Tender for 20mm KAA Cannon and GAMB01 Mount Spares

Tender for 20mm KAA Cannon and GAMB01 Mount Spares

Supply spares to support 20 mm KAA cannon and GAMB01 Mount.

United Kingdom-Bristol: Machine guns

2020/S 078-185581

Contract notice

Supplies

Directive 2009/81/EC

Section I: Contracting authority/entity

I.1)Name, addresses and contact point(s)

Official name: Ministry of Defence, Weapons, International Guns, Missiles and Rockets (IGMR) Project Team
Postal address: MOD Abbey Wood
Town: Bristol
Postal code: BS34 8JH
Country: United Kingdom
E-mail: harvey.webber100@mod.gov.uk
Telephone: +44 3067934604

Internet address(es):

General address of the contracting authority/entity: https://www.gov.uk/government/organisations/defence-equipment-and-support

Further information can be obtained from:
The above mentioned contact point(s)

Specifications and additional documents (including documents for competitive dialogue and a dynamic purchasing system) can be obtained from:
The above mentioned contact point(s)

Tenders or requests to participate must be sent to:
The above mentioned contact point(s)

I.2)Type of the contracting authority

Ministry or any other national or federal authority, including their regional or local sub-divisions

I.3)Main activity

Defence

I.4)Contract award on behalf of other contracting authorities/entities

The contracting authority is purchasing on behalf of other contracting authorities: no

Section II: Object of the contract

II.1)Description

II.1.1)Title attributed to the contract by the contracting authority:

20mm KAA Cannon and GAMB01 Mount Spares

II.1.2)Type of contract and location of works, place of delivery or of performance

Supplies
Purchase
Main site or location of works, place of delivery or of performance: Bristol, City of.

NUTS code UKK11

II.1.3)Information on framework agreement
II.1.4)Information on framework agreement

II.1.5)Short description of the contract or purchase(s):

Machine guns, Machine guns, Machine Guns. Provision of spares to support 20 mm KAA cannon and GAMB01 Mount.

II.1.6)Common procurement vocabulary (CPV)

35321300

II.1.7)Information about subcontracting

The tenderer has to indicate in the tender any share of the contract it may intend to subcontract to third parties and any proposed subcontractor, as well as the subject-matter of the subcontracts for which they are proposed

II.1.8)Lots

This contract is divided into lots: no

II.1.9)Information about variants

Variants will be accepted: no
II.2)Quantity or scope of the contract

II.2.1)Total quantity or scope:

Estimated value excluding VAT: 2 320 000 GBP

II.2.2)Information about options

Options: no

II.2.3)Information about renewals

This contract is subject to renewal: no
II.3)Duration of the contract or time limit for completion

Section III: Legal, economic, financial and technical information

III.1)Conditions relating to the contract

III.1.1)Deposits and guarantees required:

The authority reserves the right to require an indemnity, guarantee or bank bond.

III.1.2)Main financing conditions and payment arrangements and/or reference to the relevant provisions governing them:

As specified in the invitation to tender.

III.1.3)Legal form to be taken by the group of economic operators to whom the contract is to be awarded:

If a group of economic operators submits a bid, the group must nominate a lead organisation to deal with the authority.
The authority shall require the group to form a legal entity before entering into the contract.

III.1.4)Other particular conditions to which the performance of the contract is subject, in particular with regard to security of supply and security of information:

The authority reserves the right to amend any condition related to security of information to reflect any changes in national law or government policy.
If any contract documents are accompanied by a security aspects letter, the authority reserves the right to amend the terms of the security aspects letter or reflect any changes in national law or government policy, whether in respect of the applicable protective marking scheme, specific protective marking given, the aspects to which any protective marking applies or otherwise.
III.1.5)Information about security clearance:
III.2)Conditions for participation

III.2.1)Personal situation

Criteria regarding the personal situation of economic operators (that may lead to their exclusion) including requirements relating to enrolment on professional or trade registers

Information and formalities necessary for evaluating if the requirements are met: The authority will apply all the offences listed in Article 39(1) of Directive 2009/81/EC (implemented as Regulation 23(1) of the Defence and Security Public Contract Regulations (DSPCR) 2011 in the UK) and all of the professional misconducts listed at Article 39(2) of Directive 2009/81/EC (see also Regulation 23(2) in the DSPCR 2011) to the decision of whether a candidate is eligible to be invited to tender.

