Home
Supply of Confocal Microscope
Laboratory Equipment

Supply of Confocal Microscope

Tuesday, 15 March 2016, 12:03

Supply of Confocal Microscope

The Wolfson Inst for Biomedical Research requires a spinning disc confocal microscope.

United Kingdom-London: Laboratory, optical and precision equipments (excl. glasses)

2016/S 049-081095

Contract notice

Supplies

Directive 2004/18/EC

Section I: Contracting authority

I.1)Name, addresses and contact point(s)

University College London
Gower Street
Contact point(s): Procurement Services
WC1E 6BT London
UNITED KINGDOM
E-mail: tenders.procurement@ucl.ac.uk

Internet address(es):

General address of the contracting authority: https://in-tendhost.co.uk/ucl/aspx/Home

Address of the buyer profile: https://www.ucl.ac.uk/procurement/

Further information can be obtained from: The above mentioned contact point(s)

Specifications and additional documents (including documents for competitive dialogue and a dynamic purchasing system) can be obtained from: The above mentioned contact point(s)

Tenders or requests to participate must be sent to: The above mentioned contact point(s)

I.2)Type of the contracting authority

Body governed by public law

I.3)Main activity

Education
Other: higher education

I.4)Contract award on behalf of other contracting authorities

The contracting authority is purchasing on behalf of other contracting authorities: no

Section II: Object of the contract

II.1)Description

II.1.1)Title attributed to the contract by the contracting authority:

Spinning Disc Confocal Microscope.

II.1.2)Type of contract and location of works, place of delivery or of performance

Supplies
Purchase

NUTS code UKI

II.1.3)Information about a public contract, a framework agreement or a dynamic purchasing system (DPS)

The notice involves a public contract
II.1.4)Information on framework agreement

II.1.5)Short description of the contract or purchase(s)

The Wolfson Inst for Biomedical Research requires a spinning disc confocal microscope, as fully described in Schedule 1 of this tender. The budget for this tender is 230 000 GBP. Suppliers that provide tender responses above this budget limited will have their offers rejected.

II.1.6)Common procurement vocabulary (CPV)

38000000

II.1.7)Information about Government Procurement Agreement (GPA)

The contract is covered by the Government Procurement Agreement (GPA): no

II.1.8)Lots

This contract is divided into lots: no

II.1.9)Information about variants

Variants will be accepted: no
II.2)Quantity or scope of the contract

II.2.1)Total quantity or scope:

UCL would like to invite suppliers to submit bids for supply of a Spinning Disc Confocal Microscope as described in the tender documents.
Estimated value excluding VAT: 230 000 GBP.

II.2.2)Information about options

Options: no
II.2.3)Information about renewals

II.3)Duration of the contract or time limit for completion

Duration in months: 12 (from the award of the contract)

Section III: Legal, economic, financial and technical information

III.1)Conditions relating to the contract

III.1.1)Deposits and guarantees required:

As set out in the invitation to tender.

III.1.2)Main financing conditions and payment arrangements and/or reference to the relevant provisions governing them:

As set out in the invitation to tender.

III.1.3)Legal form to be taken by the group of economic operators to whom the contract is to be awarded:

As set out in the invitation to tender.

III.1.4)Other particular conditions

The performance of the contract is subject to particular conditions: no
III.2)Conditions for participation

III.2.1)Personal situation of economic operators, including requirements relating to enrolment on professional or trade registers

Information and formalities necessary for evaluating if the requirements are met: Information and formalities necessary for evaluating if the requirements are met: Any requirements are set out in the Invitation to Tender (ITT) consistent with the provisions of the Public Procurement Regulations 2015.

III.2.2)Economic and financial ability

Information and formalities necessary for evaluating if the requirements are met: Information and formalities necessary for evaluating if the requirements are met: Any requirements are set out in the Invitation to Tender (ITT) consistent with the provisions of the Public Procurement Regulations 2015.

III.2.3)Technical capacity

Information and formalities necessary for evaluating if the requirements are met:
Information and formalities necessary for evaluating if the requirements are met: Any requirements are set out in the Invitation to Tender (ITT) consistent with the provisions of the Public Procurement Regulations 2015.
III.2.4)Information about reserved contracts
III.3)Conditions specific to services contracts
III.3.1)Information about a particular profession
III.3.2)Staff responsible for the execution of the service

Section IV: Procedure

IV.1)Type of procedure

IV.1.1)Type of procedure

Open
IV.1.2)Limitations on the number of operators who will be invited to tender or to participate
IV.1.3)Reduction of the number of operators during the negotiation or dialogue
IV.2)Award criteria

IV.2.1)Award criteria

The most economically advantageous tender in terms of the criteria stated in the specifications, in the invitation to tender or to negotiate or in the descriptive document

IV.2.2)Information about electronic auction

An electronic auction will be used: no
IV.3)Administrative information

IV.3.1)File reference number attributed by the contracting authority:

UCL-PROC-238

IV.3.2)Previous publication(s) concerning the same contract

no

IV.3.3)Conditions for obtaining specifications and additional documents or descriptive document

Time limit for receipt of requests for documents or for accessing documents: 14.4.2016
Payable documents: no

IV.3.4)Time limit for receipt of tenders or requests to participate

15.4.2016
IV.3.5)Date of dispatch of invitations to tender or to participate to selected candidates

IV.3.6)Language(s) in which tenders or requests to participate may be drawn up

English.
IV.3.7)Minimum time frame during which the tenderer must maintain the tender

IV.3.8)Conditions for opening of tenders

Date: 15.4.2016
Persons authorised to be present at the opening of tenders: yes
Additional information about authorised persons and opening procedure:

Section VI: Complementary information

VI.1)Information about recurrence

This is a recurrent procurement: no

VI.2)Information about European Union funds

The contract is related to a project and/or programme financed by European Union funds: no
VI.3)Additional information
VI.4)Procedures for appeal

VI.4.1)Body responsible for appeal procedures

Royal Court of Justice
The Strand
WC2A 2LL London
UNITED KINGDOM
Internet address: www.hmcouts-service.gov.uk

Body responsible for mediation procedures

Centre for Effective Dispute Resolution (CEDR)
70 Fleet Street
EC4Y 1EU London
UNITED KINGDOM
E-mail: info@cedr.com
Telephone: +44 2075366000
Internet address: www.cedr.com

VI.4.2)Lodging of appeals

Precise information on deadline(s) for lodging appeals: In accordance with Regulation 86 of the Public Contracts Regulations 2015, UCL will incorporate a minimum 10 calendar day standstill period starting from the day when contract award was notified to the bidders. Unsuccessful bidders will be provided with an Award Decision Notice. Tenderers have a right to appeal provided for within the Public Contracts Regulations 2015. Any such proceedings must be brought in the High Court of England and Wales.

VI.4.3)Service from which information about the lodging of appeals may be obtained

Cabinet Office
70 Whitehall
SW1A 2AS London
UNITED KINGDOM
Telephone: +44 2072761234

VI.5)Date of dispatch of this notice:

7.3.2016