Supply hERG and Purkinje Fibre Assays to Ministry of Defence
hERG (human ether-a-go-go related gene) and Purkinje Fibre Assays are required for 2 separate projects to establish QT prolongation in alignment with ICH S7B.
United Kingdom-Salisbury: Laboratory services
2014/S 203-359716
Contract notice
Services
Directive 2004/18/EC
Section I: Contracting authority
I.1)Name, addresses and contact point(s)
Ministry of Defence, DSTL
Commercial Services Department, Building 5, G02-D, Dstl Porton Down
For the attention of: Chris Redwood
SP4 0JQ Salisbury
UNITED KINGDOM
Telephone: +44 3067705406
E-mail: credwood@dstl.gov.uk
Internet address(es):
General address of the contracting authority: www.gov.uk/dstl
Further information can be obtained from: The above mentioned contact point(s)
Specifications and additional documents (including documents for competitive dialogue and a dynamic purchasing system) can be obtained from: The above mentioned contact point(s)
Tenders or requests to participate must be sent to: The above mentioned contact point(s)
I.2)Type of the contracting authority
I.3)Main activity
I.4)Contract award on behalf of other contracting authorities
Section II: Object of the contract
II.1.1)Title attributed to the contract by the contracting authority:
II.1.2)Type of contract and location of works, place of delivery or of performance
Service category No 8: Research and development services
NUTS code UKK15
II.1.3)Information about a public contract, a framework agreement or a dynamic purchasing system (DPS)
II.1.5)Short description of the contract or purchase(s)
II.1.6)Common procurement vocabulary (CPV)
71900000, 73111000, 73100000, 73110000, 73400000, 73000000
II.1.7)Information about Government Procurement Agreement (GPA)
II.1.8)Lots
II.1.9)Information about variants
II.2.1)Total quantity or scope:
II.2.2)Information about options
II.2.3)Information about renewals
II.3)Duration of the contract or time limit for completion
Section III: Legal, economic, financial and technical information
III.1.4)Other particular conditions
III.2.1)Personal situation of economic operators, including requirements relating to enrolment on professional or trade registers
Information and formalities necessary for evaluating if the requirements are met: The Authority will apply all the offences listed in Article 45(1) of Directive 2004/18/EC (implemented as Regulation 23(1) of the Public Contract Regulations (PCR) 2006 in the UK) and all of the professional misconducts listed at Article 45(2) of Directive 2004/18/EC (see also Regulation 23(2) in the PCR 2006) to the decision of whether a Candidate is eligible to be invited to tender.
A full list of the Regulation 23(1) and 23(2) criteria are at http://www.contracts.mod.uk/delta/project/reasonsForExclusion.html#dspr
Candidates will be required to sign a declaration confirming whether they do or do not have any of the listed criteria as part of the pre-qualification process. For candidates who are registered overseas, you will need to declare if you have any offences/misconduct under your own countries laws, where these laws are equivalent to the Regulation 23 lists.
Candidates who have been convicted of any of the offences under Article 45(1) are ineligible and will not be selected to bid, unless there are overriding requirements in the general interest for doing so.
Candidates who are guilty of any of the offences, circumstances or misconduct under Article 45(2) may be excluded from being selected to bid at the discretion of the Authority.
III.2.2)Economic and financial ability
(b) The presentation of balance-sheets or extracts from the balance-sheets, where publication of the balance-sheet is required under the law of the country in which the economic operator is established.
III.2.3)Technical capacity
(d) A description of the technical facilities and measures used by the supplier or service provider for ensuring quality and the undertaking’s study and research facilities;
(e) Where the products or services to be supplied are complex or, exceptionally, are required for a special purpose, a check carried out by the contracting authorities or on their behalf by a competent official body of the country in which the supplier or service provider is established, subject to that body’s agreement, on the production capacities of the supplier or the technical capacity of the service provider and, if necessary, on the means of study and research which are available to it and the quality control measures it will operate;
(j) An indication of the proportion of the contract which the services provider intends possibly to subcontract;
(k) With regard to the products to be supplied: (i) samples, descriptions and/or photographs, the authenticity of which must be certified if the contracting authority so requests; (ii) certificates drawn up by official quality control institutes or agencies of recognised competence attesting the conformity of products clearly identified by references to specifications or standards.
