Reactive Engineering Support of Steering and Stabiliser Control Systems for HM Ships

Reactive Engineering Support of Steering and Stabiliser Control Systems for HM Ships

The authority are considering placing a seven year enabling arrangement to support RN Surface Ship Steering and Stabilisation Control systems. The enabling arrangement will require the manufacture of new spares, the repair of existing hardware, service engineer support for fault-finding onboard Ships and Post Design Services for Autopilots.

United Kingdom-Bristol: Marine equipment

2014/S 053-088352

Contract notice

Supplies

Directive 2009/81/EC

Section I: Contracting authority/entity

I.1)Name, addresses and contact point(s)

MOD
Abbey Wood
BS34 8JH Bristol
UNITED KINGDOM
Telephone: +44 3067932261

Further information can be obtained from: The above mentioned contact point(s)

Specifications and additional documents (including documents for competitive dialogue and a dynamic purchasing system) can be obtained from: The above mentioned contact point(s)

Tenders or requests to participate must be sent to: The above mentioned contact point(s)

I.2)Type of the contracting authority
I.3)Main activity

Defence
I.4)Contract award on behalf of other contracting authorities/entities

The contracting authority is purchasing on behalf of other contracting authorities: no

Section II: Object of the contract

II.1)Description
II.1.1)Title attributed to the contract by the contracting authority:

Supply,Repair,PDS and Reactive Engineering Support of Steering and Stabiliser Control Systems for HM Ships.
II.1.2)Type of contract and location of works, place of delivery or of performance

Supplies
Purchase
NUTS code UKK1

II.1.3)Information on framework agreement
II.1.4)Information on framework agreement
II.1.5)Short description of the contract or purchase(s):

Marine equipment. The authority are considering placing a seven year enabling arrangement to support RN Surface Ship Steering and Stabilisation Control systems. The enabling arrangement will require the manufacture of new spares, the repair of existing hardware, service engineer support for fault-finding onboard Ships and Post Design Services for Autopilots, Hand Steering Units, Rudder Servo Amplifiers, Changeover Switches, Feedback Units and Stabiliser Central Control units and Servo Amplifiers. The control systems covered by the arrangement will include; T23 Steering and Stabilisers, LPH Steering and Stabilisers, and MCMV, LPD & HMS SCOTT Steering.
II.1.6)Common procurement vocabulary (CPV)

34930000

II.1.7)Information about subcontracting

The tenderer has to indicate in the tender any share of the contract it may intend to subcontract to third parties and any proposed subcontractor, as well as the subject-matter of the subcontracts for which they are proposed
The tenderer has to indicate any change occurring at the level of subcontractors during the execution of the contract
II.1.8)Lots

This contract is divided into lots: no
II.1.9)Information about variants

Variants will be accepted: no
II.2)Quantity or scope of the contract
II.2.1)Total quantity or scope:

Estimated value excluding VAT: 1 000 000 GBP
II.2.2)Information about options

Options: no
II.2.3)Information about renewals

This contract is subject to renewal: no
II.3)Duration of the contract or time limit for completion

Duration in months: 84 (from the award of the contract)

Section III: Legal, economic, financial and technical information

III.1)Conditions relating to the contract
III.1.1)Deposits and guarantees required:
III.1.2)Main financing conditions and payment arrangements and/or reference to the relevant provisions governing them:
III.1.3)Legal form to be taken by the group of economic operators to whom the contract is to be awarded:
III.1.4)Other particular conditions to which the performance of the contract is subject, in particular with regard to security of supply and security of information:
III.1.5)Information about security clearance:
III.2)Conditions for participation
III.2.1)Personal situation

Criteria regarding the personal situation of economic operators (that may lead to their exclusion) including requirements relating to enrolment on professional or trade registers

Information and formalities necessary for evaluating if the requirements are met: The Authority will apply all the offences listed in Article 39(1) of Directive 2009/81/EC (implemented as Regulation 23(1) of the Defence and Security Public Contract Regulations (DSPCR) 2011 in the UK) and all of the professional misconducts listed at Article 39(2) of Directive 2009/81/EC (see also Regulation 23(2) in the DSPCR 2011) to the decision of whether a Candidate is eligible to be invited to tender.
A full list of the Regulation 23(1) and 23(2) criteria are at http://www.contracts.mod.uk/delta/project/reasonsForExclusion.html#dspr

Candidates will be required to sign a declaration confirming whether they do or do not have any of the listed criteria as part of the pre-qualification process.
Candidates who have been convicted of any of the offences under Article 39(1) are ineligible and will not be selected to bid, unless there are overriding requirements in the general interest (including defence and security factors) for doing so.
Candidates who are guilty of any of the offences, circumstances or misconduct under Article 39(2) may be excluded from being selected to bid at the discretion of the Authority.

