Hybrid Smart Cards Tender
Production and Delivery of Hybrid Smart Cards containing an Atmel and Mifare Desfire chip and also Smart Cards containing a Mifare Desfire chip only.
UK-Twickenham: Smart cards
Section I: Contracting authority
London Borough of Richmond upon Thames
Civic Centre, 44 York Street
For the attention of: Carl Morlese
TW1 3BZ Twickenham
Telephone: +44 2084875360
General address of the contracting authority: www.richmond.gov.uk
Further information can be obtained from: The above mentioned contact point(s)
Specifications and additional documents (including documents for competitive dialogue and a dynamic purchasing system) can be obtained from: The above mentioned contact point(s)
Tenders or requests to participate must be sent to: The above mentioned contact point(s)
Section II: Object of the contract
NUTS code UKI22
CR80 ISO Standard laminated plastic proximity card, 86 x 54 mm. Surface mounted Atmel contact chip set reference AT88SC1003.
Mifare DESfire Chip: MF31CD21 (2k version).
The single chips cards must have the Mifare DESfire Chip: MF31CD21 (2k version).
Cards will be pre- printed on the front side with a 4 colour design to Richmond Specification.
Section III: Legal, economic, financial and technical information
(b) The presentation of balance-sheets or extracts from the balance-sheets, where publication of the balance-sheet is required under the law of the country in which the economic operator is established.
(c) A statement of the undertaking’s overall turnover and, where appropriate, of turnover in the area covered by the contract for a maximum of the last 3 financial years available, depending on the date on which the undertaking was set up or the economic operator started trading, as far as the information on these turnovers is available
as specified in tender documents.
Minimum level(s) of standards possibly required: As specified in tender documents.
(a) A list of the works carried out over the past five years, accompanied by certificates of satisfactory execution for the most important works. These certificates shall indicate the value, date and site of the works and shall specify whether they were carried out according to the rules of the trade and properly completed. Where appropriate, the competent authority shall submit these certificates to the contracting authority direct.
(b) A list of the principal deliveries effected or the main services provided in the past 3 years, with the sums, dates and recipients, whether public or private, involved. Evidence of delivery and services provided shall be given: – where the recipient was a contracting authority, in the form of certificates issued or countersigned by the competent authority, – where the recipient was a private purchaser, by the purchaser’s certification or, failing this, simply by a declaration by the economic operator.
(c) An indication of the technicians or technical bodies involved, whether or not belonging directly to the economic operator’s undertaking, especially those responsible for quality control and, in the case of public works contracts, those upon whom the contractor can call in order to carry out the work.
(d) A description of the technical facilities and measures used by the supplier or service provider for ensuring quality and the undertaking’s study and research facilities.
(e) Where the products or services to be supplied are complex or, exceptionally, are required for a special purpose, a check carried out by the contracting authorities or on their behalf by a competent official body of the country in which the supplier or service provider is established, subject to that body’s agreement, on the production capacities of the supplier or the technical capacity of the service provider and, if necessary, on the means of study and research which are available to it and the quality control measures it will operate.
(f) The educational and professional qualifications of the service provider or contractor and/or those of the undertaking’s managerial staff and, in particular, those of the person or persons responsible for providing the services or managing the work.
(g) For public works contracts and public services contracts, and only in appropriate cases, an indication of the environmental management measures that the economic operator will be able to apply when performing the contract.
(h) A statement of the average annual manpower of the service provider or contractor and the number of managerial staff for the last 3 years.
(i) A statement of the tools, plant or technical equipment available to the service provider or contractor for carrying out the contract.
(j) An indication of the proportion of the contract which the services provider intends possibly to subcontract.
(k) With regard to the products to be supplied: (i) samples, descriptions and/or photographs, the authenticity of which must be certified if the contracting authority so requests; (ii) certificates drawn up by official quality control institutes or agencies of recognised competence attesting the conformity of products clearly identified by references to specifications or standards.
As specified in tender documents.
Minimum level(s) of standards possibly required:
As specified in tender documents.
Section IV: Procedure
Justification for the choice of accelerated procedure: The contract value is below EU threshold and a standard item. OJEU being used to obtain the maximum exposure and enhance competition.
Payable documents: no
Section VI: Complementary information
GO Reference: GO-2013220-PRO-4601013.
VI.5)Date of dispatch of this notice:20.2.2013