Repair and Maintenance of Aircraft Engines for MOD

Repair and Maintenance of Aircraft Engines for MOD

Provision of Engine Services for the RAF BAE 146 Aircraft.

United Kingdom-Bristol: Repair and maintenance services of aircraft engines

2014/S 174-307868

Contract notice

Services

Directive 2004/18/EC

Section I: Contracting authority

I.1)Name, addresses and contact point(s)

Ministry of Defence, Air Support
Defence Equipment and Support, C17 CSAE Project Team, Walnut Level 2, #1232
Contact point(s): DES C17 CSAE-CM1
For the attention of: Hywel Willmot
BS34 8JH Bristol
UNITED KINGDOM
Telephone: +44 3067986333
E-mail: desc17csae-cm1@mod.uk

Further information can be obtained from: The above mentioned contact point(s)

Specifications and additional documents (including documents for competitive dialogue and a dynamic purchasing system) can be obtained from: The above mentioned contact point(s)

Tenders or requests to participate must be sent to: The above mentioned contact point(s)

I.2)Type of the contracting authority

Ministry or any other national or federal authority, including their regional or local sub-divisions

I.3)Main activity

Defence

I.4)Contract award on behalf of other contracting authorities

The contracting authority is purchasing on behalf of other contracting authorities: no

Section II: Object of the contract

II.1)Description

II.1.1)Title attributed to the contract by the contracting authority:

Provision of Engine Services for the RAF BAE 146 Aircraft.

II.1.2)Type of contract and location of works, place of delivery or of performance

Services
Service category No 1: Maintenance and repair services

NUTS code UKI23

II.1.3)Information about a public contract, a framework agreement or a dynamic purchasing system (DPS)

The notice involves the establishment of a framework agreement

II.1.4)Information on framework agreement

Framework agreement with a single operator

Duration of the framework agreement

Duration in years: 4

Estimated total value of purchases for the entire duration of the framework agreement

Estimated value excluding VAT:
Range: between 7 000 000 and 10 000 000 GBP

II.1.5)Short description of the contract or purchase(s)

Repair and maintenance services of aircraft engines. Aircraft-engine repair services. Reconditioning services of aircraft engines. Aircraft engines. Parts for aircraft engines. Framework Agreement for the Provision of Maintenance and Repair Services for the Honeywell ALF502R-5 Engine.

II.1.6)Common procurement vocabulary (CPV)

5021121050211212502113103473110034731500

II.1.7)Information about Government Procurement Agreement (GPA)

The contract is covered by the Government Procurement Agreement (GPA): yes

II.1.8)Lots

This contract is divided into lots: no

II.1.9)Information about variants

Variants will be accepted: no
II.2)Quantity or scope of the contract

II.2.1)Total quantity or scope:

Provision of Maintenance and Repair Services for the Honeywell ALF502R-5 Engine utilised by the RAF BAE146 Aircraft.
Estimated value excluding VAT:
Range: between 7 000 000 and 10 000 000 GBP

II.2.2)Information about options

Options: yes
Description of these options: 2 separate 1 year options (within the 4 year duration of the Framework Agreement).

II.2.3)Information about renewals

This contract is subject to renewal: no

II.3)Duration of the contract or time limit for completion

Starting 1.4.2015. Completion 31.3.2019

Section III: Legal, economic, financial and technical information

III.1)Conditions relating to the contract

III.1.1)Deposits and guarantees required:

MOD reserves the right to be supplied an indemnity, guarantee or bank bond if the supplier does not meet the standard for economic and financial standing.

III.1.2)Main financing conditions and payment arrangements and/or reference to the relevant provisions governing them:

Payment will be made on completion of the provision of the goods and services in accordance with the Terms and Conditions of Contract.

III.1.3)Legal form to be taken by the group of economic operators to whom the contract is to be awarded:

In the event that a group of economic operators are to be awarded a contract the group will be required to form a legal entity before any award is undertaken.