Minimum level(s) of standards possibly required:
Studies must be performed according to Good Laboratory Practice (GLP).
III.3.1)Information about a particular profession
III.3.2)Staff responsible for the execution of the service
Section IV: Procedure
IV.1.1)Type of procedure
IV.1.2)Limitations on the number of operators who will be invited to tender or to participate
IV.2.1)Award criteria
IV.2.2)Information about electronic auction
IV.3.1)File reference number attributed by the contracting authority:
IV.3.2)Previous publication(s) concerning the same contract
IV.3.4)Time limit for receipt of tenders or requests to participate
IV.3.5)Date of dispatch of invitations to tender or to participate to selected candidates
IV.3.6)Language(s) in which tenders or requests to participate may be drawn up
Section VI: Complementary information
VI.2)Information about European Union funds
VI.3)Additional information
The contracting authority considers that this contract may be suitable for economic operators that are small or medium enterprises (SMEs). However, any selection of tenderers will be based solely on the criteria set out for the procurement, and the contract will be awarded on the basis of the most economically advantageous tender. Suppliers interested in working with the Ministry of Defence should register on the MOD Supplier Information Database (SID). Register, available at www.contracts.mod.uk The MOD SID is a database of active and potential suppliers available to all MOD and UK Defence procurement personnel, and is the main supplier database of MOD Procurement organisations. Please note: the registration and publication of a company profile on the MOD SID does not mean or imply that the supplier has in any way been vetted or approved by the MOD. Suppliers wishing to compete for advertised MOD contracts must respond to any specific call for competition by submitting a separate expression of interest in accordance with the instructions of the purchasing organisation.
From 2.4.2014 the Government is introducing its new Government Security Classifications Policy (GSC) to replace the current Government Protective Marking Scheme. A key aspect of this is the reduction in the number of security classifications used. All suppliers to the Department are encouraged to make themselves aware of the changes as it may impact on this Requirement. The link below to the Gov.uk website provides information on the new GSC.
https://www.gov.uk/government/publications/government-security-classifications
The Authority reserves the right to amend any condition related to security of information to reflect any changes in national law or government policy. If any contract documents are accompanied by instructions on safeguarding classified information (e.g. a Security Aspects Letter), the Authority reserves the right to amend the terms of these instructions to reflect any changes in national law or government policy, whether in respect of the applicable protective marking scheme, specific protective markings given, the aspects to which any protective marking applies, or otherwise.
Advertising Regime OJEU: — This contract opportunity is published in the Official Journal of the European Union (OJEU), the MoD Defence Contracts Bulletin and www.contracts.mod.uk
Suppliers must read through this set of instructions and follow the process to respond to this opportunity.
The information and/or documents for this opportunity are available on http://www.contracts.mod.uk
You must register on this site to respond, if you are already registered you will not need to register again, simply use your existing username and password. Please note there is a password reminder link on the homepage.
Suppliers must log in, go to your Response Manager and add the following Access Code: DWADA46FTR.
Please ensure you follow any instruction provided to you here.
The deadline for submitting your response(s) is detailed within this contract notice, you will also have visibility of the deadline date, once you have added the Access code via DCO as the opening and closing date is visible within the opportunity.
Please ensure that you allow yourself plenty of time when responding to this opportunity prior to the closing date and time, especially if you have been asked to upload documents.
If you experience any difficulties please refer to the online Frequently Asked Questions (FAQ’s) or the User Guides or contact the MOD DCO Helpdesk by e-mailing support@contracts.mod.uk or Telephone +44 8452707099.
GO Reference: GO-20141017-DCB-6096858.
VI.4.1)Body responsible for appeal procedures
Ministry of Defence, DSTL
Body responsible for mediation procedures
Ministry of Defence, DSTL
VI.4.3)Service from which information about the lodging of appeals may be obtained
Ministry of Defence, DSTL
VI.5)Date of dispatch of this notice: