Supply of A Multiphoton Confocal Microscope
The Department of Medicine requires a multiphoton confocal microscope system to provide multidimensional multimode multiphoton and single photon confocal intravital imaging capabilities.
UK-Cambridge: Laboratory, optical and precision equipments (excl. glasses)
2013/S 107-182777
Section I: Contracting authority
I.1)Name, addresses and contact point(s)
The Chancellor, Masters and Scholars of The University of Cambridge
1st Floor South, Greenwich House, Madingley Rise
Contact point(s): Procurement Services
CB3 0TX Cambridge
UNITED KINGDOM
Telephone: +44 1223332233
E-mail: purchasing.intend@admin.cam.ac.uk
Fax: +44 1223765988
Internet address(es):
General address of the contracting authority: https://in-tendhost.co.uk/universityofcambridge
Electronic submission of tenders and requests to participate: https://in-tendhost.co.uk/universityofcambridge
Further information can be obtained from: The above mentioned contact point(s)
Specifications and additional documents (including documents for competitive dialogue and a dynamic purchasing system) can be obtained from: The above mentioned contact point(s)
Tenders or requests to participate must be sent to: The above mentioned contact point(s)
I.2)Type of the contracting authority
Other: Higher Education/Research
I.3)Main activity
Education
I.4)Contract award on behalf of other contracting authorities
The contracting authority is purchasing on behalf of other contracting authorities: no
Section II: Object of the contract
II.1)Description
II.1.1)Title attributed to the contract by the contracting authority:
UCAM 064/13 – Supply of A Multiphoton Confocal Microscope.
II.1.2)Type of contract and location of works, place of delivery or of performance
Supplies
Purchase
NUTS code UKH1
II.1.3)Information about a public contract, a framework agreement or a dynamic purchasing system (DPS)
The notice involves a public contract
II.1.4)Information on framework agreement
II.1.5)Short description of the contract or purchase(s)
The Department of Medicine requires a multiphoton confocal microscope system to provide multidimensional multimode multiphoton and single photon confocal intravital imaging capabilities.
This system will be used for intravital microscopy of live specimens including small mammal animal models and in addition tissue samples or cultured cells (fixed or unfixed).
II.1.6)Common procurement vocabulary (CPV)
38000000, 38300000, 38400000, 38900000, 38600000
II.1.7)Information about Government Procurement Agreement (GPA)
The contract is covered by the Government Procurement Agreement (GPA): no
II.1.8)Lots
This contract is divided into lots: no
II.1.9)Information about variants
Variants will be accepted: yes
II.2)Quantity or scope of the contract
II.2.1)Total quantity or scope:
One (1).
II.2.2)Information about options
Options: no
II.2.3)Information about renewals
This contract is subject to renewal: no
II.3)Duration of the contract or time limit for completion
Duration in months: 24 (from the award of the contract)
Section III: Legal, economic, financial and technical information
III.1)Conditions relating to the contract
III.1.1)Deposits and guarantees required:
As set out in the Tender documents.
III.1.2)Main financing conditions and payment arrangements and/or reference to the relevant provisions governing them:
As set out in the Tender documents.
III.1.3)Legal form to be taken by the group of economic operators to whom the contract is to be awarded:
As set out in the Tender documents.
III.1.4)Other particular conditions
The performance of the contract is subject to particular conditions: no
III.2)Conditions for participation
III.2.1)Personal situation of economic operators, including requirements relating to enrolment on professional or trade registers
Information and formalities necessary for evaluating if the requirements are met: As set out in the Tender documents.
III.2.2)Economic and financial ability
Information and formalities necessary for evaluating if the requirements are met: As set out in the Tender documents.
Minimum level(s) of standards possibly required: As set out in the Tender documents.
III.2.3)Technical capacity
Information and formalities necessary for evaluating if the requirements are met:
As set out in the Tender documents.
Minimum level(s) of standards possibly required:
As set out in the Tender documents.
III.2.4)Information about reserved contracts
III.3)Conditions specific to services contracts
III.3.1)Information about a particular profession
Execution of the service is reserved to a particular profession: no
III.3.2)Staff responsible for the execution of the service
Legal persons should indicate the names and professional qualifications of the staff responsible for the execution of the service: no
Section IV: Procedure
IV.1)Type of procedure
IV.1.1)Type of procedure
Open
IV.1.2)Limitations on the number of operators who will be invited to tender or to participate
IV.1.3)Reduction of the number of operators during the negotiation or dialogue
Recourse to staged procedure to gradually reduce the number of solutions to be discussed or tenders to be negotiated no
IV.2)Award criteria
IV.2.1)Award criteria
The most economically advantageous tender in terms of the criteria stated in the specifications, in the invitation to tender or to negotiate or in the descriptive document
IV.2.2)Information about electronic auction
An electronic auction will be used: no
IV.3)Administrative information
IV.3.1)File reference number attributed by the contracting authority:
UCAM 064/13.
IV.3.2)Previous publication(s) concerning the same contract
no
IV.3.3)Conditions for obtaining specifications and additional documents or descriptive document
Time limit for receipt of requests for documents or for accessing documents: 1.7.2013 – 12:00
Payable documents: no
IV.3.4)Time limit for receipt of tenders or requests to participate
1.7.2013 – 12:00
IV.3.5)Date of dispatch of invitations to tender or to participate to selected candidates
IV.3.6)Language(s) in which tenders or requests to participate may be drawn up
English.
IV.3.7)Minimum time frame during which the tenderer must maintain the tender
in days: 90 (from the date stated for receipt of tender)
IV.3.8)Conditions for opening of tenders
Persons authorised to be present at the opening of tenders: no
VI.2)Information about European Union funds
The contract is related to a project and/or programme financed by European Union funds: no
VI.3)Additional information
The University of Cambridge is not a public body within the meaning of the Public Contracts Regulations 2006 (Directive 2004/18) and is not subject to the procurement legislation. Where the University advertises contracts in the Official Journal of the European Union, it does so on a voluntary basis and does not undertake any obligation to comply with the procurement legislation. The University reserves its rights in full to adapt or step outside the procedures in the procurement legislation as the University considers necessary. Information about the tender process to be followed does not amount to a legally binding offer by the University to follow the process so described. The University reserves the right not to follow or to modify the procedures as the University considers necessary. The tender process is being conducted electronically via In-tend.
Suppliers are required to register on this website:
https://in-tendhost.co.uk/universityofcambridge in order to receive documentation. After registering the tender documenation can then be downloaded. All tender responses and any supporting documentation must be submitted through this system. There must be no postal correspondence from bidders unless agreed by the University. Tenders shall not be sent and will not be accepted by fax or email.
VI.4.3)Service from which information about the lodging of appeals may be obtained