Provision of of a Multi-Protocol Label Switching Connectivity Service
Corporation of Trinity House.
United Kingdom-London: Internet services
2014/S 070-120129
Contract notice
Supplies
Directive 2004/18/EC
Section I: Contracting authority
I.1)Name, addresses and contact point(s)
The Corporation of Trinity House
Trinity Square, Tower Hill
For the attention of: Beth Davis
EC3N 4DH London
UNITED KINGDOM
Telephone: +44 1255245112
E-mail: etender@trinityhouse.co.uk
Fax: +44 1255241258
Internet address(es):
General address of the contracting authority: www.trinityhouse.co.uk
Address of the buyer profile: http://trinityhouse.g2b.info/
Further information can be obtained from: The above mentioned contact point(s)
Specifications and additional documents (including documents for competitive dialogue and a dynamic purchasing system) can be obtained from: The above mentioned contact point(s)
Tenders or requests to participate must be sent to: The above mentioned contact point(s)
I.2)Type of the contracting authority
Body governed by public law
I.3)Main activity
Other: Maritime Navigation
I.4)Contract award on behalf of other contracting authorities
The contracting authority is purchasing on behalf of other contracting authorities: no
Section II: Object of the contract
II.1)Description
II.1.1)Title attributed to the contract by the contracting authority:
T0248 – Provision of of a Multi-Protocol Label Switching (MPLS) Connectivity Service.
II.1.2)Type of contract and location of works, place of delivery or of performance
Supplies
Purchase
NUTS code
Purchase
NUTS code
II.1.3)Information about a public contract, a framework agreement or a dynamic purchasing system (DPS)
The notice involves a public contract
II.1.4)Information on framework agreement
II.1.5)Short description of the contract or purchase(s)
Internet services. Provision of a Multi-Protocol Label Switching (MPLS) Connectivity Service.
II.1.6)Common procurement vocabulary (CPV)
72400000
II.1.7)Information about Government Procurement Agreement (GPA)
The contract is covered by the Government Procurement Agreement (GPA): no
II.1.8)Lots
This contract is divided into lots: no
II.1.9)Information about variants
Variants will be accepted: no
II.2)Quantity or scope of the contract
II.2.1)Total quantity or scope:
Estimated value excluding VAT:
Range: between 100 000 and 500 000 GBP
Range: between 100 000 and 500 000 GBP
II.2.2)Information about options
Options: no
II.2.3)Information about renewals
This contract is subject to renewal: no
II.3)Duration of the contract or time limit for completion
Duration in months: 36 (from the award of the contract)
Section III: Legal, economic, financial and technical information
III.1)Conditions relating to the contract
III.1.1)Deposits and guarantees required:
III.1.2)Main financing conditions and payment arrangements and/or reference to the relevant provisions governing them:
III.1.3)Legal form to be taken by the group of economic operators to whom the contract is to be awarded:
III.1.4)Other particular conditions
The performance of the contract is subject to particular conditions: no
III.2)Conditions for participation
III.2.1)Personal situation of economic operators, including requirements relating to enrolment on professional or trade registers
III.2.2)Economic and financial ability
Information and formalities necessary for evaluating if the requirements are met: (a) Appropriate statements from banks or, where appropriate, evidence of relevant professional risk indemnity insurance
(b) The presentation of balance-sheets or extracts from the balance-sheets, where publication of the balance-sheet is required under the law of the country in which the economic operator is established
(c) A statement of the undertaking’s overall turnover and, where appropriate, of turnover in the area covered by the contract for a maximum of the last 3 financial years available, depending on the date on which the undertaking was set up or the economic operator started trading, as far as the information on these turnovers is available
(b) The presentation of balance-sheets or extracts from the balance-sheets, where publication of the balance-sheet is required under the law of the country in which the economic operator is established
(c) A statement of the undertaking’s overall turnover and, where appropriate, of turnover in the area covered by the contract for a maximum of the last 3 financial years available, depending on the date on which the undertaking was set up or the economic operator started trading, as far as the information on these turnovers is available
III.2.3)Technical capacity
Information and formalities necessary for evaluating if the requirements are met:
(a) a list of the works carried out over the past 5 years, accompanied by certificates of satisfactory execution for the most important works. These certificates shall indicate the value, date and site of the works and shall specify whether they were carried out according to the rules of the trade and properly completed. Where appropriate, the competent authority shall submit these certificates to the contracting authority direct
(b) a list of the principal deliveries effected or the main services provided in the past 3 years, with the sums, dates and recipients, whether public or private, involved. Evidence of delivery and services provided shall be given: – where the recipient was a contracting authority, in the form of certificates issued or countersigned by the competent authority, – where the recipient was a private purchaser, by the purchaser’s certification or, failing this, simply by a declaration by the economic operator
(c) an indication of the technicians or technical bodies involved, whether or not belonging directly to the economic operator’s undertaking, especially those responsible for quality control and, in the case of public works contracts, those upon whom the contractor can call in order to carry out the work
(d) A description of the technical facilities and measures used by the supplier or service provider for ensuring quality and the undertaking’s study and research facilities
(e) Where the products or services to be supplied are complex or, exceptionally, are required for a special purpose, a check carried out by the contracting authorities or on their behalf by a competent official body of the country in which the supplier or service provider is established, subject to that body’s agreement, on the production capacities of the supplier or the technical capacity of the service provider and, if necessary, on the means of study and research which are available to it and the quality control measures it will operate
(f) The educational and professional qualifications of the service provider or contractor and/or those of the undertaking’s managerial staff and, in particular, those of the person or persons responsible for providing the services or managing the work