A full list of the Regulation 23(1) and 23(2) criteria are at http://www.contracts.mod.uk/delta/project/reasonsForExclusion.html#dspr

Candidates will be required to sign a declaration confirming whether they do or do not have any of the listed criteria as part of the pre-qualification process.
Candidates who have been convicted of any of the offences under Article 39(1) are ineligible and will not be selected to bid, unless there are overriding requirements in the general interest (including defence and security factors) for doing so.
Candidates who are guilty of any of the offences, circumstances or misconduct under Article 39(2) may be excluded from being selected to bid at the discretion of the authority.

III.2.2)Economic and financial ability

Criteria regarding the economic and financial standing of economic operators (that may lead to their exclusion)

Information and formalities necessary for evaluating if the requirements are met: (b) The presentation of balance-sheets or extracts from the balance-sheets, where publication of the balance-sheet is required under the law of the country in which the economic operator is established.
(c) Where appropriate, a statement, covering the 3 previous financial years of the economic operator, of:
(i) the overall turnover of the business of the economic operator; and
(ii) where appropriate, the turnover in respect of the work, works, goods or services which are of a similar type to the subject matter of the contract.
The presentation of balance-sheets or extracts from the balance-sheets, where publication of the balance-sheet is required under the law of the country in which the economic operator is established.
Where appropriate, a statement, covering the 3 previous financial years of the economic operator, of:
(i) the overall turnover of the business of the economic operator; and
(ii) where appropriate, the turnover in respect of the work, works, goods or services which are of a similar type to the subject matter contract.
This will be covered in the dynamic pre-qualification questionnaire.
Minimum level(s) of standards possibly required: A financial assessment will be undertaken on the supplier’s financial status. An overall pass/fail judgement will be made after considering areas such as turnover, profit, net, assets, liquidity, gearing and capacity. This assessment will include the parent company where applicable. An independent financial assessment obtained from a reputable credit rating organisation may be utilised as part of this process.

Criteria regarding the economic and financial standing of subcontractors (that may lead to their rejection)

Information and formalities necessary for evaluating if the requirements are met: The presentation of balance-sheets or extracts from the balance-sheets, where publication of the balance-sheet is required under the law of the country in which the economic operator is established.
Where appropriate, a statement, covering the three previous financial years of the economic operator, of:
(i) the overall turnover of the business of the economic operator; and
(ii) where appropriate, the turnover in respect of the work, works, goods or services which are of a similar type to the subject matter contract.
This will be covered in the dynamic pre-qualification questionnaire.
Minimum level(s) of standards possibly required: A financial assessment will be undertaken on the supplier’s financial status. An overall pass/fail judgement will be made after considering areas such as turnover, profit, net, assets, liquidity, gearing and capacity. This assessment will include the parent company where applicable. An independent financial assessment obtained from a reputable credit rating organisation may be utilised as part of this process.

III.2.3)Technical and/or professional capacity

Criteria regarding the technical and/or professional ability of economic operators (that may lead to their exclusion)

Information and formalities necessary for evaluating if the requirements are met:
(c) A statement of the principal goods sold or services provided by the supplier or the services provider in the past 5 years or during a shorter period if necessary, and:
(i) the dates on which the goods were sold or the services provided;
(ii) the consideration received;
(iii) the identity of the person to whom the goods were sold or the service were provided;
(iv) any certificate issued or countersigned by that person confirming the details of the contract for those goods sold or services provided; and
(v) where:
(a) that person was not a contracting authority, and
(b) the certificate referred to in sub-paragraph (c)(iv) is not available, any declaration by the economic operator attesting the details of the goods sold or services provided.
(e) A statement of the economic operator’s:
(i) technical facilities;
(ii) measures for ensuring quality;
(iii) study and research facilities; and
(iv) internal rules regarding intellectual property.
(h) The environmental management measures, that the economic operator is able to apply when performing the contract, but only where it is necessary for the performance of that contract.
(j) A description of the tools, material, technical equipment, staff numbers, know-how and sources of supply (with an indication of their geographical location when it is outside the territory of the EU) available to the economic operator to perform the contract, cope with any additional needs required by the contracting authority as a result of a crisis or carry out the maintenance, modernisation or adaptation of the goods covered by the contract.
(l) Certification by official quality control institutes or agencies of recognised competence, attesting that the goods to be purchased or hired under the contract conform to standards and technical specifications (within the meaning of regulation 12(1)) identified by the contracting authority.
(m) In the case of contracts involving, entailing or containing classified information, evidence of the ability to process, store and transmit such information at the level of protection required by the contracting authority.
(n) A certificate:
(i) attesting conformity to quality management systems standards based on the relevant European standard; and
(ii) from an independent accredited body established in any member state conforming to the European standards concerning accreditation and certification.
(o) Any other evidence of conformity to quality management systems standards which are equivalent to the standards referred to in sub-paragraph (n)(i).
This will be covered in the dynamic pre-qualification questionnaire.
Minimum level(s) of standards possibly required
This will be covered in the dynamic pre-qualification questionnaire.

