Purchase of a 3D Printer – Ministry of Defence

Purchase of a 3D Printer – Ministry of Defence

Purchase of a 3D Printer Capable of Fused Deposition Modelling (FDM) 3D Printer and Soluble Support Removal Tank.

United Kingdom-Wolverhampton: Digital printing services

2020/S 144-355989

Contract notice

Services

Legal Basis:

Directive 2014/24/EU

Section I: Contracting authority

I.1)Name and addresses

Official name: Ministry of Defence, C&C, C&C
Postal address: RAF Cosford, Flowerdown Hall S104
Town: Wolverhampton
NUTS code: UKG2 Shropshire and Staffordshire
Postal code: WV7 3EX
Country: United Kingdom
Contact person: Andrew Trinick
E-mail: andrew.trinick668@mod.gov.uk
Telephone: +44 3001513859

Internet address(es):Main address: www.contracts.mod.uk

I.2)Information about joint procurement

The contract is awarded by a central purchasing body

I.3)Communication

The procurement documents are available for unrestricted and full direct access, free of charge, at: WWW.Contracts.mod.uk
Additional information can be obtained from the abovementioned address
Tenders or requests to participate must be submitted to the abovementioned address

I.4)Type of the contracting authority

Ministry or any other national or federal authority, including their regional or local subdivisions

I.5)Main activity

Defence

Section II: Object

II.1)Scope of the procurement

II.1.1)Title:

Purchase of a 3D Printer Capable of Fused Deposition Modelling (FDM) 3D Printer and Soluble Support Removal Tank

Reference number: 700892368

II.1.2)Main CPV code

79811000 Digital printing services

II.1.3)Type of contract

Services

II.1.4)Short description:

Purchase of a 3D Printer Capable of Fused Deposition Modelling (FDM) 3D Printer and soluble support removal tank.

II.1.5)Estimated total value

Value excluding VAT: 200 000.00 GBP

II.1.6)Information about lots

This contract is divided into lots: no
II.2)Description
II.2.1)Title:

II.2.2)Additional CPV code(s)

72242000 Design-modelling services
79930000 Specialty design services
42962000 Printing and graphics equipment

II.2.3)Place of performance

NUTS code: UKH11 Peterborough
Main site or place of performance:

Peterborough.

II.2.4)Description of the procurement:

Purchase of a 3D Printer capable of Fused Deposition Modelling (FDM) 3D printer and soluble support removal tank.

Suppliers must read through this set of instructions and follow the process to respond to this opportunity.

The information and/or documents for this opportunity are available on https://www.contracts.mod.uk/delta. You must register on this site to respond, if you are already registered you will not need to register again, simply use your existing username and password. Please note there is a password reminder link on the homepage.

Suppliers must log in, go to your response manager and add the following access code: J895327A4V. Please ensure you follow any instruction provided to you here.

The deadline for submitting your response(s) is 25 August 2020 18.00. Please ensure that you allow yourself plenty of time when responding to this invite prior to the closing date and time, especially if you have been asked to upload documents.

If you experience any difficulties please refer to the online frequently asked questions (FAQ’s) or the user guides or contact the MOD DCO Helpdesk by emailing: support@contracts.mod.uk or call 0800 282 324.

II.2.5)Award criteria

Price is not the only award criterion and all criteria are stated only in the procurement documents

II.2.6)Estimated value

Value excluding VAT: 200 000.00 GBP

II.2.7)Duration of the contract, framework agreement or dynamic purchasing system

Duration in months: 60
This contract is subject to renewal: no

II.2.9)Information about the limits on the number of candidates to be invited

Envisaged minimum number: 2
Maximum number: 8
Objective criteria for choosing the limited number of candidates:

To create a suitable competition whilst limiting the number of technically compliant bidders.

II.2.10)Information about variants

Variants will be accepted: no

II.2.11)Information about options

Options: no
II.2.12)Information about electronic catalogues

II.2.13)Information about European Union funds

The procurement is related to a project and/or programme financed by European Union funds: no
II.2.14)Additional information

Section III: Legal, economic, financial and technical information

III.1)Conditions for participation

III.1.1)Suitability to pursue the professional activity, including requirements relating to enrolment on professional or trade registers

List and brief description of conditions:

Must be operating in the field of 3D printing design and delivery, demonstration of competence will be sought within PQQ and at ITT stages.

III.1.2)Economic and financial standing

Selection criteria as stated in the procurement documents

III.1.3)Technical and professional ability

Selection criteria as stated in the procurement documents
III.1.5)Information about reserved contracts
III.2)Conditions related to the contract
III.2.1)Information about a particular profession

III.2.2)Contract performance conditions:

As per the tender documents.

III.2.3)Information about staff responsible for the performance of the contract

Section IV: Procedure

IV.1)Description

IV.1.1)Type of procedure

Restricted procedure
IV.1.3)Information about a framework agreement or a dynamic purchasing system
IV.1.4)Information about reduction of the number of solutions or tenders during negotiation or dialogue
IV.1.6)Information about electronic auction

IV.1.8)Information about the Government Procurement Agreement (GPA)

The procurement is covered by the Government Procurement Agreement: yes
IV.2)Administrative information
IV.2.1)Previous publication concerning this procedure

IV.2.2)Time limit for receipt of tenders or requests to participate

Date: 25/08/2020
Local time: 12:00

IV.2.3)Estimated date of dispatch of invitations to tender or to participate to selected candidates

Date: 31/08/2020

IV.2.4)Languages in which tenders or requests to participate may be submitted:

English

IV.2.6)Minimum time frame during which the tenderer must maintain the tender

Duration in months: 3 (from the date stated for receipt of tender)
IV.2.7)Conditions for opening of tenders

Section VI: Complementary information

VI.1)Information about recurrence

This is a recurrent procurement: no

VI.2)Information about electronic workflows

Electronic payment will be used

VI.3)Additional information:

The contracting authority considers that this contract may be suitable for economic operators that are small or medium enterprises (SMEs). However, any selection of tenderers will be based solely on the criteria set out for the procurement.The authority reserves the right to amend any condition related to security of information to reflect any changes in national law or government policy. If any contract documents are accompanied by instructions on safeguarding classified information (e.g. a Security Aspects Letter), the authority reserves the right to amend the terms of these instructions to reflect any changes in national law or government policy, whether in respect of the applicable protective marking scheme, specific protective markings given, the aspects to which any protective marking applies, or otherwise. The link below to the Gov.uk website provides information on the Government Security Classification.

https://www.gov.uk/government/publications/government-security-classifications

Advertising Regime OJEU: this contract opportunity is published in the Official Journal of the European Union (OJEU), the MoD Defence Contracts Bulletin and www.contracts.mod.uk Go reference: GO-2020725-DCB-16880936

VI.4)Procedures for review

VI.4.1)Review body

Official name: Ministry of Defence, C&C, C&C
Town: Wolverhampton
Postal code: WV7 3EX
Country: United Kingdom
E-mail: andrew.trinick668@mod.gov.uk
Telephone: +44 3001513859

VI.4.2)Body responsible for mediation procedures

Official name: Ministry of Defence, C&C, C&C
Town: Wolverhampton
Country: United Kingdom
E-mail: andrew.trinick668@mod.gov.uk
Telephone: +44 3001513859
VI.4.3)Review procedure

VI.4.4)Service from which information about the review procedure may be obtained

Official name: Ministry of Defence, C&C, C&C
Town: Wolverhampton
Country: United Kingdom
E-mail: andrew.trinick668@mod.gov.uk
Telephone: +44 3001513859

VI.5)Date of dispatch of this notice:

25/07/2020