III.1.4)Other particular conditions

The performance of the contract is subject to particular conditions: yes
Description of particular conditions: As will be detailed within any resultant Invitation to Tender.
III.2)Conditions for participation

III.2.1)Personal situation of economic operators, including requirements relating to enrolment on professional or trade registers

Information and formalities necessary for evaluating if the requirements are met: The Authority will apply all the offences listed in Article 45(1) of Directive 2004/18/EC (implemented as Regulation 23(1) of the Public Contract Regulations (PCR) 2006 in the UK) and all of the professional misconducts listed at Article 45(2) of Directive 2004/18/EC (see also Regulation 23(2) in the PCR 2006) to the decision of whether a Candidate is eligible to be invited to tender.

A full list of the Regulation 23(1) and 23(2) criteria are at http://www.contracts.mod.uk/delta/project/reasonsForExclusion.html#dspr

Candidates will be required to sign a declaration confirming whether they do or do not have any of the listed criteria as part of the pre-qualification process. For candidates who are registered overseas, you will need to declare if you have any offences/misconduct under your own countries laws, where these laws are equivalent to the Regulation 23 lists.
Candidates who have been convicted of any of the offences under Article 45(1) are ineligible and will not be selected to bid, unless there are overriding requirements in the general interest for doing so.
Candidates who are guilty of any of the offences, circumstances or misconduct under Article 45(2) may be excluded from being selected to bid at the discretion of the Authority.
As detailed within the Pre-Qualification Questionnaire.

III.2.2)Economic and financial ability

Information and formalities necessary for evaluating if the requirements are met: (a) Appropriate statements from banks or, where appropriate, evidence of relevant professional risk indemnity insurance.
(b) The presentation of balance-sheets or extracts from the balance-sheets, where publication of the balance-sheet is required under the law of the country in which the economic operator is established.
(c) A statement of the undertaking’s overall turnover and, where appropriate, of turnover in the area covered by the contract for a maximum of the last 3 financial years available, depending on the date on which the undertaking was set up or the economic operator started trading, as far as the information on these turnovers is available.
As detailed within Pre-Qualification Questionnaire.
Minimum level(s) of standards possibly required: As detailed within Pre-Qualification Questionnaire.

III.2.3)Technical capacity

Information and formalities necessary for evaluating if the requirements are met:
As detailed within the Pre-Qualification Questionnaire.
Minimum level(s) of standards possibly required:
As detailed within the Pre-Qualification Questionnaire.
III.2.4)Information about reserved contracts
III.3)Conditions specific to services contracts

III.3.1)Information about a particular profession

Execution of the service is reserved to a particular profession: no

III.3.2)Staff responsible for the execution of the service

Legal persons should indicate the names and professional qualifications of the staff responsible for the execution of the service: no

Section IV: Procedure

IV.1)Type of procedure

IV.1.1)Type of procedure

Restricted

IV.1.2)Limitations on the number of operators who will be invited to tender or to participate

Envisaged minimum number 1
Objective criteria for choosing the limited number of candidates: As detailed within the Pre-Qualification Questionnaire.
IV.1.3)Reduction of the number of operators during the negotiation or dialogue
IV.2)Award criteria

IV.2.1)Award criteria

The most economically advantageous tender in terms of the criteria stated in the specifications, in the invitation to tender or to negotiate or in the descriptive document

IV.2.2)Information about electronic auction

An electronic auction will be used: no
IV.3)Administrative information

IV.3.1)File reference number attributed by the contracting authority:

C17CSAE/0010

IV.3.2)Previous publication(s) concerning the same contract

Prior information notice

Notice number in the OJEU: 2014/S 159-286075 of 21.8.2014

IV.3.3)Conditions for obtaining specifications and additional documents or descriptive document

IV.3.4)Time limit for receipt of tenders or requests to participate

9.10.2014 – 15:00
IV.3.5)Date of dispatch of invitations to tender or to participate to selected candidates

IV.3.6)Language(s) in which tenders or requests to participate may be drawn up

English.
IV.3.7)Minimum time frame during which the tenderer must maintain the tender
IV.3.8)Conditions for opening of tenders

