framework agreement or a dynamic purchasing system (DPS)

The notice involves a public contract
II.1.4)Information on framework agreement

II.1.5)Short description of the contract or purchase(s)

Architect Led Design Team services for the construction of social housing units at Bloomfield Road Bangor.
The units will be constructed to Lifetime Homes, Secured by Design standards.

II.1.6)Common procurement vocabulary (CPV)

71220000, 71221000, 71200000, 71000000

II.1.7)Information about Government Procurement Agreement (GPA)

The contract is covered by the Government Procurement Agreement (GPA): no

II.1.8)Lots

This contract is divided into lots: no

II.1.9)Information about variants

Variants will be accepted: no
II.2)Quantity or scope of the contract

II.2.1)Total quantity or scope:

ALDT to assist in the delivery of Social Housing units at Bloomfield Road Bangor.
Estimated value excluding VAT: 220 000 GBP
II.2.2)Information about options

II.2.3)Information about renewals

This contract is subject to renewal: no
II.3)Duration of the contract or time limit for completion

Section III: Legal, economic, financial and technical information

III.1)Conditions relating to the contract

III.1.1)Deposits and guarantees required:

The Contracting Authority may require guarantees or other security acceptable to the Contracting Authority from tenderers. To be detailed in the Invitation to Tender.

III.1.2)Main financing conditions and payment arrangements and/or reference to the relevant provisions governing them:

To be detailed in the Invitation to Tender.

III.1.3)Legal form to be taken by the group of economic operators to whom the contract is to be awarded:

Subject to the status and involvement of the parties, the Contracting Authority may require parties to commit to joint and several liability in respect of the Contract. Alternatively, the Contracting Authority may expect the lead operator to take total responsibility. The Contracting Authority may require collateral warranties, parent company guarantees and / or performance bonds (as applicable) to be entered into by other economic operators.

III.1.4)Other particular conditions

The performance of the contract is subject to particular conditions: no
III.2)Conditions for participation

III.2.1)Personal situation of economic operators, including requirements relating to enrolment on professional or trade registers

Information and formalities necessary for evaluating if the requirements are met: Requirements will be consistent with those permitted under Directive 2004/18/EC of the European Parliament and of the Council and will be detailed in the Memorandum of Information.

III.2.2)Economic and financial ability

Information and formalities necessary for evaluating if the requirements are met: Evidence must be provided to demonstrate that the Economic Operator and/or members of the consortium have the financial and economic standing required for the contract under the Public Contracts Regulations 2015.
Minimum level(s) of standards possibly required: Comply with the requirements of the appropriate section in the applicable selection questionnaire and memorandum of information. The memorandum of information and applicable questionnaire.

III.2.3)Technical capacity

Information and formalities necessary for evaluating if the requirements are met:
The requirements will be consistent with those permitted under Directive 2004/18/EC of the European Parliament and of the Council and will be detailed in the Memorandum of Information and Selection Questionnaire.
Minimum level(s) of standards possibly required:
The Contracting Authority will require Economic Operators to satisfy minimum standards of technical capacity/professional ability. These are described in detail in the Selection Questionnaire.
III.2.4)Information about reserved contracts
III.3)Conditions specific to services contracts
III.3.1)Information about a particular profession
III.3.2)Staff responsible for the execution of the service

Section IV: Procedure

IV.1)Type of procedure

IV.1.1)Type of procedure

Open
IV.1.2)Limitations on the number of operators who will be invited to tender or to participate
IV.1.3)Reduction of the number of operators during the negotiation or dialogue
IV.2)Award criteria

IV.2.1)Award criteria

The most economically advantageous tender in terms of the criteria stated in the specifications, in the invitation to tender or to negotiate or in the descriptive document

IV.2.2)Information about electronic auction

An electronic auction will be used: no
IV.3)Administrative information

IV.3.1)File reference number attributed by the contracting authority:

TEN/173A

IV.3.2)Previous publication(s) concerning the same contract

no

IV.3.3)Conditions for obtaining specifications and additional documents or descriptive document

Payable documents: no

IV.3.4)Time limit for receipt of tenders or requests to participate

23.5.2016 – 12:00
IV.3.5)Date of dispatch of invitations to tender or to participate to selected candidates

IV.3.6)Language(s) in which tenders or requests to participate may be drawn up

English.
IV.3.7)Minimum time frame during which the tenderer must maintain the tender
IV.3.8)Conditions for opening of tenders

Section VI: Complementary information

VI.1)Information about recurrence

This is a recurrent procurement: no

VI.2)Information about European Union funds

The contract is related to a project and/or programme financed by European Union funds: no

VI.3)Additional information

Suppliers Instructions: How to Express Interest in this Tender: 1. Register your company on the eSourcing portal (this is only required once): https://e-sourcingni.bravosolution.co.uk and click the link to register — Accept the terms and conditions and click ‘I agree’ — Enter your correct business and user details — Note the username you chose and click ‘Save’ when complete — You will shortly receive an email with your unique password (please keep this secure). 2. Express an Interest in the Tender — Login to the portal with the username/password — Click the ‘PQQs / ITTs Open To All Suppliers’ link. (These are Pre-Qualification Questionnaires or Invitations to Tender open to any registered supplier) — Click on the relevant PQQ/ ITT to access the content — Click the ‘Express Interest’ button at the top of the page — This will move the PQQ /ITT into your ‘My PQQs/ My ITTs’ page. (This is a secure area reserved for your projects only) — You can now access any attachments by clicking ‘Buyer Attachments’ in the ‘PQQ/ ITT Details’ box. 3. Responding to the Tender — Click ‘My Response’ under ‘PQQ/ ITT Details’, you can choose to ‘Create Response’ or to ‘Decline to Respond’ (please give a reason if declining) — You can now use the ‘Messages’ function to communicate with the buyer and seek any clarification — Note the deadline for completion, then follow the on-screen instructions to complete the PQQ/ ITT — There may be a mixture of online and offline actions for you to perform (there is detailed online help available). You must then submit your reply using the ‘Submit Response’ button at the top of the page. If you require any further assistance please consult the online help or contact the eTendering help desk.

VI.4)Procedures for appeal

VI.4.1)Body responsible for appeal procedures

The High Court of Justice
Chichester Street
BT1 1EF Belfast

VI.4.2)Lodging of appeals

Precise information on deadline(s) for lodging appeals: A standstill period at the point of information on the award of the contract is communicated to tenderers. That notification will provide full information on the award decision. The standstill period, which will be for a minimum of 10 calendar days, provides time for unsuccessful tenderers to challenge the award decision before the contract is entered into. The Public Contracts Regulations 2015 provide for aggrieved parties who have been harmed or are at risk of harm by a breach of the rules to take action in the High Court (England, Wales and Northern Ireland).
VI.4.3)Service from which information about the lodging of appeals may be obtained

VI.5)Date of dispatch of this notice:

28.4.2016

 

Related Posts

Milton Keynes Council Building Services Framework

Laboratory Design and Construction Work

JCT Design and Build Contract Sheffield

Design and Build Contractor Wokingham

Enjoyed this post? Share it!