University of Sheffield Training Services Framework

University of Sheffield Training Services Framework

Manufacturing Leadership, Health and Safety and Continuous Improvement Programmes (19 Lots).

United Kingdom-Sheffield: Education and training services

2016/S 172-309975

Contract notice

Services

Directive 2004/18/EC

Section I: Contracting authority

I.1)Name, addresses and contact point(s)

The University of Sheffield
Procurement Office, Arts Tower, Western Bank
Contact point(s): https://in-tendhost.co.uk/sheffield
For the attention of: Sylwia Wiaderna
S10 2TN Sheffield
United Kingdom
Telephone: +44 1142227662
E-mail: s.wiaderna@sheffield.ac.uk

Internet address(es):

General address of the contracting authority: https://www.sheffield.ac.uk

Address of the buyer profile: https://in-tendhost.co.uk/sheffield

Further information can be obtained from: The above mentioned contact point(s)

Specifications and additional documents (including documents for competitive dialogue and a dynamic purchasing system) can be obtained from:The above mentioned contact point(s)

Tenders or requests to participate must be sent to: The above mentioned contact point(s)

I.2)Type of the contracting authority

Body governed by public law

I.3)Main activity

Education

I.4)Contract award on behalf of other contracting authorities

The contracting authority is purchasing on behalf of other contracting authorities: no

Section II: Object of the contract

II.1)Description

II.1.1)Title attributed to the contract by the contracting authority:

1494/301/SW/TC/16 Training Services Framework — Manufacturing Leadership, Health and Safety and Continuous Improvement Programmes (19 Lots).

II.1.2)Type of contract and location of works, place of delivery or of performance

Services
Service category No 27: Other services
Main site or location of works, place of delivery or of performance: Training Centre
Advanced Manufacturing Research Centre.

NUTS code UKE31

II.1.3)Information about a public contract, a framework agreement or a dynamic purchasing system (DPS)

The notice involves the establishment of a framework agreement

II.1.4)Information on framework agreement

Framework agreement with several operators

Duration of the framework agreement

Duration in years: 2

Estimated total value of purchases for the entire duration of the framework agreement

Estimated value excluding VAT:
Range: between 60 000 and 120 000 GBP

II.1.5)Short description of the contract or purchase(s)

1494/301/SW/TC/16 Training Services Framework — Manufacturing Leadership, Health and Safety and Continuous Improvement Programmes (19 Lots)
The University of Sheffield wishes to invite tenders for the supply of services to the Advanced Manufacturing Research Centre’s Training Centre at Catcliffe in Rotherham.
Scope of Requirement:
This procurement is for the provision of a number of trainers to support delivery of training courses within the Training Centre. Trainers should have specific experience and expertise in the delivery of Manufacturing Leadership, Continuous Improvement and Health & Safety Programmes. Significant experience of staff training on-site and within a training centre would be an advantage.
Tender Process and Documentation:

This is an E.U. open exercise. The ITT can be downloaded by registering and expressing your interest on the University’s e-tendering system https://in-tendhost.co.uk/Sheffield

If you have any questions or comments in relation to this tender they must be submitted via the In-tend System, this can be accessed at https://in-tendhost.co.uk/Sheffield

Completed tenders must be returned through the same e-tendering system.
Closing date for receipt of tenders: 3.10.2016 at 12 noon (UK time).

II.1.6)Common procurement vocabulary (CPV)

80000000, 80511000, 80510000, 80531000, 80561000, 80521000, 79632000, 80532000, 80500000, 80531200, 80531100, 80550000, 80570000

II.1.7)Information about Government Procurement Agreement (GPA)

The contract is covered by the Government Procurement Agreement (GPA): no

II.1.8)Lots

This contract is divided into lots: yes
Tenders may be submitted for one or more lots

II.1.9)Information about variants

Variants will be accepted: no
II.2)Quantity or scope of the contract

II.2.1)Total quantity or scope:

Delivery of training services as per the specification of the requirement.
Estimated value excluding VAT:
Range: between 60 000 and 120 000 GBP

II.2.2)Information about options

Options: yes
Description of these options: Contract period: 1.1.2017 — 31.10.2018 with an option to extend annually on each anniversary of the contract until 31.10.2020.
It is anticipated that the value of the framework will be in the region of GBP 60 000 per annum across all requirements.