Section VI: Complementary information

VI.1)Information about recurrence

This is a recurrent procurement: no

VI.2)Information about European Union funds

The contract is related to a project and/or programme financed by European Union funds: no

VI.3)Additional information

The contracting authority considers that this contract may be suitable for economic operators that are small or medium enterprises (SMEs). However, any selection of tenderers will be based solely on the criteria set out for the procurement, and the contract will be awarded on the basis of the most economically advantageous tender. Suppliers interested in working with the Ministry of Defence should register on the MOD Supplier Information Database (SID) Register, available at www.contracts.mod.uk The MOD SID is a database of active and potential suppliers available to all MOD and UK Defence procurement personnel, and is the main supplier database of MOD Procurement organisations. Please note: the registration and publication of a company profile on the MOD SID does not mean or imply that the supplier has in any way been vetted or approved by the MOD. Suppliers wishing to compete for advertised MOD contracts must respond to any specific call for competition by submitting a separate expression of interest in accordance with the instructions of the purchasing organisation.

From 2.4.2014 the Government is introducing its new Government Security Classifications Policy (GSC) to replace the current Government Protective Marking Scheme. A key aspect of this is the reduction in the number of security classifications used. All suppliers to the Department are encouraged to make themselves aware of the changes as it may impact on this Requirement. The link below to the www.gov.uk web site provides information on the new GSC.

https://www.gov.uk/government/publications/government-security-classifications

The Authority reserves the right to amend any condition related to security of information to reflect any changes in national law or government policy. If any contract documents are accompanied by instructions on safeguarding classified information (e.g. a Security Aspects Letter), the Authority reserves the right to amend the terms of these instructions to reflect any changes in national law or government policy, whether in respect of the applicable protective marking scheme, specific protective markings given, the aspects to which any protective marking applies, or otherwise.

Advertising Regime OJEU: — This contract opportunity is published in the Official Journal of the European Union (OJEU), the MoD Defence Contracts Bulletin and www.contracts.mod.uk

Suppliers must read through this set of instructions and follow the process to respond to this opportunity.

The information and/or documents for this opportunity are available on http://www.contracts.mod.uk

You must register on this site to respond, if you are already registered you will not need to register again, simply use your existing user-name and password. Please note there is a password reminder link on the homepage.
Suppliers must log in, go to your Response Manager and add the following Access Code: RPSA6764ZY
Please ensure you follow any instruction provided to you here.
The deadline for submitting your response(s) is detailed within this contract notice, you will also have visibility of the deadline date, once you have added the Access code via DCO as the opening and closing date is visible within the opportunity.
Please ensure that you allow yourself plenty of time when responding to this opportunity prior to the closing date and time, especially if you have been asked to upload documents.

If you experience any difficulties please refer to the on-line Frequently Asked Questions (FAQ’s) or the User Guides or contact the MOD DCO Help-desk by emailing support@contracts.mod.uk or Telephone +44 8452707099.

GO Reference: GO-201498-DCB-5987173

VI.4)Procedures for appeal

VI.4.1)Body responsible for appeal procedures

Ministry of Defence, Air Support
C17 CSAE Project Team, Walnut 2, #1232, Abbey Wood
BS34 8JH Bristol
UNITED KINGDOM
E-mail: desc17csae-sco@mod.uk
Telephone: +44 3607982010

Body responsible for mediation procedures

Ministry of Defence, Air Support
C17 CSAE Project Team, Walnut 2, #1232, Abbey Wood
BS34 8JH Bristol
UNITED KINGDOM
E-mail: desc17csae-sco@mod.uk
Telephone: +44 3067982010

VI.4.2)Lodging of appeals

VI.4.3)Service from which information about the lodging of appeals may be obtained

Ministry of Defence, Air Support
C17 CSAE Project Team, Walnut 2, #1232, Abbey Wood
BS34 8JH Bristol
UNITED KINGDOM
E-mail: desc17csae-sco@mod.uk
Telephone: +44 3067982010

VI.5)Date of dispatch of this notice:

8.9.2014