Supply and delivery of a highway coring and laboratory testing service

Supply and delivery of a highway coring and laboratory testing service

Composition and purity testing and analysis services. Blackburn with Darwen Borough Council (BwDBC) is looking to award a Contract to supply and deliver a Highway Coring and Laboratory Testing Service for which suppliers are invited to tender.

United Kingdom-Blackburn: Highway maintenance work

2013/S 153-266871

Contract notice

Services

Directive 2004/18/EC

Section I: Contracting authority

I.1)Name, addresses and contact point(s)

Blackburn with Darwen Borough Council
Town Hall, King William Street
For the attention of: Steven Oldham
BB1 7DY Blackburn
UNITED KINGDOM
Telephone: +44 1254585636
E-mail: steven.oldham@blackburn.gov.uk

Internet address(es):

Address of the buyer profile: www.blackburn.gov.uk

Further information can be obtained from: The above mentioned contact point(s)

Specifications and additional documents (including documents for competitive dialogue and a dynamic purchasing system) can be obtained from: The above mentioned contact point(s)

Tenders or requests to participate must be sent to: The above mentioned contact point(s)

I.2)Type of the contracting authority

Regional or local authority
I.3)Main activity

General public services
I.4)Contract award on behalf of other contracting authorities

The contracting authority is purchasing on behalf of other contracting authorities: no

Section II: Object of the contract

II.1)Description
II.1.1)Title attributed to the contract by the contracting authority:

The supply and delivery of a highway coring and laboratory testing service.
II.1.2)Type of contract and location of works, place of delivery or of performance

Services
Service category No 27: Other services
NUTS code UKD41

II.1.3)Information about a public contract, a framework agreement or a dynamic purchasing system (DPS)

The notice involves the establishment of a framework agreement
II.1.4)Information on framework agreement

Framework agreement with a single operator
Duration of the framework agreement

Duration in years: 4
Estimated total value of purchases for the entire duration of the framework agreement

Estimated value excluding VAT: 360 000 GBP

II.1.5)Short description of the contract or purchase(s)

Highway maintenance work. Road inspection services. Surface surveying services. Composition and purity testing and analysis services. Blackburn with Darwen Borough Council (BwDBC) is looking to award a Contract to supply and deliver a Highway Coring and Laboratory Testing Service for which suppliers are invited to tender.
The contract will be based on a standard range of services as detailed in this specification and associated pricing schedule. The Tenderer will supply the range of services as and when required, to the Council at the contract price.
1.1 Blackburn with Darwen Borough Council wishes to undertake a regular programme of highway coring works for utility reinstatements within the Council’s highway network. The purpose of this approach is to determine compliance with the requirements of the ‘Specification for the Reinstatement of Openings in Highways 1st, 2nd and 3rd Edition’, and the HAUC (UK) Advice Note No. 2012/01 (or any amendment thereof), and dependant on the actual completion date of the reinstatement.
II.1.6)Common procurement vocabulary (CPV)

45233139, 71631480, 71353000, 71610000

II.1.7)Information about Government Procurement Agreement (GPA)

The contract is covered by the Government Procurement Agreement (GPA): no
II.1.8)Lots

This contract is divided into lots: no
II.1.9)Information about variants

Variants will be accepted: no
II.2)Quantity or scope of the contract
II.2.1)Total quantity or scope:
II.2.2)Information about options
II.2.3)Information about renewals
II.3)Duration of the contract or time limit for completion

Starting 4.11.2013.

Section III: Legal, economic, financial and technical information

III.1)Conditions relating to the contract
III.1.1)Deposits and guarantees required:
III.1.2)Main financing conditions and payment arrangements and/or reference to the relevant provisions governing them:
III.1.3)Legal form to be taken by the group of economic operators to whom the contract is to be awarded:
III.1.4)Other particular conditions
III.2)Conditions for participation
III.2.1)Personal situation of economic operators, including requirements relating to enrolment on professional or trade registers
III.2.2)Economic and financial ability

Information and formalities necessary for evaluating if the requirements are met: (a) Appropriate statements from banks or, where appropriate, evidence of relevant professional risk indemnity insurance.
III.2.3)Technical capacity