II.2.3)Information about renewals

This contract is subject to renewal: yes
Number of possible renewals: 2

II.3)Duration of the contract or time limit for completion

Starting 1.1.2017. Completion 31.12.2018

Section III: Legal, economic, financial and technical information

III.1)Conditions relating to the contract

III.1.1)Deposits and guarantees required:

None.

III.1.2)Main financing conditions and payment arrangements and/or reference to the relevant provisions governing them:

Payment terms 100 % 30 days net.

III.1.3)Legal form to be taken by the group of economic operators to whom the contract is to be awarded:

Joint and several liability.
III.1.4)Other particular conditions
III.2)Conditions for participation

III.2.1)Personal situation of economic operators, including requirements relating to enrolment on professional or trade registers

Information and formalities necessary for evaluating if the requirements are met: Suppliers must past the Selection Criteria to have their tender included in the evaluation process.

III.2.2)Economic and financial ability

Information and formalities necessary for evaluating if the requirements are met: Suppliers must past the Selection Criteria to have their tender included in the evaluation process.
Minimum level(s) of standards possibly required: Pass / Fail.

III.2.3)Technical capacity

Information and formalities necessary for evaluating if the requirements are met:
As per tender documents.
Minimum level(s) of standards possibly required:
As per the published scoring scheme.
III.2.4)Information about reserved contracts
III.3)Conditions specific to services contracts
III.3.1)Information about a particular profession

III.3.2)Staff responsible for the execution of the service

Legal persons should indicate the names and professional qualifications of the staff responsible for the execution of the service: no

Section IV: Procedure

IV.1)Type of procedure

IV.1.1)Type of procedure

Open
IV.1.2)Limitations on the number of operators who will be invited to tender or to participate
IV.1.3)Reduction of the number of operators during the negotiation or dialogue
IV.2)Award criteria

IV.2.1)Award criteria

The most economically advantageous tender in terms of the criteria stated below

1. Commercial / Competitie Price. Weighting 25

2. Knowledge and Expertise. Weighting 25

3. Delivery of Training Courses. Weighting 15

4. Experience. Weighting 10

5. Distance Teaching. Weighting 5

6. Resource and CVs. Weighting 10

7. Service Continuity. Weighting 10

IV.2.2)Information about electronic auction

An electronic auction will be used: no
IV.3)Administrative information

IV.3.1)File reference number attributed by the contracting authority:

1494/301/SW/TC/16

IV.3.2)Previous publication(s) concerning the same contract

no

IV.3.3)Conditions for obtaining specifications and additional documents or descriptive document

Time limit for receipt of requests for documents or for accessing documents: 28.9.2016
Payable documents: no

IV.3.4)Time limit for receipt of tenders or requests to participate

3.10.2016 – 12:00
IV.3.5)Date of dispatch of invitations to tender or to participate to selected candidates

IV.3.6)Language(s) in which tenders or requests to participate may be drawn up

English.

IV.3.7)Minimum time frame during which the tenderer must maintain the tender

Duration in months: 3 (from the date stated for receipt of tender)

IV.3.8)Conditions for opening of tenders

Date: 3.10.2016 – 13:00

Place:

The University of Sheffield

Persons authorised to be present at the opening of tenders: yes
Additional information about authorised persons and opening procedure: Authorised Officers of the University.

Section VI: Complementary information

VI.1)Information about recurrence

VI.2)Information about European Union funds

The contract is related to a project and/or programme financed by European Union funds: no
VI.3)Additional information
VI.4)Procedures for appeal
VI.4.1)Body responsible for appeal procedures

VI.4.2)Lodging of appeals

Precise information on deadline(s) for lodging appeals: The contracting authority will incorporate a minimum ten-day standstill period at the point information on the award of Contract is communicated to tenderers. This period allows unsuccessful tenderers to seek a further debriefing before the Contract is entered into. If an appeal regarding the award of Contract cannot be resolved, the Public Contract Regulations 2015 provides for aggrieved parties to take action in the High Court (England, Wales and Northern Ireland). Any such action should be brought promptly (generally within 30 days).
VI.4.3)Service from which information about the lodging of appeals may be obtained

VI.5)Date of dispatch of this notice:

2.9.2016

 

Related Posts

Leadership and Management Skills in Maths and English

Leadership Development Training Modules – Request for Quotations

Executive Coaching Sheffield and London

Oil and Gas Transition Training Fund Tranche 2

Enjoyed this post? Share it!