Criteria regarding the technical and/or professional ability of subcontractors (that may lead to their rejection)

Information and formalities necessary for evaluating if the requirements are met:
This will be covered in the dynamic pre-qualification questionnaire.
Minimum level(s) of standards possibly required
This will be covered in the dynamic pre-qualification questionnaire.

III.2.4)Information about reserved contracts
III.3)Conditions specific to services contracts
III.3.1)Information about a particular profession
III.3.2)Staff responsible for the execution of the service

Section IV: Procedure

IV.1)Type of procedure

IV.1.1)Type of procedure

Restricted

IV.1.2)Limitations on the number of operators who will be invited to tender or to participate

Envisaged minimum number 2 and maximum number 6
Objective criteria for choosing the limited number of candidates: Maximum number is up to six, regardless of how many operators exceed the minimum score. The authority reserves the right to exclude any tender that does not meet the minimum score of 0, or who scores a zero in any individual question.
IV.1.3)Reduction of the number of operators during the negotiation or dialogue
IV.2)Award criteria
IV.2.1)Award criteria

IV.2.2)Information about electronic auction

An electronic auction has been used: no
IV.3)Administrative information

IV.3.1)File reference number attributed by the contracting authority:

700177316

IV.3.2)Previous publication(s) concerning the same contract

no

IV.3.3)Conditions for obtaining specifications and additional documents or descriptive document

Payable documents: no

IV.3.4)Time limit for receipt of tenders or requests to participate

17.5.2020 – 17:00
IV.3.5)Date of dispatch of invitations to tender or to participate to selected candidates

IV.3.6)Language(s) in which tenders or requests to participate may be drawn up

English.

Section VI: Complementary information

VI.1)Information about recurrence

This is a recurrent procurement: no

VI.2)Information about European Union funds

The contract is related to a project and/or programme financed by European Union funds: no

VI.3)Additional information:

The authority reserves the right to amend any condition related to security of information to reflect any changes in national law or government policy. If any contract documents are accompanied by instructions on safeguarding classified information (e.g. a Security Aspects Letter), the authority reserves the right to amend the terms of these instructions to reflect any changes in national law or government policy, whether in respect of the applicable protective marking scheme, specific protective markings given, the aspects to which any protective marking applies or otherwise. The link below to the Gov.uk website provides information on the Government Security Classification.

https://www.gov.uk/government/publications/government-security-classifications

Advertising regime OJEU: this contract opportunity is published in the Official Journal of the European Union (OJEU), the MoD Defence Contracts Bulletin and www.contracts.mod.uk

Suppliers must read through this set of instructions and follow the process to respond to this opportunity.

The information and/or documents for this opportunity are available on https://www.contracts.mod.uk/delta You must register on this site to respond, if you are already registered you will not need to register again, simply use your existing username and password. Please note there is a password reminder link on the homepage.

Suppliers must log in, go to your response manager and add the following access code: 4BAGC36Q7X. Please ensure you follow any instruction provided to you here.
The deadline for submitting your response(s) is 17 May 2020 17.00. Please ensure that you allow yourself plenty of time when responding to this invite prior to the closing date and time, especially if you have been asked to upload documents.
Go reference: GO-2020417-DCB-16385525.

VI.4)Procedures for appeal

VI.4.1)Body responsible for appeal procedures

Official name: Ministry of Defence, Weapons, International Guns, Missiles and Rockets (IGMR) Project Team
Town: Bristol
Country: United Kingdom
E-mail: harvey.webber100@mod.gov.uk
Telephone: +44 3067934604

Body responsible for mediation procedures

Official name: Ministry of Defence, Weapons, International Guns, Missiles and Rockets (IGMR) Project Team
Town: Bristol
Country: United Kingdom
E-mail: harvey.webber100@mod.gov.uk
Telephone: +44 3067934604

VI.4.2)Lodging of appeals

VI.4.3)Service from which information about the lodging of appeals may be obtained

Official name: Ministry of Defence, Weapons, International Guns, Missiles and Rockets (IGMR) Project Team
Town: Bristol
Country: United Kingdom
E-mail: harvey.webber100@mod.gov.uk
Telephone: +44 3067934604

VI.5)Date of dispatch of this notice:

17.4.2020