Supply and Delivery of Estimated Animal Feedstuffs

Supply and Delivery of Estimated Animal Feedstuffs

At AFBI Hillsborough, research and development is undertaken to underpin sustainable livestock and renewable energy systems. To undertake these programmes, a range of farm livestock are required and AFBI requires the supply and delivery of animal feedstuffs.

United Kingdom-Hillsborough: Animal feedstuffs

2013/S 128-219844

Contract notice

Supplies

Directive 2004/18/EC

Section I: Contracting authority

I.1)Name, addresses and contact point(s)

Agri-Food and Biosciences Institute
Large Park, Hillsborough
For the attention of: Patrice McPolin
BT26 6DR Hillsborough
UNITED KINGDOM
Telephone: +44 2890816867
E-mail: patrice.mcpolin@dfpni.gov.uk

Internet address(es):

General address of the contracting authority: www.afbini.gov.uk

Address of the buyer profile: www.cpdni.gov.uk

Further information can be obtained from: The above mentioned contact point(s)

Specifications and additional documents (including documents for competitive dialogue and a dynamic purchasing system) can be obtained from: The above mentioned contact point(s)

Tenders or requests to participate must be sent to: The above mentioned contact point(s)

I.2)Type of the contracting authority

Body governed by public law
I.3)Main activity

General public services
I.4)Contract award on behalf of other contracting authorities

The contracting authority is purchasing on behalf of other contracting authorities: no

Section II: Object of the contract

II.1)Description
II.1.1)Title attributed to the contract by the contracting authority:

AFBI – Supply and Delivery of Estimated Animal Feedstuffs.
II.1.2)Type of contract and location of works, place of delivery or of performance

Supplies
Purchase
NUTS code UKN

II.1.3)Information about a public contract, a framework agreement or a dynamic purchasing system (DPS)

The notice involves a public contract
II.1.4)Information on framework agreement
II.1.5)Short description of the contract or purchase(s)

At AFBI Hillsborough, research and development is undertaken to underpin sustainable livestock and renewable energy systems. To undertake these programmes, a range of farm livestock are required and AFBI requires the supply and delivery of animal feedstuffs.
II.1.6)Common procurement vocabulary (CPV)

15700000

II.1.7)Information about Government Procurement Agreement (GPA)

The contract is covered by the Government Procurement Agreement (GPA): yes
II.1.8)Lots

This contract is divided into lots: no
II.1.9)Information about variants

Variants will be accepted: no
II.2)Quantity or scope of the contract
II.2.1)Total quantity or scope:

Estimated value excluding VAT:
Range: between 2 500 000 and 3 000 000 GBP
II.2.2)Information about options
II.2.3)Information about renewals
II.3)Duration of the contract or time limit for completion

Duration in months: 60 (from the award of the contract)

Section III: Legal, economic, financial and technical information

III.1)Conditions relating to the contract
III.1.1)Deposits and guarantees required:
III.1.2)Main financing conditions and payment arrangements and/or reference to the relevant provisions governing them:
III.1.3)Legal form to be taken by the group of economic operators to whom the contract is to be awarded:
III.1.4)Other particular conditions
III.2)Conditions for participation
III.2.1)Personal situation of economic operators, including requirements relating to enrolment on professional or trade registers
III.2.2)Economic and financial ability
III.2.3)Technical capacity

Minimum level(s) of standards possibly required:
Technical Ability
— Quality Assurance
Tenderers must demonstrate that they are approved by the Department of Agriculture and Rural Development Quality Assurance Branch by providing a current approval number for manufacturing livestock feedstuffs.
— Universal Feed Assurance Scheme
Tenderers must demonstrate that all straight and concentrate feedstuffs which they may supply are from a UFAS (Universal Feed Assurance Scheme) registered business, by supplying a current copy of certificate/s.
— Vehicles
Tenderers must confirm that they will have a minimum of 2 bulk blower vehicles and 2 flat bed vehicles to service this contract.
— Mixes
Tenderers must confirm that they have the ability to manufacture designated mixes or have them manufactured by a secondary supplier.
III.2.4)Information about reserved contracts
III.3)Conditions specific to services contracts
III.3.1)Information about a particular profession
III.3.2)Staff responsible for the execution of the service

