MOD Engineering Training Framework

MOD Engineering Training Framework

A Framework to meet DE&S engineering training requirement.

United Kingdom-Bristol: Education and training services

2019/S 095-229800

Contract notice

Services

Legal Basis:

Directive 2014/24/EU

Section I: Contracting authority

I.1)Name and addresses

Ministry of Defence, Corporate Commercial
MOD Abbey Wood (South), NH1 #1261 | Spruce 2B
Bristol
BS34 8JH
United Kingdom
Contact person: Corporate Commercial Team
Telephone: +44 3067962477
E-mail: DESTECH-Comrcl-TEAM@mod.gov.uk
NUTS code: UKK11

Internet address(es):Main address: www.ministryofdefence.com

I.2)Information about joint procurement

I.3)Communication

Access to the procurement documents is restricted. Further information can be obtained at: www.ministryofdefence,com
Additional information can be obtained from the abovementioned address
Tenders or requests to participate must be submitted to the abovementioned address

I.4)Type of the contracting authority

Ministry or any other national or federal authority, including their regional or local subdivisions

I.5)Main activity

Defence

Section II: Object

II.1)Scope of the procurement

II.1.1)Title:

Engineering Training Framework

Reference number: CCDT/589

II.1.2)Main CPV code

80000000

II.1.3)Type of contract

Services

II.1.4)Short description:

A framework to meet DE&S engineering training requirement. The framework has 3 lots (further education professional courses and specialist engineering courses). This will be a 3-year contract with the option to extend for a year. The estimated value is 790 000 GBP (ex vat) over 3 years.

II.1.5)Estimated total value

Value excluding VAT: 790 000.00 GBP

II.1.6)Information about lots

This contract is divided into lots: yes
Tenders may be submitted for all lots
The contracting authority reserves the right to award contracts combining the following lots or groups of lots:

Bidders should bid against individual courses and there will be one preferred supplier per course rather than per lot.

II.2)Description

II.2.1)Title:

Further Education

Lot No: 1

II.2.2)Additional CPV code(s)

80430000

II.2.3)Place of performance

NUTS code: UKK11
Main site or place of performance:

Bristol, City of.

II.2.4)Description of the procurement:

Lot 1 is a requirement for further education. Please see the courses below:

Lot 1: Further Education

— mechanical engineering BEng,

— mechanical engineering MEng,

— electrical and electric engineering BEng,

— electrical and electric engineering Meng,

— computer science BEng,

— computer science MEng,

— robotics BEng,

— robotics Meng,

— aerospace engineering BEng,

— aerospace engineering Meng,

— electrical engineering BEng,

— electrical engineering MEng,

— mechanical engineering HNC,

— certificate in naval architecture.

II.2.5)Award criteria

Price is not the only award criterion and all criteria are stated only in the procurement documents

II.2.6)Estimated value

Value excluding VAT: 556.00 GBP

II.2.7)Duration of the contract, framework agreement or dynamic purchasing system

Duration in months: 36
This contract is subject to renewal: no

II.2.10)Information about variants

Variants will be accepted: no

II.2.11)Information about options

Options: yes
Description of options:

1 option year.

II.2.12)Information about electronic catalogues

II.2.13)Information about European Union funds

The procurement is related to a project and/or programme financed by European Union funds: no
II.2.14)Additional information
II.2)Description

II.2.1)Title:

Professional Courses

Lot No: 2

II.2.2)Additional CPV code(s)

80500000

II.2.3)Place of performance

NUTS code: UKK11
Main site or place of performance:

Bristol, City of.

II.2.4)Description of the procurement:

For the following courses:

Lot 2: Professional Courses

— ISO 45001 lead auditor training,

— ISO 14001 2015 lead auditor training,

— ISO9001 2015 lead auditor training,

— AS9100 lead auditor training.

II.2.5)Award criteria

Price is not the only award criterion and all criteria are stated only in the procurement documents

II.2.6)Estimated value

Value excluding VAT: 152.00 GBP

II.2.7)Duration of the contract, framework agreement or dynamic purchasing system

Duration in months: 36
This contract is subject to renewal: no

II.2.10)Information about variants

Variants will be accepted: no

II.2.11)Information about options

Options: yes
Description of options:

1 option year.

II.2.12)Information about electronic catalogues

II.2.13)Information about European Union funds

The procurement is related to a project and/or programme financed by European Union funds: no
II.2.14)Additional information
II.2)Description

II.2.1)Title:

Specialist Engineering Courses

Lot No: 3

II.2.2)Additional CPV code(s)

80510000

II.2.3)Place of performance

NUTS code: UKK11
Main site or place of performance:

Bristol, City of.

