Tender for Purchase of 3D Printers

Tender for Purchase of 3D Printers

The University wishes to purchase a number of 3D Printers of different sizes and specifications to use within its Innovation Facility at Pontio.

United Kingdom-Bangor: Printers and plotters

2015/S 096-173707

Contract notice

Supplies

Directive 2004/18/EC

Section I: Contracting authority

I.1)Name, addresses and contact point(s)

Prifysgol Bangor / Bangor University
Estates and Facilities Department, Victoria Drive
Contact point(s): Estates and Facilities Department
For the attention of: Thomas Evans
LL57 2EN Bangor
UNITED KINGDOM
Telephone: +44 1248383097

Internet address(es):

General address of the contracting authority: http://www.bangor.ac.uk

Address of the buyer profile: http://www.sell2wales.gov.uk/search/Search_AuthProfile.aspx?ID=AA0340

Electronic access to information: www.sell2wales.gov.uk

Electronic submission of tenders and requests to participate: www.sell2wales.gov.uk

Further information can be obtained from: The above mentioned contact point(s)

Specifications and additional documents (including documents for competitive dialogue and a dynamic purchasing system) can be obtained from: The above mentioned contact point(s)

Tenders or requests to participate must be sent to: The above mentioned contact point(s)

I.2)Type of the contracting authority

Body governed by public law

I.3)Main activity

Education

I.4)Contract award on behalf of other contracting authorities

The contracting authority is purchasing on behalf of other contracting authorities: no

Section II: Object of the contract

II.1)Description

II.1.1)Title attributed to the contract by the contracting authority:

Pontio Innovation Equipment — 3D Printers.

II.1.2)Type of contract and location of works, place of delivery or of performance

Supplies
Purchase
Main site or location of works, place of delivery or of performance: Pontio Building, Bangor University.

NUTS code UKL12

II.1.3)Information about a public contract, a framework agreement or a dynamic purchasing system (DPS)

The notice involves a public contract
II.1.4)Information on framework agreement

II.1.5)Short description of the contract or purchase(s)

The University wishes to purchase a number of 3D Printers of different sizes and specifications to use within its Innovation Facility at Pontio.

Note: To register your interest in this notice and obtain any additional information please visit the Sell2Wales Web Site athttp://www.sell2wales.gov.uk/Search/Search_Switch.aspx?ID=27248

The buyer has indicated that it will accept electronic responses to this notice via the Postbox facility. A user guide is available athttp://www.sell2wales.gov.uk/sitehelp/help_guides.aspx

Suppliers are advised to allow adequate time for uploading documents and to dispatch the electronic response well in advance of the closing time to avoid any last minute problems.

II.1.6)Common procurement vocabulary (CPV)

30232100

II.1.7)Information about Government Procurement Agreement (GPA)

The contract is covered by the Government Procurement Agreement (GPA): yes

II.1.8)Lots

This contract is divided into lots: yes
Tenders may be submitted for one or more lots

II.1.9)Information about variants

Variants will be accepted: no
II.2)Quantity or scope of the contract
II.2.1)Total quantity or scope:

II.2.2)Information about options

Options: no

II.2.3)Information about renewals

This contract is subject to renewal: no
II.3)Duration of the contract or time limit for completion

Information about lots

Lot No: 1Lot title: Commercial Level Polymer 3D Printer

1)Short description

As per specification included within ITT.

2)Common procurement vocabulary (CPV)

30232100

3)Quantity or scope

1.
4)Indication about different date for duration of contract or starting/completion
5)Additional information about lots

Lot No: 2Lot title: Commercial Level FDM 3D Printer

1)Short description

As per specification included within ITT.

2)Common procurement vocabulary (CPV)

30232100

3)Quantity or scope

1.
4)Indication about different date for duration of contract or starting/completion
5)Additional information about lots

Lot No: 3Lot title: Commercial Level Full Colour 3D Printer

1)Short description

As per specification included within ITT.

2)Common procurement vocabulary (CPV)

30232100

3)Quantity or scope

1.
4)Indication about different date for duration of contract or starting/completion
5)Additional information about lots

Lot No: 4Lot title: Consumer Level FDM 3D Printers

1)Short description

As per specification included within ITT.

2)Common procurement vocabulary (CPV)

30232100

3)Quantity or scope

7.
4)Indication about different date for duration of contract or starting/completion
5)Additional information about lots

Lot No: 5Lot title: 3D Scanner

1)Short description

As per specification included within ITT.

2)Common procurement vocabulary (CPV)

30232100, 30216110

3)Quantity or scope

1.
4)Indication about different date for duration of contract or starting/completion
5)Additional information about lots

Section III: Legal, economic, financial and technical information

III.1)Conditions relating to the contract
III.1.1)Deposits and guarantees required:
III.1.2)Main financing conditions and payment arrangements and/or reference to the relevant provisions governing them:
III.1.3)Legal form to be taken by the group of economic operators to whom the contract is to be awarded:

III.1.4)Other particular conditions

The performance of the contract is subject to particular conditions: no
III.2)Conditions for participation
III.2.1)Personal situation of economic operators, including requirements relating to enrolment on professional or trade registers
III.2.2)Economic and financial ability
III.2.3)Technical capacity
III.2.4)Information about reserved contracts
III.3)Conditions specific to services contracts
III.3.1)Information about a particular profession
III.3.2)Staff responsible for the execution of the service

Section IV: Procedure

IV.1)Type of procedure

IV.1.1)Type of procedure

Open
IV.1.2)Limitations on the number of operators who will be invited to tender or to participate
IV.1.3)Reduction of the number of operators during the negotiation or dialogue
IV.2)Award criteria

IV.2.1)Award criteria

The most economically advantageous tender in terms of the criteria stated in the specifications, in the invitation to tender or to negotiate or in the descriptive document

IV.2.2)Information about electronic auction

An electronic auction will be used: no
IV.3)Administrative information
IV.3.1)File reference number attributed by the contracting authority:
IV.3.2)Previous publication(s) concerning the same contract
IV.3.3)Conditions for obtaining specifications and additional documents or descriptive document

IV.3.4)Time limit for receipt of tenders or requests to participate

15.6.2015 – 12:00
IV.3.5)Date of dispatch of invitations to tender or to participate to selected candidates

IV.3.6)Language(s) in which tenders or requests to participate may be drawn up

English.
IV.3.7)Minimum time frame during which the tenderer must maintain the tender
IV.3.8)Conditions for opening of tenders

Section VI: Complementary information

VI.1)Information about recurrence

VI.2)Information about European Union funds

The contract is related to a project and/or programme financed by European Union funds: yes
Reference to project(s) and/or programme(s): This project is subject to WEFO funding.

VI.3)Additional information

(WA Ref: 27248).
VI.4)Procedures for appeal
VI.4.1)Body responsible for appeal procedures
VI.4.2)Lodging of appeals
VI.4.3)Service from which information about the lodging of appeals may be obtained

VI.5)Date of dispatch of this notice:

15.5.2015

Enjoyed this post? Share it!