Mediation and Disagreement Resolution Service for Kent County Council
The provision of Mediation and Disagreement Resolution Services to the South East Group (16 Local Authorities located within the South East of England).
United Kingdom-Maidstone: Special education services
2014/S 215-381034
Contract notice
Services
Directive 2004/18/EC
Section I: Contracting authority
I.1)Name, addresses and contact point(s)
Kent County Council
County Hall
Contact point(s): www.kentbusinessportal.com
For the attention of: Mrs Therese Hammond
ME14 1XQ Maidstone
UNITED KINGDOM
Internet address(es):
General address of the contracting authority: www.kentbusinessportal.com
Address of the buyer profile: www.kent.gov.uk
I.2)Type of the contracting authority
I.3)Main activity
I.4)Contract award on behalf of other contracting authorities
Section II: Object of the contract
II.1.1)Title attributed to the contract by the contracting authority:
II.1.2)Type of contract and location of works, place of delivery or of performance
Service category No 25: Health and social services
Main site or location of works, place of delivery or of performance: South East of England.
NUTS code UKJ
II.1.3)Information about a public contract, a framework agreement or a dynamic purchasing system (DPS)
II.1.5)Short description of the contract or purchase(s)
II.1.6)Common procurement vocabulary (CPV)
80340000, 85000000
II.1.7)Information about Government Procurement Agreement (GPA)
II.1.8)Lots
II.1.9)Information about variants
II.2.1)Total quantity or scope:
Estimated value excluding VAT:
Range: between 450 000 and 900 000 GBP
II.2.2)Information about options
II.3)Duration of the contract or time limit for completion
Section III: Legal, economic, financial and technical information
III.1.1)Deposits and guarantees required:
III.1.2)Main financing conditions and payment arrangements and/or reference to the relevant provisions governing them:
III.1.4)Other particular conditions
Description of particular conditions: The performance of Service Providers will be monitored.
Full details are within the tender document.
III.2.1)Personal situation of economic operators, including requirements relating to enrolment on professional or trade registers
(a) is bankrupt or is being wound up, where his affairs are being administered by the court, where he has entered into an arrangement with creditors, where he has suspended business activities or is in any analogous situation arising from a similar procedure under national laws and regulations;
(b) is the subject of proceedings for a declaration of bankruptcy, for an order compulsory winding up the administration by the court or of an arrangement with creditors or of any other similar proceedings under national laws and regulations;
(c) has been convicted by a judgement which has the force of res judicata in accordance with the legal provisions of the country of any offence concerning his professional conduct;
(d) has been guilty of grave professional misconduct proven by any means which the contract authorities can demonstrate;
(e) has not fulfilled obligations relating to the payment of social security contributions in accordance with the legal provisions of the country in which he is established or with those of the country of the contracting authority;
(f) has not fulfilled obligations relating to the payment of taxes in accordance with the legal provisions of the country in which he is established or with those of the country of the contracting authority;
(g) is guilty of serious misrepresentation in supplying the information required under this Section or has not supplied such information;
(h) has been the subject of a conviction for participation in a criminal organization, as defined in Article 2(1) of Council Joint Action 98/733/JHA;
(i) has been the subject of a conviction for corruption, as defined in Article 3 of the Council Act of 26 May 1972 and Article 3(1) of Council Joint Action 98/742/JHA3 respectively;
(j)has been the subject of a conviction for fraud within the meaning of Article 1 of the Convention relating to the protection of the financial interests of the European Communities;
(k) has been the subject of a conviction for money laundering, as defined in Article 1 of Council Directive 91/308/EEC of 10 June 1991 on prevention of the use of the financial system for the purpose of money laundering.
Information and formalities necessary for evaluating if requirements are met:
In accordance with articles 45-50 or Directive 2004/15/EC and Regulations 23-25 of the Public Contracts Regulations 2006.
III.2.2)Economic and financial ability
(b) the presentation of balance-sheets or extracts from the balance-sheets, where publication of the balance-sheet is required under the law of the country in which the economic operator is established;
(c) a statement of the undertaking’s overall turnover and, where appropriate, of turnover in the area covered by the contract for a maximum of the last 3 financial years available, depending on the date on which the undertaking was set up or the economic operator started trading, as far as the information of these turnovers is available.
Information and formalities necessary for evaluating if requirements are met:
In accordance with articles 47 or Directive 2004/18/EC and Regulation 24 of the Public Contracts Regulation 2006.
III.2.3)Technical capacity
(a) a list of the works carried out over the past 5 years, accompanied by certificates of satisfactory execution for the most important works. These certificates shall indicate the value, date and site of the works and shall specify whether they were carried out according to the rules of the trade and properly completed. Where appropriate, the competent authority shall submit these certificates to the contracting authority direct;
(b) a list of the principal deliveries effected or the main services provided in the past 3 years, with the sums, dates and recipients, whether public or private, involved. Evidence of delivery and services provided shall be given: — where the recipient was a contracting authority, in the form of certificates issues or countersigned by the competent authority, – where the recipient was a private purchaser, by the purchaser’s certification or, failing this, simply by a declaration by the economic operator;
(c) an indication of the technicians or technical bodies involved, whether or not belonging directly to the economic operator’s undertaking, especially those responsible for quality control and, in the case of public works contracts, those upon whom the contractor can call in order to carry out the work;
(d) a description of the technical facilities and measures used by the supplier or service provider for ensuring quality and the undertaking’s study and research facilities;
(e) where the products or services to be supplied are complex or, exceptionally, are required for a special purpose, a check carried out by the contracting authorities or on their behalf by a competent official body of the country in which the supplier or service provider is established, subject to that body’s agreement, on the production capabilities of the supplier or the technical capacity of the service provider and, if necessary, on the means of study and research which are available to it and the quality control measures it will operate;
(f) the educational and professional qualifications of the service provider or contractor and/or those of the undertaking’s managerial staff and, in particular, those of the person or persons responsible for providing the services or managing the work;
(g) for public works contracts and public services contracts, and only in appropriate cases, and indication of the environmental management measures that the economic operator will be able to apply when performing the contract;
(h) a statement of the average annual manpower of the service provider or contractor and the number of managerial staff for the last 3 years;
(i) a statement of the tools, plant or technical equipment available to the service provider or contractor for carrying out the contracts;
(j) an indication of the proportion of the contract which the services provider intends possibly to subcontract;
(k) with regard to the products to be supplied: (i) samples, descriptions and/or photographs, the authenticity of which must be certified if the contracting authority so request; (ii) certificates drawn up by official quality control institutes or agencies of recognized competence attesting the conformity of products clearly identified by references to specifications or standards.
Information and formalities necessary for evaluating if requirements are met:
In accordance with articles 48-50 or Directive 2004/18EC and Regulation 25 of the Public Contracts Regulations 2006.
III.3.1)Information about a particular profession
III.3.2)Staff responsible for the execution of the service
Section IV: Procedure
IV.1.1)Type of procedure
IV.2.1)Award criteria
IV.2.2)Information about electronic auction
IV.3.1)File reference number attributed by the contracting authority:
IV.3.2)Previous publication(s) concerning the same contract
IV.3.3)Conditions for obtaining specifications and additional documents or descriptive document
IV.3.4)Time limit for receipt of tenders or requests to participate
IV.3.6)Language(s) in which tenders or requests to participate may be drawn up
IV.3.7)Minimum time frame during which the tenderer must maintain the tender
IV.3.8)Conditions for opening of tenders
Section VI: Complementary information
VI.1)Information about recurrence
VI.2)Information about European Union funds
VI.3)Additional information
VI.5)Date of dispatch of this notice: