Civil Engineering Framework: Works over GBP 250,000
The main users of the Framework Agreement will be Technical Services, Highway Services Department however the Framework will be available for use by Durham County Council or an associated body.
United Kingdom-Durham: Construction work
Section I: Contracting authority
I.1)Name, addresses and contact point(s)
Durham County Council
Corporate Procurement, County Hall
For the attention of: Richard Carroll
DH1 5UL Durham
General address of the contracting authority: http://www.durham.gov.uk
Electronic access to information: http://www.nepoportal.org
Further information can be obtained from: The above mentioned contact point(s)
Specifications and additional documents (including documents for competitive dialogue and a dynamic purchasing system) can be obtained from: The above mentioned contact point(s)
Tenders or requests to participate must be sent to: The above mentioned contact point(s)
I.2)Type of the contracting authority
Regional or local authority
General public services
I.4)Contract award on behalf of other contracting authorities
The contracting authority is purchasing on behalf of other contracting authorities: no
Section II: Object of the contract
II.1.1)Title attributed to the contract by the contracting authority:
Civil Engineering Framework: Works over GBP 250,000.
II.1.2)Type of contract and location of works, place of delivery or of performance
NUTS code UKC14
II.1.3)Information about a public contract, a framework agreement or a dynamic purchasing system (DPS)
The notice involves the establishment of a framework agreement
II.1.4)Information on framework agreement
Framework agreement with several operators
maximum number of participants to the framework agreement envisaged: 5
Duration of the framework agreement
Duration in months: 48
II.1.5)Short description of the contract or purchase(s)
This procurement exercise is for the implementation of a Framework Agreement for the delivery of Civil Engineering Works valued over GBP 250,000 on behalf of Durham County Council. The main users of the Framework Agreement will be Technical Services, Highway Services Department however the Framework will be available for use by Durham County Council or an associated body.
II.1.6)Common procurement vocabulary (CPV)
II.1.7)Information about Government Procurement Agreement (GPA)
The contract is covered by the Government Procurement Agreement (GPA): yes
This contract is divided into lots: no
II.1.9)Information about variants
Variants will be accepted: no
II.2)Quantity or scope of the contract
II.2.1)Total quantity or scope:
II.2.2)Information about options
II.2.3)Information about renewals
II.3)Duration of the contract or time limit for completion
Section III: Legal, economic, financial and technical information
III.1)Conditions relating to the contract
III.1.1)Deposits and guarantees required:
The Council reserves the right to require deposits, guarantees, bonds or other forms of appropriate security.
Further details will be set out in the tender documents, if relevant.
III.1.2)Main financing conditions and payment arrangements and/or reference to the relevant provisions governing them:
To be set out in the tender documents.
III.1.3)Legal form to be taken by the group of economic operators to whom the contract is to be awarded:
The Council reserves the right to require groupings of service providers to take a particular legal form or to require a single provider to take primary liability or to require each party to undertake joint and several liability, if relevant. Further details will be set out in the tender documents.
III.1.4)Other particular conditions
The performance of the contract is subject to particular conditions: yes
Description of particular conditions: The Council has undertaken a commitment to ensure wider social and community benefits are achieved in the course of all its commissioning and procurement activities. In accordance with this, Bidders may be required to work with the Council towards achieving such aims.
III.2)Conditions for participation
III.2.1)Personal situation of economic operators, including requirements relating to enrolment on professional or trade registers
Information and formalities necessary for evaluating if the requirements are met: In accordance with Articles 45-50 of Directive 2004/18/EC and Regulations 23-29 of the Public Contract Regulations 2006 and as set out in the Pre Qualification Questionnaire (PQQ) available from the NEPO Portal as detailed in VI.3.
III.2.2)Economic and financial ability
Information and formalities necessary for evaluating if the requirements are met: In accordance with Article 47 of Directive 2004/18/ EC and Regulation 24 of the Public Contract Regulations 2006 and as set out in the Pre Qualification Questionnaire (PQQ) available from the NEPO Portal as detailed in Section VI.3.
Minimum level(s) of standards possibly required: 1. Public Liability – GBP 5 million
2. Employers Liability – GBP 10 million
3. Professional Indemnity – GBP 1 million
4. Motor Vehicle – GBP 5 million
Bidders must also achieve a minumum turnover level of GBP 3 million and will undergo a further credit assessment (full details in the PQQ).
Information and formalities necessary for evaluating if the requirements are met:
In accordance with Articles 48-50 of Directive 2004/18/EC and Regulation 25 of the Public Contract Regulations 2006 and as set out in the Pre Qualification Questionnaire (PQQ) available from the NEPO portal as detailed in section VI.3.
Minimum level(s) of standards possibly required:
Bidders must successfully pass parts B-E of the PQQ, in line with the evaluation criteria listed. Parts B-E of the PQQ include;
grounds for exclusion; insurance; health and safety and equality and diversity.
The Council intends to invite a maximum of 10 bidders to tender on condition that each of the 10 bidders pass Sections B-E and achieve a final minimum score of 65% or more in Section F (Technical Questions).
III.2.4)Information about reserved contracts
III.3)Conditions specific to services contracts
III.3.1)Information about a particular profession
III.3.2)Staff responsible for the execution of the service
Section IV: Procedure
IV.1)Type of procedure
IV.1.1)Type of procedure
IV.1.2)Limitations on the number of operators who will be invited to tender or to participate
Envisaged number of operators: 10
Objective criteria for choosing the limited number of candidates: In accordance with the Public Contract Regulations 2006 and as outlined in the Pre Qualification Questionnaire(PQQ).
IV.1.3)Reduction of the number of operators during the negotiation or dialogue
The most economically advantageous tender in terms of the criteria stated in the specifications, in the invitation to tender or to negotiate or in the descriptive document
IV.2.2)Information about electronic auction
An electronic auction will be used: no
IV.3.1)File reference number attributed by the contracting authority:
IV.3.2)Previous publication(s) concerning the same contract
IV.3.3)Conditions for obtaining specifications and additional documents or descriptive document
Time limit for receipt of requests for documents or for accessing documents: 4.10.2013 – 16:00
IV.3.4)Time limit for receipt of tenders or requests to participate
9.10.2013 – 16:00
IV.3.5)Date of dispatch of invitations to tender or to participate to selected candidates
IV.3.6)Language(s) in which tenders or requests to participate may be drawn up
IV.3.7)Minimum time frame during which the tenderer must maintain the tender
IV.3.8)Conditions for opening of tenders
Section VI: Complementary information
VI.1)Information about recurrence
VI.2)Information about European Union funds
The Pre Qualification Questionnaire (PQQ) is available for download via www.nepoportal.org. Access the Supplier area, select Durham and input QTLE-.9B8KEP It is envisaged that the number of operators invited to tender will be 10.
VI.4)Procedures for appeal
VI.4.1)Body responsible for appeal procedures
VI.4.2)Lodging of appeals
Precise information on deadline(s) for lodging appeals: The Council will incorporate a standstill period when the contract award decision is communicated to bidders.
That notification will provide full information on the award decision. The standstill period which will be for a minimum of 10 calendar days, provides time for unsuccessful bidders to challenge the award decision before the contract is entered into. The Public Contract Regulations 2006 (SI 2006 No 5) (as amended) provide the aggrieved parties who have been harmed or are at risk of harm by a breach of the rules to take action in the High Court (England, Wales and Northern Ireland).
VI.4.3)Service from which information about the lodging of appeals may be obtained
VI.5)Date of dispatch of this notice:4.9.2013