(g) For public works contracts and public services contracts, and only in appropriate cases, an indication of the environmental management measures that the economic operator will be able to apply when performing the contract
(h) A statement of the average annual manpower of the service provider or contractor and the number of managerial staff for the last three years
(i) A statement of the tools, plant or technical equipment available to the service provider or contractor for carrying out the contract
(j) An indication of the proportion of the contract which the services provider intends possibly to subcontract
(k) With regard to the products to be supplied: (i) samples, descriptions and/or photographs, the authenticity of which must be certified if the contracting authority so requests; (ii) certificates drawn up by official quality control institutes or agencies of recognised competence attesting the conformity of products clearly identified by references to specifications or standards
(a) a list of the works carried out over the past 5 years, accompanied by certificates of satisfactory execution for the most important works. These certificates shall indicate the value, date and site of the works and shall specify whether they were carried out according to the rules of the trade and properly completed. Where appropriate, the competent authority shall submit these certificates to the contracting authority direct
(b) a list of the principal deliveries effected or the main services provided in the past 3 years, with the sums, dates and recipients, whether public or private, involved. Evidence of delivery and services provided shall be given: – where the recipient was a contracting authority, in the form of certificates issued or countersigned by the competent authority, – where the recipient was a private purchaser, by the purchaser’s certification or, failing this, simply by a declaration by the economic operator
(c) an indication of the technicians or technical bodies involved, whether or not belonging directly to the economic operator’s undertaking, especially those responsible for quality control and, in the case of public works contracts, those upon whom the contractor can call in order to carry out the work
(d) A description of the technical facilities and measures used by the supplier or service provider for ensuring quality and the undertaking’s study and research facilities
(e) Where the products or services to be supplied are complex or, exceptionally, are required for a special purpose, a check carried out by the contracting authorities or on their behalf by a competent official body of the country in which the supplier or service provider is established, subject to that body’s agreement, on the production capacities of the supplier or the technical capacity of the service provider and, if necessary, on the means of study and research which are available to it and the quality control measures it will operate
(f) The educational and professional qualifications of the service provider or contractor and/or those of the undertaking’s managerial staff and, in particular, those of the person or persons responsible for providing the services or managing the work
(g) For public works contracts and public services contracts, and only in appropriate cases, an indication of the environmental management measures that the economic operator will be able to apply when performing the contract
(h) A statement of the average annual manpower of the service provider or contractor and the number of managerial staff for the last three years
(i) A statement of the tools, plant or technical equipment available to the service provider or contractor for carrying out the contract
(j) An indication of the proportion of the contract which the services provider intends possibly to subcontract
(k) With regard to the products to be supplied: (i) samples, descriptions and/or photographs, the authenticity of which must be certified if the contracting authority so requests; (ii) certificates drawn up by official quality control institutes or agencies of recognised competence attesting the conformity of products clearly identified by references to specifications or standards
III.2.4)Information about reserved contracts
III.3)Conditions specific to services contracts
III.3.1)Information about a particular profession
III.3.2)Staff responsible for the execution of the service
Section IV: Procedure
IV.1)Type of procedure
IV.1.1)Type of procedure
Open
IV.1.2)Limitations on the number of operators who will be invited to tender or to participate
IV.1.3)Reduction of the number of operators during the negotiation or dialogue
IV.2)Award criteria
IV.2.1)Award criteria
The most economically advantageous tender in terms of the criteria stated in the specifications, in the invitation to tender or to negotiate or in the descriptive document
IV.2.2)Information about electronic auction
An electronic auction will be used: no
IV.3)Administrative information
IV.3.1)File reference number attributed by the contracting authority:
T0248 – Provision of a Multi-Protocol Label Switching (MPLS) Connectivity Service
IV.3.2)Previous publication(s) concerning the same contract
Notice on a buyer profile
Notice number in the OJEU: 2014/S 39-064096 of 25.2.2014
IV.3.3)Conditions for obtaining specifications and additional documents or descriptive document
Time limit for receipt of requests for documents or for accessing documents: 1.5.2014 – 12:00
Payable documents: no
Payable documents: no
IV.3.4)Time limit for receipt of tenders or requests to participate
6.5.2014 – 12:00
IV.3.5)Date of dispatch of invitations to tender or to participate to selected candidates
IV.3.6)Language(s) in which tenders or requests to participate may be drawn up
English.
IV.3.7)Minimum time frame during which the tenderer must maintain the tender
until: 1.10.2014
IV.3.8)Conditions for opening of tenders
Date: 7.5.2014 – 10:00
Place:
Place:
PIM Office, Harwich.
Persons authorised to be present at the opening of tenders: no
Section VI: Complementary information
VI.1)Information about recurrence
This is a recurrent procurement: no
VI.2)Information about European Union funds
The contract is related to a project and/or programme financed by European Union funds: no
VI.3)Additional information
To view this notice, please click here:
https://www.delta-esourcing.com/delta/viewNotice.html?noticeId=94811178
https://www.delta-esourcing.com/delta/viewNotice.html?noticeId=94811178
GO Reference: GO-201444-PRO-5581825
VI.4)Procedures for appeal
VI.4.1)Body responsible for appeal procedures
The Corporation of Trinity House
The Quay
CO12 3JW Harwich
UNITED KINGDOM
E-mail: etender@trinityhouse.co.uk
Telephone: +44 1255245112
Internet address: www.trinityhouse.co.uk
VI.4.2)Lodging of appeals
VI.4.3)Service from which information about the lodging of appeals may be obtained
VI.5)Date of dispatch of this notice:4.4.2014