Section IV: Procedure

IV.1)Type of procedure
IV.1.1)Type of procedure

Open
IV.1.2)Limitations on the number of operators who will be invited to tender or to participate
IV.1.3)Reduction of the number of operators during the negotiation or dialogue
IV.2)Award criteria
IV.2.1)Award criteria

The most economically advantageous tender in terms of the criteria stated in the specifications, in the invitation to tender or to negotiate or in the descriptive document
IV.2.2)Information about electronic auction

An electronic auction will be used: no
IV.3)Administrative information
IV.3.1)File reference number attributed by the contracting authority:

P_11984
IV.3.2)Previous publication(s) concerning the same contract

no
IV.3.3)Conditions for obtaining specifications and additional documents or descriptive document

Time limit for receipt of requests for documents or for accessing documents: 9.8.2013 – 15:00
IV.3.4)Time limit for receipt of tenders or requests to participate

9.8.2013 – 15:00
IV.3.5)Date of dispatch of invitations to tender or to participate to selected candidates
IV.3.6)Language(s) in which tenders or requests to participate may be drawn up

English.
IV.3.7)Minimum time frame during which the tenderer must maintain the tender

in days: 90 (from the date stated for receipt of tender)
IV.3.8)Conditions for opening of tenders

Persons authorised to be present at the opening of tenders: yes
Additional information about authorised persons and opening procedure: Authorised Person of Department of Finance and Personnel.

Section VI: Complementary information

VI.1)Information about recurrence

This is a recurrent procurement: no
VI.2)Information about European Union funds

The contract is related to a project and/or programme financed by European Union funds: no
VI.3)Additional information

Suppliers Instructions How to Express Interest in this Tender~: 1. Register your company on the eSourcing portal (this is only required once): Suppliers Instructions How to Express Interest in this Tender~: 1. Register your company on the eSourcing portal (this is only required once): https://e-sourcingni.bravosolution.co.uk and click the link to register – Accept the terms and conditions and click ‘continue’ – Enter your correct business and user details – Note the username you chose and click ‘Save’ when complete – You will shortly receive an email with your unique password (please keep this secure) 2. Express an Interest in the tender – Login to the portal with the username/password – Click the ‘PQQs / ITTs Open To All Suppliers’ link. (These are Pre-Qualification Questionnaires or Invitations to Tender open to any registered supplier) – Click on the relevant PQQ/ ITT to access the content. – Click the ‘Express Interest’ button at the top of the page. – This will move the PQQ /ITT into your ‘My PQQs/ My ITTs’ page. (This is a secure area reserved for your projects only) -You can now access any attachments by clicking ‘Buyer Attachments’ in the ‘PQQ/ ITT Details’ box 3. Responding to the tender – Click ‘My Response’ under ‘PQQ/ ITT Details’, you can choose to ‘Create Response’ or to ‘Decline to Respond’ (please give a reason if declining) – You can now use the ‘Messages’ function to communicate with the buyer and seek any clarification – Note the deadline for completion, then follow the onscreen instructions to complete the PQQ/ ITT – There may be a mixture of online & offline actions for you to perform (there is detailed online help available) You must then submit your reply using the ‘Submit Response’ button at the top of the page. If you require any further assistance please consult the online help, or contact the eTendering help desk.

VI.4)Procedures for appeal
VI.4.1)Body responsible for appeal procedures
VI.4.2)Lodging of appeals

Precise information on deadline(s) for lodging appeals: CPD will incorporate a standstill period at the point information on the award of the contract is communicated to tenderers. That notification will provide full information on the award decision. The standstill period, which will be for a minimum of 10 calendar days, provides time for unsuccessful tenderers to challenge the award decision before the contract is entered into.
The Public Contracts Regulations 2006 (SI 2006 No 5) provide for aggrieved parties who have been harmed or are at risk of harm by a breach of the rules to take action in the High Court (England, Wales and Northern Ireland).
VI.4.3)Service from which information about the lodging of appeals may be obtained

VI.5)Date of dispatch of this notice:28.6.2013