London Gateway Berth 3 Landside Works

London Gateway Berth 3 Landside Works

As part of the continuing development of London Gateway, the Berth 3 stack area, interchanges and associated pavement, services and infrastructure Including electrical are to be constructed.

United Kingdom-Stanford-le-Hope: Construction work

2013/S 215-373324

Contract notice

Works

Directive 2004/18/EC

Section I: Contracting authority

I.1)Name, addresses and contact point(s)

London Gateway
Gate 2 The Manorway
Contact point(s): Engineering Director
For the attention of: Andrew Bowen
SS17 9PD Stanford-le-Hope
UNITED KINGDOM
Telephone: +44 1375648300
E-mail: andrew.bowen@dpworld.com

Internet address(es):

General address of the contracting authority: www.londongateway.com

Further information can be obtained from: The above mentioned contact point(s)

Specifications and additional documents (including documents for competitive dialogue and a dynamic purchasing system) can be obtained from: The above mentioned contact point(s)

Tenders or requests to participate must be sent to: The above mentioned contact point(s)

I.2)Type of the contracting authority

Other: London Gateway Port Limited
I.3)Main activity

Other: Port related activities
I.4)Contract award on behalf of other contracting authorities

The contracting authority is purchasing on behalf of other contracting authorities: no

Section II: Object of the contract

II.1)Description
II.1.1)Title attributed to the contract by the contracting authority:

Berth 3 Landside Works.
II.1.2)Type of contract and location of works, place of delivery or of performance

Works
Execution
Main site or location of works, place of delivery or of performance: The Manorway, Stanford Le Hope, Essex, SS17 9PD United Kingdom.
NUTS code UKH32

II.1.3)Information about a public contract, a framework agreement or a dynamic purchasing system (DPS)

The notice involves a public contract
II.1.4)Information on framework agreement
II.1.5)Short description of the contract or purchase(s)

As part of the continuing development of London Gateway, the Berth 3 stack area, interchanges and associated pavement, services and infrastructure Including electrical are to be constructed. The main works in this package will be procured on a construct only basis. Certain minor/ peripheral aspects of the works may however be procured on a design and construct basis and these will be confirmed at a later stage.
II.1.6)Common procurement vocabulary (CPV)

45000000, 65100000, 45233220, 45232450, 71314100, 32571000, 44212320, 51110000

II.1.7)Information about Government Procurement Agreement (GPA)

The contract is covered by the Government Procurement Agreement (GPA): no
II.1.8)Lots

This contract is divided into lots: no
II.1.9)Information about variants

Variants will be accepted: no
II.2)Quantity or scope of the contract
II.2.1)Total quantity or scope:
II.2.2)Information about options

Options: no
II.2.3)Information about renewals
II.3)Duration of the contract or time limit for completion

Duration in months: 9 (from the award of the contract)

Section III: Legal, economic, financial and technical information

III.1)Conditions relating to the contract
III.1.1)Deposits and guarantees required:

The contracting entity reserves the right to acquire deposits, parent company guarantees, PCG and performance guarantee bonds are required
III.1.2)Main financing conditions and payment arrangements and/or reference to the relevant provisions governing them:

To be agreed as part of financing package.
III.1.3)Legal form to be taken by the group of economic operators to whom the contract is to be awarded:

Members of a consortium will be required to become jointly and severally liable for the project
III.1.4)Other particular conditions

The performance of the contract is subject to particular conditions: no
III.2)Conditions for participation
III.2.1)Personal situation of economic operators, including requirements relating to enrolment on professional or trade registers

Information and formalities necessary for evaluating if the requirements are met: Candidates must answer all the questions in Section III.2. (Conditions for participation) by reference to the numbering as set out below. It is prohibited for candidates to collaborate with other candidates, other than with the express written consent of the contracting entity. The contracting entity reserves the right to require any candidate to clarify in writing any information provided in its submission and/or provide additional information (and failure to respond adequately may result in the candidate being disqualified). The contracting entity reserves the right to disqualify immediately any candidate who submits misleading or incomplete information.
1. The name (previous trading name if different, and nature of the candidate’s organisation e.g. company, partnership or consortium);
2. Type of organisation, registered number, year of registration, registered address;
3. Contact name, address, telephone and facsimile numbers, and email address for the candidate;
4. In the case of a consortium candidate, the names and legal status of each of the constituent members;
5. Where applicable, the name of the ultimate holding of the candidate;
6. Where applicable, detail of any groups of companies to which the candidate belongs;
7. Regulation 26(3) and regulation 26(5) of the utilities contracts regulations 2006 apply to the qualification process. In its submission the candidate must provide a binding statement that:
(a) the matters listed in Regulation 26(1) do not apply at any time in the past to the candidate or its directors or any person who has powers of representation, decision or control over the candidate; and
(b) the matters listed in regulation 26(5) do not apply and have not applied at any time in the past to the candidate. In the case of a consortium candidate, the binding statement described above must be provided by each member of the consortium.
III.2.2)Economic and financial ability
III.2.3)Technical capacity

Information and formalities necessary for evaluating if the requirements are met:
The relevant means of proof will be specified in the pre-qualification questionnaire.
III.2.4)Information about reserved contracts
III.3)Conditions specific to services contracts
III.3.1)Information about a particular profession
III.3.2)Staff responsible for the execution of the service

Section IV: Procedure

IV.1)Type of procedure
IV.1.1)Type of procedure

Negotiated
Some candidates have already been selected (if appropriate under certain types of negotiated procedures) no
IV.1.2)Limitations on the number of operators who will be invited to tender or to participate
IV.1.3)Reduction of the number of operators during the negotiation or dialogue
IV.2)Award criteria
IV.2.1)Award criteria

The most economically advantageous tender in terms of the criteria stated below

1. Technical specifications. Weighting 30

2. Commercial. Weighting 60

3. Other. Weighting 10

IV.2.2)Information about electronic auction

An electronic auction will be used: no
IV.3)Administrative information
IV.3.1)File reference number attributed by the contracting authority:
IV.3.2)Previous publication(s) concerning the same contract

no
IV.3.3)Conditions for obtaining specifications and additional documents or descriptive document

Time limit for receipt of requests for documents or for accessing documents: 2.12.2013
Payable documents: no
IV.3.4)Time limit for receipt of tenders or requests to participate

9.12.2013
IV.3.5)Date of dispatch of invitations to tender or to participate to selected candidates
IV.3.6)Language(s) in which tenders or requests to participate may be drawn up

English.
IV.3.7)Minimum time frame during which the tenderer must maintain the tender
IV.3.8)Conditions for opening of tenders

Section VI: Complementary information

VI.1)Information about recurrence

This is a recurrent procurement: no
VI.2)Information about European Union funds

The contract is related to a project and/or programme financed by European Union funds: no
VI.3)Additional information

The contracting entity is not and shall not be liable for any costs incurred by those expressing interest or negotiating or tendering for this contract opportunity. Tenders and all supporting documentation to be priced in pound sterling. Any resulting contract will be considered a contract made in England according to English law. Compliance with all relevant legislation required both in the contract award procedure and during the term of any resulting contract. The contracting entity reserves the right not to award a contract, to make whatever changes it sees fit to the structure and timing of the procurement process and to cancel the process in its entirety at any stage.
VI.4)Procedures for appeal
VI.4.1)Body responsible for appeal procedures
VI.4.2)Lodging of appeals
VI.4.3)Service from which information about the lodging of appeals may be obtained

VI.5)Date of dispatch of this notice:4.11.2013