Information and formalities necessary for evaluating if the requirements are met:
(a) A list of the works carried out over the past five years, accompanied by certificates of satisfactory execution for the most important works. These certificates shall indicate the value, date and site of the works and shall specify whether they were carried out according to the rules of the trade and properly completed. Where appropriate, the competent authority shall submit these certificates to the contracting authority direct.
(b) A list of the principal deliveries effected or the main services provided in the past three years, with the sums, dates and recipients, whether public or private, involved. Evidence of delivery and services provided shall be given: – where the recipient was a contracting authority, in the form of certificates issued or countersigned by the competent authority, – where the recipient was a private purchaser, by the purchaser’s certification or, failing this, simply by a declaration by the economic operator.
(c) An indication of the technicians or technical bodies involved, whether or not belonging directly to the economic operator’s undertaking, especially those responsible for quality control and, in the case of public works contracts, those upon whom the contractor can call in order to carry out the work.
(e) Where the products or services to be supplied are complex or, exceptionally, are required for a special purpose, a check carried out by the contracting authorities or on their behalf by a competent official body of the country in which the supplier or service provider is established, subject to that body’s agreement, on the production capacities of the supplier or the technical capacity of the service provider and, if necessary, on the means of study and research which are available to it and the quality control measures it will operate.
(g) For public works contracts and public services contracts, and only in appropriate cases, an indication of the environmental management measures that the economic operator will be able to apply when performing the contract.
(h) A statement of the average annual manpower of the service provider or contractor and the number of managerial staff for the last 3 years.
(j) An indication of the proportion of the contract which the services provider intends possibly to subcontract.
(k) With regard to the products to be supplied: (i) samples, descriptions and/or photographs, the authenticity of which must be certified if the contracting authority so requests; (ii) certificates drawn up by official quality control institutes or agencies of recognised competence attesting the conformity of products clearly identified by references to specifications or standards.
As in the ITT.
Minimum level(s) of standards possibly required:
As stated in the ITT.
III.2.4)Information about reserved contracts
III.3)Conditions specific to services contracts
III.3.1)Information about a particular profession
III.3.2)Staff responsible for the execution of the service

Section IV: Procedure

IV.1)Type of procedure
IV.1.1)Type of procedure

Open
IV.1.2)Limitations on the number of operators who will be invited to tender or to participate
IV.1.3)Reduction of the number of operators during the negotiation or dialogue
IV.2)Award criteria
IV.2.1)Award criteria

The most economically advantageous tender in terms of the criteria stated in the specifications, in the invitation to tender or to negotiate or in the descriptive document
IV.2.2)Information about electronic auction

An electronic auction will be used: no
IV.3)Administrative information
IV.3.1)File reference number attributed by the contracting authority:

MDBA/ST 2013
IV.3.2)Previous publication(s) concerning the same contract

no
IV.3.3)Conditions for obtaining specifications and additional documents or descriptive document

Time limit for receipt of requests for documents or for accessing documents: 20.9.2013 – 17:00
Payable documents: no
IV.3.4)Time limit for receipt of tenders or requests to participate

30.9.2013 – 17:00
IV.3.5)Date of dispatch of invitations to tender or to participate to selected candidates
IV.3.6)Language(s) in which tenders or requests to participate may be drawn up

English.
IV.3.7)Minimum time frame during which the tenderer must maintain the tender
IV.3.8)Conditions for opening of tenders

Section VI: Complementary information

VI.1)Information about recurrence
VI.2)Information about European Union funds

The contract is related to a project and/or programme financed by European Union funds: no
VI.3)Additional information

To view this notice, please click here: https://www.delta-esourcing.com/delta/viewNotice.html?noticeId=68429051

GO Reference: GO-201385-PRO-5011835.

VI.4)Procedures for appeal
VI.4.1)Body responsible for appeal procedures
VI.4.2)Lodging of appeals

Precise information on deadline(s) for lodging appeals: Following the evaluation of tenders, Blackburn with Darwen Borough Council will incorporate a minimum of 10 calendar days standstill period: this period will commence from the point that the information required by regulation 32 of the Public Contracts Regulations 2006 (SI 2006 No 5) (“the Regulations”) on the award of the contract is communicated to all tenderers and candidates. If an appeal regarding the award of a contract has not been successfully resolved the Regulations provide for aggrieved parties who have been harmed or are at risk of harm by a breach of the rules to take action in the High Court (England, Wales and Northern Ireland). Any such action must be brought within the time limits set out in the Regulations. The purpose of the standstill period referred to above is to allow parties to raise any issues and if necessary apply to the Courts to set aside the award decision before the contract is entered into.
VI.4.3)Service from which information about the lodging of appeals may be obtained

VI.5)Date of dispatch of this notice:5.8.2013