II.2.4)Description of the procurement:

For the following courses:

Lot 3: Specialist Engineering Courses

— liquid penetration testing L1,

— liquid penetration testing L2,

— basic dry dock training.

II.2.5)Award criteria

Price is not the only award criterion and all criteria are stated only in the procurement documents

II.2.6)Estimated value

Value excluding VAT: 82.00 GBP

II.2.7)Duration of the contract, framework agreement or dynamic purchasing system

Duration in months: 36
This contract is subject to renewal: no

II.2.10)Information about variants

Variants will be accepted: no

II.2.11)Information about options

Options: yes
Description of options:

1 option year..

II.2.12)Information about electronic catalogues

II.2.13)Information about European Union funds

The procurement is related to a project and/or programme financed by European Union funds: no
II.2.14)Additional information

Section III: Legal, economic, financial and technical information

III.1)Conditions for participation

III.1.1)Suitability to pursue the professional activity, including requirements relating to enrolment on professional or trade registers

List and brief description of conditions:

Contained within ITT documentation.

III.1.2)Economic and financial standing

Selection criteria as stated in the procurement documents

III.1.3)Technical and professional ability

Selection criteria as stated in the procurement documents
III.1.5)Information about reserved contracts
III.2)Conditions related to the contract
III.2.1)Information about a particular profession

III.2.2)Contract performance conditions:

See ITT documentation.

III.2.3)Information about staff responsible for the performance of the contract

Obligation to indicate the names and professional qualifications of the staff assigned to performing the contract

Section IV: Procedure

IV.1)Description

IV.1.1)Type of procedure

Open procedure

IV.1.3)Information about a framework agreement or a dynamic purchasing system

The procurement involves the establishment of a framework agreement
Framework agreement with several operators
IV.1.4)Information about reduction of the number of solutions or tenders during negotiation or dialogue
IV.1.6)Information about electronic auction

IV.1.8)Information about the Government Procurement Agreement (GPA)

The procurement is covered by the Government Procurement Agreement: yes
IV.2)Administrative information
IV.2.1)Previous publication concerning this procedure

IV.2.2)Time limit for receipt of tenders or requests to participate

Date: 02/07/2019
Local time: 10:00
IV.2.3)Estimated date of dispatch of invitations to tender or to participate to selected candidates

IV.2.4)Languages in which tenders or requests to participate may be submitted:

English

IV.2.6)Minimum time frame during which the tenderer must maintain the tender

Duration in months: 3 (from the date stated for receipt of tender)

IV.2.7)Conditions for opening of tenders

Date: 02/07/2019
Local time: 10:00
Information about authorised persons and opening procedure:

To be submitted via DE&S Tender Board in accordance with DEFFORM 48 (Tender Label).

Section VI: Complementary information

VI.1)Information about recurrence

This is a recurrent procurement: no

VI.2)Information about electronic workflows

Electronic ordering will be used
Electronic invoicing will be accepted
Electronic payment will be used

VI.3)Additional information:

The Contracting Authority considers that this contract may be suitable for economic operators that are Small or Medium Enterprises (SMEs). However, any selection of tenderers will be based solely on the criteria set out for the procurement.The Authority reserves the right to amend any condition related to security of information to reflect any changes in national law or government policy. If any contract documents are accompanied by instructions on safeguarding classified information (e.g. a security aspects letter), the Authority reserves the right to amend the terms of these instructions to reflect any changes in national law or government policy, whether in respect of the applicable protective marking scheme, specific protective markings given, the aspects to which any protective marking applies, or otherwise. The link below to the Gov.uk website provides information on the Government Security Classification.

https://www.gov.uk/government/publications/government-security-classifications

Advertising Regime OJEU: this contract opportunity is published in the Official Journal of the European Union (OJEU) the MoD Defence Contracts Bulletin and www.contracts.mod.uk GO Reference: GO-2019514-DCB-14892363

VI.4)Procedures for review

VI.4.1)Review body

Ministry of Defence, Agencies/Misc, Other
MOD Abbey Wood (South), NH1 #1261 | Spruce 2B
Bristol
BS34 8JH
United Kingdom
Telephone: +44 3067962477
E-mail: DESTECH-Comrcl-TEAM@mod.gov.uk

VI.4.2)Body responsible for mediation procedures

Ministry of Defence, Agencies/Misc, Other
Bristol
United Kingdom
VI.4.3)Review procedure
VI.4.4)Service from which information about the review procedure may be obtained

VI.5)Date of dispatch of this notice:

14/05/2019