III.2.2)Economic and financial ability
III.2.3)Technical and/or professional capacity
III.2.4)Information about reserved contracts
III.3)Conditions specific to services contracts
III.3.1)Information about a particular profession
III.3.2)Staff responsible for the execution of the service

Section IV: Procedure

IV.1)Type of procedure
IV.1.1)Type of procedure

Restricted
IV.1.2)Limitations on the number of operators who will be invited to tender or to participate

Envisaged minimum number 3 and maximum number 6
Objective criteria for choosing the limited number of candidates: Suppliers must read through this set of instructions and follow the process to respond to this opportunity.
The information and/or documents for this opportunity are available on http://www.contracts.mod.uk/delta. You must register on this site to respond, if you are already registered you will not need to register again, simply use your existing username and password. Please note there is a password reminder link on the homepage.

Suppliers must log in, go to your Response Manager and add the following Access Code: 3ED67GY89S. Please ensure you follow any instruction provided to you here.
The deadline for submitting your response(s) is 25.4.2014 17:00. Please ensure that you allow yourself plenty of time when responding to this invite prior to the closing date and time, especially if you have been asked to upload documents.
If you experience any difficulties please refer to the online Frequently Asked Questions (FAQ’s) or the User Guides or contact the MOD DCO Helpdesk by emailing – support@contracts.mod.uk or call +44 8452707099.

IV.1.3)Reduction of the number of operators during the negotiation or dialogue
IV.2)Award criteria
IV.2.1)Award criteria

The most economically advantageous tender in terms of the criteria stated in the specifications, in the invitation to tender or to negotiate or in the descriptive document
IV.2.2)Information about electronic auction

An electronic auction has been used: yes
Additional information about electronic auction: Yes. A Reverse Auction, conducted using electronic means, may be used as part of the procurement process for this requirement. Specific relevant information on Reverse Auction usage will be given in the Invitation to Tender.
IV.3)Administrative information
IV.3.1)File reference number attributed by the contracting authority:

MES/21234
IV.3.2)Previous publication(s) concerning the same contract

no
IV.3.3)Conditions for obtaining specifications and additional documents or descriptive document

Payable documents: no
IV.3.4)Time limit for receipt of tenders or requests to participate

25.4.2014 – 17:00
IV.3.5)Date of dispatch of invitations to tender or to participate to selected candidates
IV.3.6)Language(s) in which tenders or requests to participate may be drawn up

English.

Section VI: Complementary information

VI.1)Information about recurrence

This is a recurrent procurement: no
VI.2)Information about European Union funds

The contract is related to a project and/or programme financed by European Union funds: no
VI.3)Additional information:

The contracting authority considers that this contract may be suitable for economic operators that are small or medium enterprises (SMEs). However, any selection of tenderers will be based solely on the criteria set out for the procurement, and the contract will be awarded on the basis of the most economically advantageous tender.Suppliers interested in working with the Ministry of Defence should register on the MOD Supplier Information Database (SID) Register, available at www.contracts.mod.uk. The MOD SID is a database of active and potential suppliers available to all MOD and UK Defence procurement personnel, and is the main supplier database of MOD Procurement organisations. Please note: the registration and publication of a company profile on the MOD SID does not mean or imply that the supplier has in any way been vetted or approved by the MOD. Suppliers wishing to compete for advertised MOD contracts must respond to any specific call for competition by submitting a separate expression of interest in accordance with the instructions of the purchasing organisation.

Advertising Regime OJEU:- This contract opportunity is published in the Official Journal of the European Union (OJEU), the MoD Defence Contracts Bulletin and www.contracts.mod.uk

Suppliers must read through this set of instructions and follow the process to respond to this opportunity.
The information and/or documents for this opportunity are available on http://www.contracts.mod.uk.

You must register on this site to respond, if you are already registered you will not need to register again, simply use your existing username and password. Please note there is a password reminder link on the homepage.
Suppliers must log in, go to your Response Manager and add the following Access Code: X6349NAN7F.
Please ensure you follow any instruction provided to you here.
The deadline for submitting your response(s) is detailed within this contract notice, you will also have visibility of the deadline date, once you have added the Access code via DCO as the opening and closing date is visible within the opportunity.
Please ensure that you allow yourself plenty of time when responding to this opportunity prior to the closing date and time, especially if you have been asked to upload documents.
If you experience any difficulties please refer to the online Frequently Asked Questions (FAQ’s) or the User Guides or contact the MOD DCO Helpdesk by emailing support@contracts.mod.uk or Telephone +44 8452707099.

GO Reference: GO-2014311-DCB-5519833

VI.4)Procedures for appeal
VI.4.1)Body responsible for appeal procedures
VI.4.2)Lodging of appeals
VI.4.3)Service from which information about the lodging of appeals may be obtained

VI.5)Date of dispatch of this notice:11.3.2014